Instruction/ maintenance manual of the product 92P1836 IBM
Go to page of 16
Part Number: 92P1836 Important This publication contains product-specific parts information for IBM ThinkPad Dock, ThinkPad Dock II, ThinkPad Port Replicator , ThinkPad Mini Dock, and ThinkPad Port Replicator II products. This publication is intended for trained service personnel who are familiar with ThinkPad products.
T ighten screws as follows: v Plastic to plastic T urn an additional 90 degrees after the screw head touches the surface of the plastic part: 90 degrees more (Cross-section) v Logic card to plastic T .
Removing and replacing a FRU This section presents directions and drawings for use in removing and replacing a FRU. Be sure to observe the following general rules: 1. Do not try to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts.
1010 ThinkPad Dock PCI cover Before replacing the PCI cover: There are two types of ThinkPad Dock, as follows: v ThinkPad Dock: FRU no. 08N1546 (PCI cover: FRU no. 05K6246) v ThinkPad Dock with extension plate: FRU no. 08N1537 (PCI cover: FRU no. 08N7317) Confirm the FRU no.
Note: The following illustration shows how to remove the PCI cover of ThinkPad Dock (FRU no. 08N1546). Do the same to remove the PCI cover of ThinkPad Dock with extension plate (FRU no.
1020 ThinkPad Dock top cover Note This section is only for the ThinkPad Dock (FRU no. 08N1546). The top cover and screw kit for ThinkPad Dock (FRU no. 12P4143) is not available for the ThinkPad Dock with extension plate (FRU no. 08N1537) . 1 (Rear view) Step Screw (quantity) T orque 1 M2.
2 2 2 (Bottom view) Step Screw (quantity) T orque 2 M2.5 × 4.8 mm (8) 0.392 Nm (4 kgfcm) (continued) 7.
Make sure that the system lock key A is set to the Unlock position. Release the front latches in step 3 , and then remove the top cover 4 . For step 5 , see the inside view , shown in the circle. 5 4 3 A When replacing the top cover , do the following: v Make sure that the springs are placed correctly .
v Make sure that the device release lever is seated correctly . v Make sure that the release button works correctly . 9.
2010 ThinkPad Dock II PCI cover 1 2 1 (Bottom view) 10.
2020 ThinkPad Dock II top cover 1 1 1 (Rear view) Step Screw (quantity) T orque 1 M2.5 × 4.8 mm (3) 0.392 Nm (4 kgfcm) 2 2 2 2 Step Screw (quantity) T orque 2 M2.
3 3 (Bottom view) Step Screw (quantity) T orque 3 M2.5 × 4.8 mm (6) 0.392 Nm (4 kgfcm) (continued) 12.
Make sure that the system lock key A is set to the Unlock position. Release the front latches in step 4 , and then remove the top cover 5 .
Parts list FRU P/N CRU ID ThinkPad Dock 08N1546 N ThinkPad Dock with extension plate 08N1537 N ThinkPad Dock II 67P9010 * ThinkPad Mini Dock 67P901 1 * ThinkPad Port Replicator 08N1536 N ThinkPad Port.
Power cords (ThinkPad Dock and ThinkPad Dock II) IBM power cords for a specific country or region are usually available only in that country or region: For 3-pin power cords: Region P/N CRU ID Argentina 36L8868 * Australia, New Zealand 75H8988 Brazil 49P2101 Canada, Thailand, U.
Power cords (ThinkPad Mini Dock) IBM power cords for a specific country or region are usually available only in that country or region: For 2-pin power cords: Region P/N CRU ID Canada, U.
An important point after buying a device IBM 92P1836 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IBM 92P1836 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IBM 92P1836 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IBM 92P1836 you will learn all the available features of the product, as well as information on its operation. The information that you get IBM 92P1836 will certainly help you make a decision on the purchase.
If you already are a holder of IBM 92P1836, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IBM 92P1836.
However, one of the most important roles played by the user manual is to help in solving problems with IBM 92P1836. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IBM 92P1836 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center