Instruction/ maintenance manual of the product DW12-BFM ME Hyundai IT
Go to page of 12
Code:0120505275 Domestic Dishwasher DW12-BFM DW12-BFM ME GB.
Safety Is Very Important Close-up View (Control Panel) - Do not lean or sit on the door when it is open as this could over turn the dishwasher. - If the appliance malfunctions, turn off water supply to the appli- ance and disconnect the plug from the wall socket.
Close-up View (Interior) Technical Characteristics Width 60 cm Depth 60 cm Height 85 cm Capacity 12 standard place settings Mains water pressure 0.03-0.
Adjusting Salt Consumption The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of the water used. This is intended to optimise and customise the level of salt consump- tion so that it remains at a minimum.
Detergent and Rinse Aid Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Wash Cycle Table." The detergent dispenser is located on the inside panel the door.
2 1 3 4 Loading the Dishwasher Lower Rack Upper Rack Load for 12 Standard Settings Before placing the dishes in the dishwasher, remove larger food particles to prevent the filter from becoming clogged, which re- sults in reduced performance.
Turning on the Appliance Starting a wash cycle - Make sure that the plug for the appliance is inserted into the wall socket. - Make sure that the water supply is turned on to full pressure. - Load the dishwasher (see the section entitled, "Loading the Dishwasher").
- It is important to try and run the dishwasher when it is fully loaded to save on energy. In order to prevent odors from forming and food from caking onto the dishes, you can run the soak cycle. - Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are.
Wash Cycle Table .8. GB Cycle Button Cycle Selection Information Description of Cycle Deter- gent Rinse Aid Very dirty dishes, pots and pans. (Not to be used with delicate items) Pre-wash of dishes, pots and pans while waiting for the load to be completed after the subse- quent meal.
Cleaning and Special Maintenance Filter Assembly For best performance and results, the filter assembly must be cleaned. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle.
Installation Positioning the Appliance Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to ensure correct installation.
Installation Diagram The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
An important point after buying a device Hyundai IT DW12-BFM ME (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hyundai IT DW12-BFM ME yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hyundai IT DW12-BFM ME - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hyundai IT DW12-BFM ME you will learn all the available features of the product, as well as information on its operation. The information that you get Hyundai IT DW12-BFM ME will certainly help you make a decision on the purchase.
If you already are a holder of Hyundai IT DW12-BFM ME, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hyundai IT DW12-BFM ME.
However, one of the most important roles played by the user manual is to help in solving problems with Hyundai IT DW12-BFM ME. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hyundai IT DW12-BFM ME along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
