Instruction/ maintenance manual of the product LZF6127 Husqvarna
Go to page of 76
English Operator Manual LZF5227 / 966956701 LZF6127 / 966956801 Please read the operator ’s manual carefully and make sure you understand the instructions before using the machine.
©2008 HTC. All rights reserved. Beatrice, NE. Printed in U.S.A..
CONTENTS English - 3 INTRODUCTION ................................................................ 5 General ........................................................................ 5 Driving and T ransport on Public Roads ....................... 5 T owing.
W ARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower .
INTRODUCTION English -5 Congratulations Thank you for purchasing a Husqvarna ride-on mower . This machine is built for superior efciency to rapidly mow primarily large areas. A control panel easily accessible to the operator and a hydrostatic transmission regulated by steering controls both contribute to the machine’s performance.
INTRODUCTION English -6 Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer .
English - 7 SYMBOLS AND DECALS These symbols are found on the machine and in the operator ’s manual. Study them carefully so that you know what they mean. Used in this publication to notify the reader of a risk of personal injury or death , particularly if the reader should neglect to follow instructions given in the manual.
English - 8 SYMBOLS AND DECALS Read Shut off engine and Keep a safe Use on slopes No passengers Operator ’s remove key before distance from no greater Manual performing any the machine than 10° mai.
SAFETY English -9 Safety Instructions These instructions are for your safety . Read them carefully . IMPORT ANT : THIS CUTTING MACHINE IS CAP ABLE OF AMPUT A TING HANDS AND FEET AND THROWING OBJECTS. F AILURE TO OBSER VE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESUL T IN SERIOUS INJURY OR DEA TH.
SAFETY English -10 W ARNING! Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer , birth defects, or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas.
SAFETY English -1 1 W ARNING! When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen.
SAFETY English -12 Be extra cautious when driving on slopes 801 1-509 Never allow children to operate the machine 801 1-517 Keep children away from work area 801 1-518 • Do not try to stabilize the machine by putting your foot on the ground. • Do not mow near drop-offs, ditches, or embankments.
SAFETY English -13 Safe Handling of Gasoline T o avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely ammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes, and other sources of ignition.
SAFETY English -14 Never drive the machine in an enclosed space 801 1-515 W ARNING! The battery contains lead and lead compounds, chemicals that are considered to cause cancer , birth defects, and other reproductive system damage. W ash your hands after handling the battery .
SAFETY English -15 • Ensure that nuts and bolts, especially the fastening bolts for the blade attachments, are properly tightened, torqued and that the equipment is in good condition. • Do not modify safety equipment. Check regularly to be sure it works properly .
SAFETY English -16 801 1-515 Clean the machine regularly IMPORT ANT INFORMA TION The parking brake is not sufcient to lock the machine in place during transport. Ensure that the machine is well fastened to the transport vehicle. Always reverse the machine onto the transport vehicle to avoid tipping it over .
SAFETY English -17 Roll over Protection system (ROPS) The ROPS increases the basic weight of the unit by 42 lbs/19 kg. The ROPS on the US units are standard, on the European units the ROPS is an accessory . Do not use ROPS as a lifting, attaching or • anchoring point.
CONTROLS English -18 This operator ’s manual describes the Husqvarna Zero T urn Rider . The rider is tted with a Kohler four-stroke overhead valve engine developing 30 horse power*. T ransmission from the engine is made via two belt- driven hydraulic pumps, which in turn drive a hydraulic motor for each drive wheel.
CONTROLS English -19 801 1-789 Steering controls W ARNING! The machine can turn very rapidly if one steering control is moved much further forward than the other . Motion Control Levers The machine’s speed and direction are continuously variable using the two steering controls.
CONTROLS English -20 Hour meter The hour meter displays the total operating time. It will ash CHG OIL (Change Oil) at 50 hour intervals. The ash duration is one hour before and one hour after the interval. The CHG OIL icon will come on and shut off automatically .
CONTROLS English -21 Fuses The fuses are located in a holder to the left of the hydraulic tank. They are at pin fuses of the same type used in automobiles. There are three fuses as well as a socket for one spare fuse. Fuse ratings and functions: • 20 A, Primary fuse.
CONTROLS English -22 W ARNING! Gasoline is highly ammable. Observe caution and ll the tank outdoors (see the safety instruction). W ARNING! The engine and the exhaust system, become very hot during operation.
CONTROLS English -23 Seat Lock Under the rear section of the seat is a lock device to lock the seat into a folded position. The seat has a linked xture at the front edge and can be folded forward when the lock is pushed. 801 1-440 Seat lock Fuel shut off valve The fuel shut off valve is located at the right rear of the seat.
CONTROLS English -24 Lifting Lever for the Mower Deck The lifting lever is used to place the mower deck in the transport position or one of the 17 different cutting height positions.
CONTROLS English -25 IMPORT ANT INFORMA TION In order to obtain an even cutting height it is important that the air pressure in all four tires is the same 15 psi (1 bar). Mulching For mulching, there is a BioClip attachment available. The BioClip is mounted underneath the mower deck and includes control plates and BioClip blades.
OPERA TION English -26 Read the “Safety Instructions” section and the following pages if you are unfamiliar with the machine. T raining Zero turn mowers are far more maneuverable than typical riding mowers due to their unique steering capabilities.
OPERA TION English -27 801 1-527 Start conditions 801 1-753 Raise the mower deck Starting the Engine 1. Sit on the seat. 2. Raise the mower deck by pulling the lifting lever backward to the locked position (transport position). 3. Activate the parking brake.
OPERA TION English -28 4. Disengage the mower blades by depressing the blade switch. 5. Move the steering controls outward to the locked (outer) neutral position.
OPERA TION English -29 7. If the engine is cold, the choke control should be pushed forward to the choke position. 9. Press in and turn the ignition key to the start position. 801 1-742 T urn to the start position 801 1-508 Set the choke control 8. Open the valve for the selected fuel tank.
OPERA TION English -30 10. When the engine starts, immediately release the ignition key back to the run position. IMPORT ANT INFORMA TION Do not run the starter for more than 5 seconds each time. If the engine does not start, wait about 10 seconds before retrying.
OPERA TION English -31 W ARNING! Lead-acid batteries generate explosive gases. Keep sparks, ame and smoking materials away from batteries. Always wear eye protection when around batteries. IMPORT ANT INFORMA TION Y our mower is equipped with a 12-volt negative grounded system.
OPERA TION English -32 W ARNING! Ensure that no one is near mower when engaging blade switch. IMPORT ANT INFORMA TION The mower deck’ s gauge wheels should be evenly adjusted. 801 1-561 Select the cutting height Running 1. Release the parking brake by moving the lever downward.
OPERA TION English -33 W ARNING! Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes. IMPORT ANT INFORMA TION Control levers return to neutral when released.
OPERA TION English -34 W ARNING! Clear the lawn of stones and other objects that can be thrown out by the blades. W ARNING! Never drive the rider on terrain that slopes more than 10 degrees. Mow slopes up and down, never side to side. A void sudden directional changes.
OPERA TION English -35 IMPORT ANT INFORMA TION Leaving the ignition switch in any other position than “OFF” will cause the battery to be discharged and the hour meter to accumulate hours.
English - 36 MAINTENANCE Maintenance Before After Daily W eekly At least once each year Maintenance interval in hours 25 50 100 300 u 1) First change after 5-8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours.
English - 37 MAINTENANCE W ARNING! Before performing any service or adjustment checklist: • Engage the parking brake. • Place the Blade-switch in the disengaged position. • T urn the ignition switch to “OFF” position and remove the key . • Make sure the blades and all moving parts have completely stopped.
English - 38 MAINTENANCE Battery Y our mower is equipped with a maintenance free battery and does not need servicing. However , periodic charging of the battery with an automotive type battery charger will extend its life. • Keep battery and terminals clean.
English - 39 MAINTENANCE Ignition System The engine is equipped with an electronic ignition system. Only the spark plug requires maintenance. For recommended spark plugs, see T echnical Data. 1. Remove the ignition cable boot and clean around the spark plug.
English - 40 MAINTENANCE 801 1-553 Safety system Start motor Works Ignition system Does not work.
English - 41 MAINTENANCE Engine Cooling Air Intake Check that the engine’s cooling air intake is free from leaves, grass, and dirt. If the cooling air intake is clogged, engine cooling deteriorates, which can lead to engine damage.
English - 42 MAINTENANCE Air Filter If the engine seems weak or runs unevenly , the air lter may be clogged. If running with a dirty air lter , the spark plugs can become fouled. For this reason, it is important to replace the air lter regularly (see the heading Maintenance Schedule for the proper service interval).
English - 43 MAINTENANCE IMPORT ANT INFORMA TION The end cover must be installed with the rubber valve pointing downwards or the rubber valve will not function. Pull the main lter (outer) lter out. 1. Remove the inner lter . 2. Clean inside the lter housing, cover 3.
English - 44 MAINTENANCE Fuel Filter Replace the line-mounted fuel lter every 100 hours (once per season) or more often if it becomes clogged. Move the hose clamps away from the lter . Use 1. at-nosed pliers. Pull the lter loose from the hose ends.
English - 45 MAINTENANCE V -belts Check every 100 hours of operation. Check for severe cracking and large nicks. NOTE: The belt will show some small cracks in normal operation. The belts are not adjustable. Replace belts if they begin to slip from wear .
English - 46 MAINTENANCE Pump Belt Check belt every 100 hours for excessive wear . T o replace belt. Relieve tension on the deck belt and remove deck belt from clutch. See “Deck belt” section. Loosen bolt on the clutch tie down and rotate out of the way .
English - 47 MAINTENANCE Blades In order to attain the best mowing effect, it is important that the blades are well sharpened and not damaged. W ARNING! Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling.
English - 48 MAINTENANCE Adjusting the Mower Deck W ARNING! Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling. W ARNING! Before performing any service or adjustment checklist: 1. Engage the parking brake.
English - 49 MAINTENANCE Cleaning and W ashing Regular cleaning and washing, especially under the mower deck, will increase the machine’s life-span. Make it a habit to clean the machine directly after use (after it is cooled), before the dirt sticks.
LUBRICA TION English -50 Lubrication Schedule General Remove the ignition key to prevent unintentional movements during lubrication. When lubricating with an oil can, it must be lled with engine oil. When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulphide grease.
LUBRICA TION English -51 Lubricating the Cables If possible, grease both ends of the cables and move the controls to end stop positions when lubricating. Ret the rubber covers on the cables after lubrication. Cables with sheaths will bind if they are not lubricated regularly .
LUBRICA TION English -52 Engine Oil Changing the Engine Oil IMPORT ANT INFORMA TION Used engine oil is a health hazard and must not be disposed of on the ground or in nature; it should always be disposed of at a workshop or appropriate disposal location.
LUBRICA TION English -53 Checking the Oil Level 801 1-471 Oil dipstick 8009-159 Level marking The importance of checking and maintaining the proper oil level in the crankcase cannot be overemphasized. Check oil before each use as follows: 1. Make sure the engine is stopped, level, and cool so the oil has had time to drain into the oil pan.
LUBRICA TION English -54 801 1-046 Viscosity grades table Oil Recommendations Using the proper type and weight of oil in the crankcase is extremely important. So is checking oil daily and changing oil regularly . Failure to use the correct oil, or using dirty oil, causes premature engine wear and failure.
LUBRICA TION English -55 Throttle and Choke Cables, Lever Bearings Lubricate the cable ends by the carburetor with the oil can. Move the controls to the end points and lubricate again. The throttle cable is also lubricated by the control when the control console is removed.
LUBRICA TION English -56 Steering Control Shafts T ip the driver ’s seat. Lubricate with a grease gun, one zerk for each steering control shaft, until the grease is forced out. Use only good quality molybdenum disulphide grease. Grease from well-known brand names (petrochemical companies, etc.
TROUBLESHOOTING GUIDE English -57 Problem Cause The engine will not start. • The blade switch is engaged. • The steering controls are not locked in the neutral position. • The driver is not sitting in the driver ’s seat. • The parking brake is not activated.
TROUBLESHOOTING GUIDE English -58 The engine seems weak. • Clogged air lter . • Fouled spark plugs. • Carburetor incorrectly adjusted. The engine overheats. • Clogged air intake or cooling ns. • Engine overloaded. • Poor ventilation around engine.
English -59 ST ORAGE Winter Storage At the end of the mowing season, the machine should be readied for storage (or if it will not be in use for longer than 30 days). Fuel allowed to stand for long periods of time (30 days or more) can leave sticky residues that can plug the carburetor and disrupt engine function.
English -60 WIRING DIAGRAMS B S A1 A2 L M G 20 AMP 7.5 AMP ELECTRIC CLUTCH ACCESSORY OUTLET HOURMETER SOLENOID PTO SWITCH B S A1 A2 L M G B S A1 A2 L M G B S A1 A2 L M G B S A1 A2 L M G ENGINE GROUND .
English -61 TECHNICAL DA T A Engine Manufacturer T ype Power Lubrication Oil capacity excluding lter Oil capacity including lter Engine oil (See viscosity diagram) Fuel Fuel tank capacity Spark .
English -62 TECHNICAL DA T A Cutting Width Cutting Height Uncut Circle Number of Blades Blade Length Nose Rollers Sprung Seat Hinged Arm Rests Hour Meter Blade Engagement Deck Construction Productivit.
English -63 TECHNICAL DA T A Accessories Head lights BioClip attachment (Mulch clip) Collection system T orque Specications Engine crankshaft bolt 50 ft/lb (67 Nm) • Deck pulley bolts 45 ft/lb (6.
English -64 CONFORMITY CERTIFICA TES USA requirements Labels are placed on the engine and/or in the engine compartment stating that the machine will fulll the requirements. This is also applicable to special requirements for any of the states, (California emission rules etc.
SER VICE JOURNAL English - 65 Action Date, mtr reading, stamp, sign Delivery Service 1. Charge the battery . 2. Adjust the tire pressure of all wheels to 15 PSI (1 bar). 3. Mount the steering controls in the normal position. 4. Connect the contact box to the cable for the seat’s safety switch.
SER VICE JOURNAL English - 66 Action Date, mtr reading, stamp, sign After the First 5-8 Hours 1. Change engine oil..
SER VICE JOURNAL English - 67 Action Date, mtr reading, stamp, sign 25-Hour Service 1. Check the fuel pump’s air lter . 2. Sharpen/Replace mower blades if required. 3. Check the tire pressures. 4. Check battery with cables. 5. Lubricate according to lubrication chart.
SER VICE JOURNAL English - 68 Action Date, mtr reading, stamp, sign 50-Hour Service 1. Perform the 25-hour service. 2. Clean/replace the air cleaner ’s lter cartridge (paper lter) (shorter intervals for dusty operating conditions). 3. Change engine oil.
SER VICE JOURNAL English - 69 Action Date, mtr reading, stamp, sign 100-Hour Service 1. Perform the 25-hour service. 2. Perform the 50-hour service. 3. Change the engine oil lter . 4. Clean/replace the spark plugs. 5. Replace the fuel lter . 6. Clean the cooling ns on the engine and transmission.
SER VICE JOURNAL English - 70 Action Date, mtr reading, stamp, sign 300-Hour Service 1. Inspect the machine. Come to agreement with the customer as to which additional work is to be carried out. 2. Perform the 25-hour service. 3. Perform the 50-hour service.
SER VICE JOURNAL English - 71 Action Date, mtr reading, stamp, sign At Least Once Each Y ear 1. Clean the engine’s cooling air intake (25 hours). 2. Replace the air cleaner ’s pre-lter (foam) (300 hours). 3. Replace the air lter ’s paper cartridge.
SER VICE JOURNAL English - 72 Action Date, mtr reading, stamp, sign.
SER VICE JOURNAL English - 73 Action Date, mtr reading, stamp, sign.
SER VICE JOURNAL English - 74 Action Date, mtr reading, stamp, sign.
.
P/N 1 151 16927 04/01/08.
An important point after buying a device Husqvarna LZF6127 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna LZF6127 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna LZF6127 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna LZF6127 you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna LZF6127 will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna LZF6127, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna LZF6127.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna LZF6127. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna LZF6127 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
