Instruction/ maintenance manual of the product 19K4206PT1 IBM
Go to page of 10
P ortable C D-R O M Dr ive IB M USB U ser's Guide.
Note: Before using this information and the product it supports, be sure to read the Laser Safety Guide for CD-ROMs included in this option package, and be sure to read the information under Appendix B, “Product warranties and notices” on page 2-2.
Contents Registering your option ............................ iv About this book ................................ iv Part 1: Installation and usage guide ................ 1-1 Part 2: Appendixes . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Appendix A.
Registering your option Thank you for purchasing this IBM product. P lease take a few moments to register your product and provide us with information that will help IBM to better serve you in the future.
Part 1: Installation and usage guide This guide contains the product description, installation instructions, and product use information. Product description The IBM USB Portable CD-ROM Drive is a slimline CD-ROM drive that attaches quickly and conveniently to your IBM ThinkPad computer through one simple connection.
Front view of the drive Refer to the following illustration to locate controls. 1 Busy indicator This green light glows steadily when the power is turned on and blinks when the drive is active.
Connecting the CD-ROM drive to your computer Follow these instructions to connect the CD-ROM drive. 1. Locate the USB cable included with this option. One connector on the USB cable is smaller than the other and has two small buttons on each side of it.
Windows 98 Follow these instructions to install the device driver for Windows 98. 1. After you have attached the CD-ROM drive to your computer, turn on your computer if it is not turned on already. 2. In the New Hardware Wizard for IBM USB Portable CD-ROM Drive window, click Next .
Uninstalling the Windows 98 device driver If you have installed the Windows 98 device driver and need to uninstall it, follow these instructions. 1. Insert the IBM USB Portable CD-ROM Drive Option Diskette into the diskette drive. 2. Click Start . 3. Select Run .
The device driver is now uninstalled. Your computer will not recognize the CD-ROM drive when it is connected to the computer unless you reinstall the device driver. Disconnecting and reconnecting the CD-ROM drive Hot plugging is supported on the connection between the USB cable and your computer.
An important point after buying a device IBM 19K4206PT1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IBM 19K4206PT1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IBM 19K4206PT1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IBM 19K4206PT1 you will learn all the available features of the product, as well as information on its operation. The information that you get IBM 19K4206PT1 will certainly help you make a decision on the purchase.
If you already are a holder of IBM 19K4206PT1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IBM 19K4206PT1.
However, one of the most important roles played by the user manual is to help in solving problems with IBM 19K4206PT1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IBM 19K4206PT1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
