Instruction/ maintenance manual of the product YTH2148 Husqvarna
Go to page of 48
02777 YTH2148 Owner's Manual.
2 I. GENERAL OPERA TION • Read, understand, and f ollow all instructions in the manual and on the machine bef ore star ting. • Only allow responsib le adults, who are f amiliar with the in struc tions, to operate the machine. • Clear the area of objects such as rocks , toys , wire, etc.
3 W ARNING: In order to prevent ac ci - den tal starting when setting up, trans- port ing, ad just ing or making repairs, al ways dis con nect spark plug wire and place wire where it can not contact spark plug. W ARNING: Do not coast do wn a hill in neutral, you ma y lose control of the tractor .
4 PR ODUCT SPECIFICA TIONS Gasoline Capacity 4 Gallons and type: Unleaded Regular Oil T ype (API-SF-SJ): SAE 30 (abov e 32°F) SAE 5W -30 (below 32°F) Oil Capacity: W/ Filter : 4.0 Pints W/O Filter : 3.75 Pints Spark Plug: Champion QC12YC (Gap: .030") Ground Speed (MPH): Forward: 0 – 5.
5 UNASSEMBLED P AR TS Steering Wheel Insert Steering Wheel Steering Wheel Adapter Seat Mower Gauge Wheels (4) Washers 3/8 x 3/4 x 14 Ga. (4) Wheels (4) Adjusting Bars (4) Retainer Springs (double loop.
6 Y our new tractor has been assemb led at the factory with exception of those par ts left unassembled f or shipping pur poses. T o ensure saf e and proper operation of your tr actor all par ts and hardware you assemb le must be tightened securely . Use the correct tools as necessar y to insure proper tightness.
7 ASSEMBLE GA UGE WHEELS T O MO WER DECK (See Fig. 5) The gauge wheels are designed to keep the mo wer deck in proper position when operating mow er . Be sure they are prop er ly adjusted to ensure optimum mower per f or - mance. • Slide gauge wheel bar down into brack et channel, Be sure that gauge wheel bar aligning holes are on top .
8 SHOULDER BOL T AD JUST ING BAR PIN RET AINER SPRING FIG. 5 GA UGE WHEEL 3/8-16 CENTER LOCKNUT ASSEMBL Y 3/8 W ASH ER • For ease of mow er to tractor assembly , raise gauge wheels to highest position and retain with cle vis pins and spring retainers.
9 CHECK TIRE PRESSURE The tires on your tr actor were ov er infl ated at the factory f or shipping pur poses. Correct tire pressure is impor tant f or best cutting performance. • Reduce tire pressure to PSI shown in “PRODUCT SPEC I FI CA TIONS” section of this man ual.
10 These symbols ma y appear on your tractor or in literature supplied with the product. Lear n and understand their mean- ing. OPERA TION DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models.
11 ELAPSED TIME HOURS 1/10 000000000 0 AMPS 60 0 60 02772 OPERA TION KNO W Y OUR TRA CT OR READ THIS O WNER'S MANU AL AND SAFETY RULES BEFORE OPERA TING Y OUR TRA CT OR Compare the illustrations with y our tractor to familiarize y ourself with the locations of various controls and ad just ments.
12 OPERA TION 02774 NO TE: Under cer tain conditions when tractor is standing idle with the engine running, hot engine exhaust gases ma y cause “bro wning” of g rass. T o eliminate this possibility , alwa ys stop engine when stopping tractor on grass areas .
13 OPERA TION 0277 5 LO W POSITION T O OPERA TE MO WER (See Fig. 10) Y our tractor is equipped with an operator presence sensing s witch. Any attempt b y the operator to leav e the seat with the engine running and the attachment clutch engaged will shut off the engine.
14 OPERA TION T O ST ART ENGINE (See Fig. 8) When star ting the engine for the fi rst time or if the engine has run out of fuel, it will take e xtra cranking time to mov e fuel from the tank to the engine. • Be sure freewheel control is in the transmission en gaged position.
15 OPERA TION MO WING TIPS • Mower should be properly lev eled f or best mowing per- f or mance. See “T O LEVEL MO WER HOUSING” in the Ser vice and Adjustments section of this manual. • The left hand side of mower should be used f or trim- ming.
16 BEFORE EACH USE T R A C T 0 R Inspect Muffler/Spark Arrester Lubrication Chart Check Brake Operation Clean Air Filter Change Engine Oil (with oil filter) Replace Air Filter Paper Cartridge Replace .
17 MAINTENANCE TRA CT OR Alwa ys obser ve saf ety rules when performing any main- te nance. BRAKE OPERA TION If tractor requires more than six (6) f eet stopping distance at high speed in highest gear , then brak e must be adjusted. (See “TO ADJUST BRAKE” in the Ser vice and Ad just ments section of this manual).
18 02463 MAINTENANCE TRANSAXLE COOLING The transmission f an and cooling fi ns should be kept clean to assure proper cooling. Do not attempt to clean f an or transmission while engine is running or while the transmission is hot. T o prev ent pos- si ble damage to seals , do not use high pressure water or steam to clean transaxle.
19 MAINTENANCE IN-LINE FUEL FIL TER (See Fig. 17) The fuel fi lter should be re placed once each season. If fuel fi l ter becomes clogged, ob struct ing fuel fl ow to car bu re tor , re place ment is re quired. • With engine cool, remov e fi lter and plug fuel line sec- tions.
20 FIG. 18 SER VICE AND ADJUSTMENTS W ARNING: T O A V OID SERIOUS INJUR Y , BEFORE PERFORMING ANY SER VICE OR AD JUST - MENTS: • Depress clutc h/brake pedal fully and set parking brake. • Place motion control le ver in neutral (N) position. • Place attachment c lutch in “DISENGA GED” position.
21 SER VICE AND ADJUSTMENTS FIG. 20 FIG. 21 FRONT -TO-BA CK ADJUSTMENT (See Figs. 21 and 22) IMPORT ANT : DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLO WING FRONT -T O-BA CK AD JUST MENT IS NECESSARY , BE SURE T O ADJUST BOTH FR ONT LINKS EQU ALL Y SO MO WER WILL ST A Y LEVEL SIDE-T O-SIDE.
22 02514 SER VICE AND ADJUSTMENTS FIG. 23 PRI MA RY IDLER ARM R.H. MANDREL IDLER PUL LEYS ELEC TRIC CLUTCH PUL LEY SPRING ARM RH MAN DREL CO VER RH SUS PEN SION ARM FIG. 24 T O REPLA CE MO WER DRIVE BEL T MO WER DRIVE BEL T REMO V AL (See Fig. 23) • P ar k tractor on a le vel surf ace.
23 01513 FIG. 25 SER VICE AND ADJUSTMENTS T O REPLA CE MO TION DRIVE BEL T (See Fig. 26) P ark the tractor on lev el surface . En gage par king brak e. Fo r a s sis tance, there is a belt installation guide decal on bottom side of left f ootrest. BEL T REMO V AL - • Remov e mower (See “TO RE MO VE MOWER” in this section of manual).
24 00663 02239 SER VICE AND ADJUSTMENTS FIG. 27 ADJUSTMENT BOL T NEUTRAL LOCK GA TE MO TION CONTROL LEVER TRANSAXLE MO TION CONTROL LE VER NEUTRAL ADJUSTMENT (See Fig. 27) The motion control le ver has been pre set at the factory and adjustment should not be necessar y .
25 SER VICE AND ADJUSTMENTS FIG. 31 02778 HOOD HEADLIGHT WIRE CONNECT OR T O REPLA CE HEADLIGHT BULB • Raise hood. • Pull bulb holder out of the hole in the bac kside of the grill. • Replace bulb in holder and push b ulb holder securely back into the hole in the bac kside of the grill.
26 SER VICE AND ADJUSTMENTS ENGINE TO A D JUST THR O TTLE CON TR OL CABLE The throttle control has been preset at the f actor y and ad just ment should not be necessar y . If adjustment is nec- es sar y , see engine manual. TO A D JUST CHOKE CON TR OL The choke control has been preset at the f actor y and ad- just ment should not be necessar y .
27 ST ORA GE Immediately prepare your tr actor for storage at the end of the season or if the tractor will not be used f or 30 days or more. W ARNING: Ne ver store the trac tor with gas o line in the tank inside a building where fumes may reac h an open fl ame or spark.
28 TR OUBLESHOO TING POINTS Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” proper ly . 2. See “T O ST ART ENGINE” in Operation section. 3. Engine fl ooded. 3. Wait se veral min utes before attempting to star t. 4. Bad spar k plug.
29 TR OUBLESHOO TING POINTS Engine continues to run 1. F aulty operator-safety presence control system. 1. Check wiring, switches and connections . If not when operator leaves seat corrected, contact an authorized ser vice center/ with attachment clutc h depar tment.
30 SER VICE NO TES.
31 TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO . 954 57 19-60 SCHEMA TIC BATTERY FUSE RED RED BLACK BLACK BLACK BLACK BLACK NON-REMOVABLE CONNECTIONS REMOVABLE CONNECTIONS BLACK BLACK BROWN .
32 28 29 26 24 42 43 27 27 25 41 27 27 40 33 30 50 REP AIR P AR TS TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO . 954 57 19-60 ELECTRICAL 12 12 11 10 8 2 1 27 46 89 16 D .
33 REP AIR P AR TS TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO . 954 57 19-60 ELECTRICAL KEY P ART NO . NO . DESCRIPTION 1 532 14 49-27 Batter y 2 874 76 04-12 Bolt Hex Hd 1/4-20 unc x 3/4 8 532 12 48-86 Batter y T ra y 10 532 14 52-11 Bolt 1/4-20 x 7.
34 REP AIR P AR TS TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO . 954 57 19-60 CHASSIS AND ENCLOSURES 58 74 10 30 208 13 208 11 209 31 1 209 2 144 26 26 60 26 144 26 10 209 142 209 142 143 60.
35 REP AIR P AR TS TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO . 954 57 19-60 CHASSIS AND ENCLOSURES 1 532 17 46-19 Chassis Stamping 2 532 17 65-54 Drawbar 9 532 19 02-51 Dash P/L M 10 872 1.
36 REP AIR P AR TS TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO . 954 57 19-60 DRIVE 29 28 30 52 32 37 53 35 55 36 62 35 36 22 34 16 1 77 77 84 16 263 71 200 73 16 263 199 32 30 52 57 96 26 2.
37 REP AIR P AR TS TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO . 954 57 19-60 DRIVE KEY P ART NO . NO . DESCRIPTION KEY P ART NO . NO . DESCRIPTION NO TE: All component dimensions give in U .
38 REP AIR P AR TS TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO . 954 57 19-60 STEERING ASSEMBL Y 5 5 4 3 43 95 43 8 10 40 32 11 8 6 87 46 46 8 6 87 29 88 71 17 43 91 2 94 40 11 68 67 67 67 13 65 68 15 15 15 29 29 82 38 12 39 1 41 37 36 37 steering_pl.
39 REP AIR P AR TS TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO . 954 57 19-60 STEERING ASSEMBL Y KEY P ART NO . NO . DESCRIPTION 1 532 16 66-27 Wheel Steer ing 2 532 18 47-06 Axle 3 532 16 98-40 Spindle Asm LH 4 532 16 98-39 Spindle Asm RH 5 532 12 49-31 Bear ing Race Thrust Harden 6 532 12 17-48 Washer 25/32 x 1-5/8 x 16 Ga.
40 1 24 16 15 12 13 17 25 4 3 8 9 7 8 9 7 11 2 6 22 21 5 10 5 14 seat_lt.knob_1 REP AIR P AR TS TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO .
41 REP AIR P AR TS TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO . 954 57 19-60 DECALS 10 4 9 6 11 14 6 2 1 5,8 4,10 3,9 11 7 wheel_1 WHEELS & TIRES 12 5 2 2 3 1 KEY P ART NO .
42 REP AIR P AR TS TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO . 954 57 19-60 ENGINE 2 1 OPTIONAL EQUIPMENT Spark Arrester 29 10 6 5 72 13 26 25 4 8 23 45 32 31 33 37 33 engine-bs.twin_43 41 112 17 17 3 81 14 38 NO TE: All component dimensions given in U .
43 4 5 6 2 3 1 6 5 4 7 18 17 16 15 54 54 13 12 11 13 13 31 53 32 32 13 52 49 49 51 51 13 13 20 8 lift-rh.1piece_21 REP AIR P AR TS TRA CT OR - MODEL NO .
44 REP AIR P AR TS TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO . 954 57 19-60 MO WER DECK 132 91 94 182 95 183 132 48_nose_rol ler 57 56 118 116 119 5 117 46 45 33 46 45 33 30 30 32 21 20 18.
45 REP AIR P AR TS TRA CT OR - MODEL NO . YTH2148 (YTH2148A), PRODUCT NO . 954 57 19-60 MO WER DECK KEY P ART NO . NO . DESCRIPTION KEY P ART NO . NO . DESCRIPTION NO TE: All component dimensions given in U .S. inches 1 inch = 25.4 mm 1 532 18 33-89 Deck W eldment Mower 48 3 532 13 80-17 Brack et Asm.
46 15 DEGREES MAX. F O L D A L O N G D O T T E D L IN E T H IS IS A 15 D E G R E E S L O P E ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face.
47 SECTION 1: LIMITED W ARRANTY Husqvarna Forest & Garden Compan y (“Husqvarna”) warrants Husqvarna product to the original purchaser to be free from defects in material and workmanship from t.
532 18 99-04 11.11.03 RD Printed in U.S .A. 01960_husqvarn a.
An important point after buying a device Husqvarna YTH2148 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna YTH2148 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna YTH2148 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna YTH2148 you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna YTH2148 will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna YTH2148, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna YTH2148.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna YTH2148. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna YTH2148 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
