Instruction/ maintenance manual of the product YTH2448T Husqvarna
Go to page of 52
03002 917.279200 (YTH2448T) Owner's Manual.
2 I. GENERAL OPERA TION • Read, understand, and f ollow all instructions on the machine and in the manual bef ore star ting. • Do not put hands or f eet near rotating par ts or under the machine.
3 • Be sure the area is clear of bystanders bef ore operat- ing. Stop machine if anyone enters the area. • Nev er carr y passengers. • Do not mow in re verse unless absolutely necessar y . Al wa ys look down and behind bef ore and while back- ing.
4 SAFETY RULES ......................................................... 2-3 PRODUCT SPECIFICA TIONS ....................................... 4 CUST OMER RESPONSIBILITIES ................................. 4 ASSEMBL Y ...................................
5 UNASSEMBLED P AR TS (2) Keys Slope Sheet Key (1) Oil Drain Tube ASSEMBL Y When right or left hand is mentioned in this man ual, it means when you are in the oper ating po si tion (seated be hind the steer ing wheel). T O REMO VE TRA CT OR FR OM CAR TO N UNP A CK CART ON • Remov e all accessible loose par ts and par ts car tons from car ton.
6 ASSEMBL Y CHECK TIRE PRESSURE The tires on your tr actor were ov er infl ated at the f actor y f or shipping pur poses. Correct tire pressure is impor tant f or best cutting performance. • Reduce tire pressure to PSI shown on tires. CHECK DECK LEVELNESS F or best cutting results, mower housing should be properly le veled.
7 OPERA TION These symbols ma y appear on your tractor or in literature supplied with the product. Lear n and understand their mean- ing. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models .
8 OPERA TION KNO W Y OUR TRA CT OR READ THIS O WNER'S MANU AL AND SAFETY RULES BEFORE OPERA TING Y OUR TRA CT OR Compare the illustrations with y our tractor to familiarize y ourself with the locations of various controls and ad just ments. Sav e this manual f or future reference .
9 OPERA TION FIG. 4 T O USE CHOKE CONTROL - N (See Fig. 6) Use choke control whene ver y ou are star ting a cold engine. Do not use to star t a warm engine.
10 OPERA TION T O ADJUST MO WER CUT TING HEIGHT (See Fig. 8) The po si tion of the at tach ment lift le v er (A) de ter mines the cut ting height. • Put attachment lift lev er in desired cutting height slot. The cutting height range is ap pro x i mate ly 1" to 4".
11 OPERA TION FIG. 11 T O WING CARTS AND O THER A T TA C H MENTS T ow only the attachments that are recommended b y and comply with specifi cations of the manufacturer of y our trac- tor . Use common sense when towing. T oo heavy of a load, while on a slope, is dangerous .
12 CA UTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to sep aration and for mation of acids during storage. Acidic gas can dama g e the fuel system of an engine while in storage. T o avoid engine pr oblems, the fuel system should be emptied before stor age of 30 days or longer .
13 FIG. 12 MO WING TIPS • Mower should be properly le veled f or best mowing per- f or mance. See “T O LEVEL MOWER HOUSING” in the Ser vice and Adjustments section of this manual. • The left hand side of mower should be used f or trim- ming. • Drive so that clippings are discharged onto the area that has been cut.
14 MAINTENANCE T R A C T 0 R Inspect Muffler/Spark Arrester Clean Air Filter Change Engine Oil (with oil filter) Replace Air Filter Paper Cartridge Replace Spark Plug Check Engine Oil Level Clean Engine Cooling Fins Clean Air Screen 1 - Change more often when operating under a heavy load or in high ambient temperatures.
15 MAINTENANCE FIG. 13 02544 MANDREL ASSEMBL Y BLADE BLADE BOL T (SPECIAL) CENTER HOLE ST AR B A TTER Y Y our tractor has a batter y charging system which is suf fi cient f or nor mal use. Howe ver , periodic charging of the batter y with an automotiv e charger will extend its lif e.
16 MAINTENANCE V- B E LT S Check V -belts f or deter ioration and wear after 100 hours of operation and replace if necessary . The belts are not ad just able . Re place belts if they begin to slip from w ear . TRANSAXLE COOLING The transmission f an and cooling fi ns should be kept clean to assure proper cooling.
17 MAINTENANCE CLAMP FUEL FIL TER FIG. 16 CLEANING • Clean engine, batter y , seat, fi nish, etc. of all f oreign matter . • K eep fi nished surf aces and wheels free of all gasoline, oil, etc. • Protect painted surfaces with automotiv e type wax.
18 SER VICE AND ADJUSTMENTS CA UTION: After rear lift links are dis- connected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of the lever .
19 • T ur n steer ing wheel to position wheels straight f or- war d. • A TT A CH FRONT LINK (E) - W or k from left side of trac- tor . Inser t rod end of link assembly through front hole in tractor front suspension brac ket (F) and secure with retainer spring (G) through hole in link located behind the brac ket.
20 SER VICE AND ADJUSTMENTS T O LEVEL MO WER Make sure tires are properly infl ated to the PSI shown on tires. If tires are ov er or under infl ated, it may aff ect the appearance of y our lawn and lead you to think the mo wer is not adjusted properly .
21 02966 A A 02548 B B PRECISION SIDE-T O-SIDE ADJUSTMENT (See Fig. 26) • With all tires properly infl ated, par k tractor on le vel ground or drive wa y . CA UTION: Blades are sharp. Protect y our hands with gloves and/or wrap blade with hea vy cloth.
22 SER VICE AND ADJUSTMENTS FIG. 29 T O REPLA CE MO TION DRIVE BEL T (See Fig. 30) P ark the tractor on lev el surface . En gage par king brak e. F or as sis tance, there is a belt installation guide decal on bottom side of left f ootrest. BEL T REMO V AL - • Remov e mow er (See “T O RE MO VE MOWER” in this section of manual).
23 SER VICE AND ADJUSTMENTS FIG. 31 RET AIN ING RING WA S H ERS SQU ARE KEY (REAR WHEEL ONL Y) AXLE CO VER T O ST ART ENGINE WITH A WEAK B A TTER Y (See Fig. 32) W ARNING : Lead-acid batteries gen- erate ex plosive gases. K eep sparks, fl ame and smoking ma terials awa y from batteries.
24 SER VICE AND ADJUSTMENTS T O REPLA CE HEADLIGHT BULB • Raise hood. • Pull bulb holder out of the hole in the backside of the grill. • Replace bulb in holder and push bulb holder securely back into the hole in the bac kside of the grill. • Close hood.
25 ST ORA GE Immediately prepare your tr actor for storage at the end of the season or if the tractor will not be used f or 30 days or more. W ARNING: Never store the trac tor with gasoline in the tank inside a building where fumes may reac h an open fl ame or spark.
26 TR OUBLESHOO TING POINTS Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” proper ly . 2. See “T O ST ART ENGINE” in Operation section. 3. Engine fl ooded. 3. W ait sev eral minutes bef ore attempting to star t. 4. Bad spar k plug.
27 TR OUBLESHOO TING POINTS Engine dies when 1. Rev erse operation system 1. T ur n ignition ke y to tractor is shifted (ROS) is not "ON" while ROS "ON" position. into reverse mower or other attachment See Operation section. is engaged.
28 SER VICE NO TES.
29 M FUSE ST ARTER SOLENOID BA TTER Y ELECTRIC CLUTCH CLUTCH/BRAKE (PED AL UP) REVERSE SWITCH (NO T IN REVERSE) SEA T SWITCH (NO T OCCUPIED) SHORTING CONNECT OR CHASSIS HARNESS IGNITION UNIT HOUR METE.
30 TRA CT OR - MODEL NO . 917.279200 (YTH2448T) ELECTRICAL 30 33 24 42 40 26 28 71 59 194276D 29 34 43 25 27 41 50 Battery _28 8 1 99 100 91 2 27 22 21 16 55 46 46 90.
31 TRA CT OR - MODEL NO . 917.279200 (YTH2448T) ELECTRICAL KEY P ART NO . NO . DESCRIPTION 1 532 14 49-27 Batter y 2 874 76 04-12 Bolt He x Hd 1/4-20 unc x 3/4 8 532 18 64-91 Batter y Bo x 16 532 17 6.
32 TRA CT OR - MODEL NO . 917.279200 (YTH2448T) CHASSIS 14 214 130 130 37 194 194 194 194 181 181 182 68 68 189 216 216 176 176 176 175 178 165 228 228 183 194 184 99 152 150 202 203 204 210 208 18 15.
33 TRA CT OR - MODEL NO . 917.279200 (YTH2448T) CHASSIS KEY P ART NO . NO . DESCRIPTION 5 532 40 18-23 Dash 14 532 40 18-24 Hood 15 532 19 89-07 Lens LH 18 532 40 02-97 Grille 25 532 19 89-06 Lens RH .
34 TRA CT OR - MODEL NO . 917.279200 (YTH2448T) DRIVE 80 56 70 74 220 74 213 171 116 197 196 206 26 207 209 218 216 219 143 186 189 49 187 50 51 190 52 51 51 52 208 210 170 211 211 125 125 166 64 185 .
35 TRA CT OR - MODEL NO . 917.279200 (YTH2448T) DRIVE KEY P ART NO . NO . DESCRIPTION KEY P ART NO . NO . DESCRIPTION 1 - - - - - - T ransaxle , Hydro 354-0510 (See Breakdown) 2 532 12 35-83 K ey 1/4 x 2.5 15 819 13 13-16 W asher 13/32 x 13/16 x 16 Ga.
36 TRA CT OR - MODEL NO . 917.279200 (YTH2448T) STEERING ASSEMBL Y 6 5 13 13 53 8 9 9 8 8 7 7 62 4 35 16 19 63 63 57 60 59 58 28 13 22 64 70 68 69 67 67 66 15 15 14 14 21 51 26 1 45 61 2 6 steering-tex_4-husq KEY P ART NO . NO . DESCRIPTION 1 532 19 39-43 Wheel, Steering 2 532 19 59-68 Axle Asm.
37 TRA CT OR - MODEL NO . 917.279200 (YTH2448T) ENGINE KEY P ART NO . NO . DESCRIPTION NO TE: All component dimensions giv en in U .S. inches 1 inch = 25.
38 TRA CT OR - MODEL NO . 917.279200 (YTH2448T) SEA T ASSEMBL Y 1 532 19 75-26 Seat 2 532 18 01-66 Brac ket Piv ot Fender 3 532 14 06-75 Strap , Asm F ender 5 532 14 50-06 Clip , Push In, Hinged 6 873 80 06-00 Nut, Lock W/Ins.
39 TRA CT OR - MODEL NO . 917.279200 (YTH2448T) DECALS NO TE: All component dimensions given in U .S. inches 1 inch = 25.4 mm KEY P ART NO . NO . DESCRIPTION 6 2 1 3 11 4 10 5 9 8 7 wheel_art_1-vgt WHEELS AND TIRES KEY P ART NO . NO . DESCRIPTION KEY P ART NO .
40 TRA CT OR - MODEL NO . 917.279200 (YTH2448T) MO WER DECK 47 7 50 46 32 33 31 30 1 33 48 52 43 54 97 33 49 39 185 46 46 6 21 122 114 98 31 32 25 26 24 27 194 113 17 21 49 187 190 188 190 187 120 117.
41 TRA CT OR - MODEL NO . 917.279200 (YTH2448T) MO WER DECK KEY P ART NO . NO . DESCRIPTION KEY P ART NO . NO . DESCRIPTION NO TE: All component dimensions given in U .S. inches 1 inch = 25.4 mm 1 532 40 35-82 Deck Weldment Mo wer 6 532 19 72-48 Cov er Mandrel LH 7 532 19 91-02 Cov er Mandrel RH 8 532 17 43-65 Bolt 7/16 Asm.
42 TRA CT OR - MODEL NO . 917.279200 (YTH2448T) MO WER LIFT 7 3 87 10 88 2 89 90 87 98 97 97 91 lift-tex_3 89 87 89 87 2 532 19 52-23 Shaft Asm., Lift 3 532 19 52-30 Le ver Asm.
43 SER VICE NO TES.
44 REP AIR P AR TS TRA CT OR - MODEL NO . 917.279200 (YTH2448T) HYDR O TRANSAXLE - - MODEL NUMBER 354-0510 900.
45 REP AIR P AR TS TRA CT OR - MODEL NO . 917.279200 (YTH2448T) HYDR O TRANSAXLE - - MODEL NUMBER 354-0510 Ke y Part No. No. Description 1 170351 Kit, main housing Main housing, machined Bushing .865 X.985 X.790 2 170352 Kit, side housing Side housing, machined Bushing .
46 REP AIR P AR TS TRA CT OR - MODEL NO . 917.279200 (YTH2448T) BRIGGS ENGINE - MODEL NUMBER 445677, TYPE NUMBER 0413-E1 3 1 2 22 11 9 10 8 51 252 250 1019 LABEL KIT 27 28 27 27 26 25 32 29 24 741 16 .
47 REP AIR P AR TS TRA CT OR - MODEL NO . 917.279200 (YTH2448T) BRIGGS ENGINE - MODEL NUMBER 445677, TYPE NUMBER 0413-E1 35 35 7 7 1022 1022 868 868 192 192 13 1022 1022 798 914 1029 1029 1 100 1 100 .
48 REP AIR P AR TS TRA CT OR - MODEL NO . 917.279200 (YTH2448T) BRIGGS ENGINE - MODEL NUMBER 445677, TYPE NUMBER 0413-E1 358 ENGINE GASKET SET 12 9 51 3 20 7 868 1022 163 691 524 943 276 842 573 405 7.
49 REP AIR P AR TS TRA CT OR - MODEL NO . 917.279200 (YTH2448T) BRIGGS ENGINE - MODEL NUMBER 445677, TYPE NUMBER 0413-E1 KEY P ART NO . NO. DESCRIPTION 1 699753 Cylinder Assembly 2 499585 Kit-Bushing/.
50 REP AIR P AR TS TRA CT OR - MODEL NO . 917.279200 (YTH2448T) BRIGGS ENGINE - MODEL NUMBER 445677, TYPE NUMBER 0413-E1 KEY P ART NO . NO . DESCRIPTION 523 691036 Dipstick 524 691032 • Seal-O Ring .
51 15 DEGREES MAX. FOLD ALO NG DOTTED LINE THIS IS A 15 DEGREE SLOPE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face.
532 40 34-51 Re v . 2 05.17.06 VB/TR/VB Printed in U.S .A. SECTION 1: LIMITED W ARRANTY Husqvarna Forest & Garden Compan y (“Husqvarna”) warrants Husqvarna product to the original purchaser to.
An important point after buying a device Husqvarna YTH2448T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna YTH2448T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna YTH2448T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna YTH2448T you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna YTH2448T will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna YTH2448T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna YTH2448T.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna YTH2448T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna YTH2448T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
