Instruction/ maintenance manual of the product YTH20F42T Husqvarna
Go to page of 44
03002 YTH20F42T Owner's Manual.
2 I. GENERAL OPERA TION • Read, understand, and f ollow all instructions on the machine and in the manual bef ore star ting. • Do not put hands or f eet near rotating par ts or under the machine.
3 • Be sure the area is clear of bystanders bef ore operat- ing. Stop machine if anyone enters the area. • Nev er carr y passengers. • Do not mow in re verse unless absolutely necessar y . Al wa ys look down and behind bef ore and while back- ing.
4 SAFETY RULES ......................................................... 2-3 PRODUCT SPECIFICA TIONS ....................................... 4 CUST OMER RESPONSIBILITIES ................................. 4 ASSEMBL Y ...................................
5 UNASSEMBLED P ARTS (2) Keys Slope Sheet Key (1) Oil Drain Tube ASSEMBL Y When right or left hand is mentioned in this man ual, it means when you are in the oper ating po si tion (seated be hind the steer ing wheel). T O REMO VE TRA CT OR FR OM CAR TO N UNP A CK CART ON • Remov e all accessible loose par ts and par ts car tons from car ton.
6 ASSEMBL Y CHECK TIRE PRESSURE The tires on your tr actor were ov er infl ated at the f actor y f or shipping pur poses. Correct tire pressure is impor tant f or best cutting performance. • Reduce tire pressure to PSI shown on tires. CHECK DECK LEVELNESS F or best cutting results, mower housing should be properly le veled.
7 OPERA TION These symbols ma y appear on your tractor or in literature supplied with the product. Lear n and understand their mean- ing. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models .
8 OPERA TION KNO W Y OUR TRA CT OR READ THIS O WNER'S MANU AL AND SAFETY RULES BEFORE OPERA TING Y OUR TRA CT OR Compare the illustrations with y our tractor to familiarize y ourself with the locations of various controls and ad just ments. Sav e this manual f or future reference .
9 OPERA TION FIG. 4 The operation of any tractor can result in f oreign objects thrown into the e yes, which can result in severe e ye dam age. Al ways wear safety glass es or eye shields while operating y our tractor or per for m ing any ad just ments or repairs.
10 OPERA TION T O ADJUST MO WER CUT TING HEIGHT (See Fig. 8) The po si tion of the at tach ment lift le ver (A) de ter mines the cut ting height. • Put attachment lift lev er in desired cutting height slot. The cutting height range is ap pro x i mate ly 1" to 4".
11 OPERA TION FIG. 11 T O WING CARTS AND O THER A T TA C H MENTS T ow only the attachments that are recommended b y and comply with specifi cations of the manuf acturer of your trac- tor . Use common sense when towing. T oo heavy of a load, while on a slope, is dangerous .
12 ADD GASOLINE • Fill fuel tank to bottom of fi ller neck. Do not overfi ll. Use fresh, clean, regular un lead ed gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead o xide deposits and reduce valv e life).
13 FIG. 12 MO WING TIPS • Mower should be properly le veled f or best mowing per- f or mance. See “T O LEVEL MOWER HOUSING” in the Ser vice and Adjustments section of this manual. • The left hand side of mower should be used f or trim- ming. • Drive so that clippings are discharged onto the area that has been cut.
14 MAINTENANCE T R A C T 0 R Inspect Muffler/Spark Arrester Clean Air Filter Change Engine Oil (with oil filter) Replace Air Filter Paper Cartridge Replace Spark Plug Check Engine Oil Level Clean Engine Cooling Fins Clean Air Screen 1 - Change more often when operating under a heavy load or in high ambient temperatures.
15 MAINTENANCE FIG. 13 025 44 MANDREL ASSEMBL Y BLADE BLADE BOL T (SPECIAL) CENTER HOLE ST AR B A TTER Y Y our tractor has a batter y charging system which is suf fi cient f or nor mal use. Howe ver , periodic charging of the batter y with an automotiv e charger will extend its lif e.
16 MAINTENANCE V- B E LT S Check V -belts f or deter ioration and wear after 100 hours of operation and replace if necessary . The belts are not ad just able . Re place belts if they begin to slip from w ear. TRANSAXLE COOLING The transmission f an and cooling fi ns should be kept clean to assure proper cooling.
17 MAINTENANCE MUFFLER Inspect and replace corroded muffl er and spark arrester (if equipped) as it could create a fi re hazard and/or dam- age. SP ARK PLUGS Replace spark plugs at the beginning of each mowing season or after e ver y 100 hours of operation, whiche ver occurs fi rst.
18 SER VICE AND ADJUSTMENTS FIG. 17 W ARNING: T O A V OID SERIOUS INJUR Y , BEFORE PERFORMING ANY SER VICE OR AD JUST - MENTS: • Depress brake pedal fully and set parking brake. • Place attachment c lutch in “DISENGA GED” position. • T urn ignition key to “ST OP” and remove ke y .
19 SER VICE AND ADJUSTMENTS A B C D FIG. 18 FIG. 19 • A TT A CH REAR LIFT LINKS (C) - Lift rear cor ner of mower and position slot in link assemb ly ov er pin on rear mower br ack et (D) and secure with washer and retainer spring. • Repeat on opposite side of tractor .
20 SER VICE AND ADJUSTMENTS 02966 A A 02548 B B NO TE: Each full tur n of the adjustment nut will change mower height about 1/8". • Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lo wer than the rear tip .
21 SER VICE AND ADJUSTMENTS T O REPLA CE MO TION DRIVE BEL T (See Fig. 27) P ark the tractor on lev el surface . En gage parking brake. Fo r as sis tance, there is a belt installation guide decal on bottom side of left f ootrest. BEL T REMO V AL - • Remov e mower (See “TO RE MO VE MOWER” in this section of manual).
22 SER VICE AND ADJUSTMENTS FIG. 28 RE TA I N ING RING WA S H ERS SQU ARE KEY (REAR WHEEL ONL Y) AXLE CO VER T O ST ART ENGINE WITH A WEAK B A TTER Y (See Fig. 29) WA R N I N G : Lead-acid batteries g en- er ate ex plo sive gases. K eep sparks, fl ame and smoking ma te ri als awa y from bat ter ies.
23 SER VICE AND ADJUSTMENTS T O REMO VE HOOD AND GRILL ASSEMBL Y (See Fig. 31) • Raise hood. • Unsnap headlight wire connector . • Stand in front of tractor . Grasp hood at sides, tilt to ward engine and lift off of tractor . • T o replace, re verse abo ve procedure.
24 ST ORA GE Immediately prepare your tr actor for storage at the end of the season or if the tractor will not be used f or 30 days or more. W ARNING: Never store the trac tor with gas o line in the tank inside a building where fumes may reac h an open fl ame or spark.
25 TR OUBLESHOO TING POINTS Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly . 2. See “T O ST ART ENGINE” in Operation section. 3. Engine fl ooded. 3. Wait se veral min utes before attempting to star t. 4. Bad spark plug.
26 TR OUBLESHOO TING POINTS Engine dies when 1. Rev erse operation system 1. T ur n ignition ke y to tractor is shifted (ROS) is not "ON" while ROS "ON" position. into reverse mower or other attachment See Operation section. is engaged.
27 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 SCHEMA TIC M FUSE ST ARTER SOLENOID BA TTER Y ELECTRIC CLUTCH CLUTCH/BRAKE (PED AL UP) REVERSE SWITCH (NO T IN REVERSE) SEA.
28 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 ELECTRICAL 30 33 24 42 40 26 28 71 194276F 29 34 43 25 27 41 50 Battery _28 8 1 99 100 91 2 27 22 21 16 55 46 46 90.
29 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 ELECTRICAL KEY P ART NO . NO . DESCRIPTION 1 532 14 49-27 Batter y 2 874 76 04-12 Bolt He x Hd 1/4-20 unc x 3/4 8 532 18 64.
30 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 CHASSIS 184 183 165 99 2 180 17 14 214 130 130 37 194 194 181 181 182 176 176 175 178 150 202 203 204 210 208 18 15 25 207 .
31 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 CHASSIS KEY P ART NO . NO . DESCRIPTION 2 532 40 11-40 Dra wbar 5 532 40 32-05 Dash 14 532 40 18-24 Hood 15 532 19 89-07 Lens LH 17 817 06 06-12 Screw 3/8-16 x .
32 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 DRIVE 80 56 70 74 220 74 213 171 197 196 206 26 207 209 186 189 49 187 50 51 190 52 51 51 52 208 153 210 170 211 211 125 12.
33 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 DRIVE KEY P ART NO . NO . DESCRIPTION KEY P ART NO . NO . DESCRIPTION 1 - - - - - - T ransaxle , Hydro 354-0510 (Order Parts from T ransaxle Manu- f acturer) 2 532 12 35-83 K ey 15 819 13 13-16 W asher 13/32 x 13/16 x 16 Ga.
34 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 STEERING ASSEMBL Y 6 55 5 13 13 53 8 9 9 8 8 7 7 62 4 35 16 19 63 63 57 60 59 58 28 13 22 64 50 50 70 65 68 69 67 54 67 66 .
35 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 STEERING ASSEMBL Y KEY P ART NO . NO . DESCRIPTION 1 532 19 39-43 Wheel, Steering 2 532 19 59-68 Axle Asm., F ront 4 532 19 79-37 Spindle Asm., LH 5 532 19 79-36 Spindle Asm.
36 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 SEA T ASSEMBL Y 1 532 19 75-26 Seat 2 532 18 01-66 Brac ket Piv ot Fender 3 532 14 06-75 Strap , Asm F ender 5 532 14 50-06 Clip , Push In, Hinged 6 873 80 06-00 Nut, Lock W/Ins.
37 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 DECALS NO TE: All component dimensions given in U .S. inches 1 inch = 25.4 mm KEY P ART NO . NO . DESCRIPTION 6 2 1 3 11 4 10 5 9 8 7 wheel_art_1-tex WHEELS AND TIRES KEY P ART NO .
38 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 ENGINE 1 99 64 29 SPARK ARRESTER KIT 92 45 21 20 94 86 69 83 engine-tex_9-k ohl 2 81 82 18 15 37 28 37 12 11 41 42 95 90 9 .
39 KEY P ART NO . NO . DESCRIPTION NO TE: All component dimensions given in U .S. inches 1 inch = 25.4 mm F or engine ser vice and replacement par ts, call the toll free number f or your engine manuf acturer listed below: Briggs & Stratton 1-800-233-3723 K ohler Co .
40 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 MO WER DECK 15 14 13 11 8 16 68 30 31 32 33 145 190 34 55 56 57 62 188 189 1 69 21 21 21 69 69 20 59 40 19 19 6 6 42_D_elec.
41 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 MO WER DECK KEY P ART NO . NO . DESCRIPTION KEY P ART NO . NO . DESCRIPTION NO TE: All component dimensions given in U .
42 TRA CT OR - MODEL NO . YTH20F42T (96043000500), PRODUCT NO . 960 43 00-05 MO WER LIFT 7 3 87 10 88 2 89 90 87 98 97 97 91 lift-tex_3 2 532 19 52-23 Shaft Asm.
43 15 DEGREES MAX. FOLD ALONG DOTTED LINE THIS IS A 15 DEGREE SLO PE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face.
SECTION 1: LIMITED W ARRANTY Husqvarna Forest & Garden Compan y (“Husqvarna”) warrants Husqvarna product to the original purchaser to be free from defects in material and workmanship from the .
An important point after buying a device Husqvarna YTH20F42T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna YTH20F42T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna YTH20F42T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna YTH20F42T you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna YTH20F42T will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna YTH20F42T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna YTH20F42T.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna YTH20F42T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna YTH20F42T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
