Instruction/ maintenance manual of the product QC 520 Husqvarna
Go to page of 10
BREEZE QC 520, QC 620, QC 720 USER MANU AL.
Fläkten är tillverkad i moduler så att endast små detaljer behöver bytas vid eventuell service. V entilatoren er bygget opp av moduler slik at det kun er nødvendig å bytte små detaljer ved eventuelt behov for service. Emhætten er frem stillet i moduler , så de enkelte del kan udskiftes ved hætter evt.
31 Contents Safety instructions .................................................... 31 Description of the cooker hood ................................ 32 Using the cooker hood .............................................. 33 Maintenance and cleaning .
32 Description of the cooker hood The cooker hood Control panel Motorhouse Duct Grease filter Work light Functions There are two possible systems: Extraction of air to outside using optional venting kit and evacuation duct. Recirculation using optional carbon filter.
33 Using the cooker hood Maintenance and cleaning Fig. 1 On and Off switch. Speed adjustment switch. Lighting switch, on and off. The control panel The control panel is under the cooker hood. Best results are obtained by using low speed for normal conditions and high speed when smells and steam are more concentrated.
34 2 1 A B Fig. 2 Cleaning the motor cover It is also possible to clean the motor cover (Fig. 2): Remove the grease filter. Remove the inlet ring (A) by turning it anti- clockwise. Remove the fan wheel by unscrewing the centre nut (B) on the fan wheel.
35 Technical data Model QC 520 QC 620 QC 720 Airflow Max. 320 m ³/h x) 180 m ³/h 320 m ³/h x) 180 m ³/h 320 m ³/h x) 180 m ³/h Min. 160 m ³/h 160 m ³/h 160 m ³/h Size Height 45 mm 45 mm 4 5 mm Width 498 mm 598 mm 698 mm Depth 445 mm 445 mm 445 mm Light Max 11 W PL Max 11 W PL Max 11 W PL Grease filter 1 pc.
36 B C A A B C A B C D Mounting of cooker hood in a cupboard, Alt. 2 (Fig. 7): Cut an opening in the underside of the cupboard. Use the template printed on the packaging. Mount the cooker hood with two screws (A) and the spacers (B). Fit the plastic covers (C).
37 B A C Fig. 11 A B C Fig. 10 Mounting the cold air valve (Fig. 10): Not applicable for recirculation. The cold air valve consists of a damper seat with two valves, which shall be fitted into the hood outlet.
©1998 MO-STF 821 27 45-02/2.
An important point after buying a device Husqvarna QC 520 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna QC 520 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna QC 520 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna QC 520 you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna QC 520 will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna QC 520, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna QC 520.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna QC 520. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna QC 520 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
