Instruction/ maintenance manual of the product LTH135 Husqvarna
Go to page of 45
02478 L TH135 Owner's Manual 01960_husqvarna.
2 Safe Operation Practices f or Ride-On Mower s IMPORT ANT : THIS CUTTING MA CHINE IS CAP ABLE OF AMPUT A TING HANDS AND FEET AND THRO W ING OBJECTS. F AILURE T O OBSER VE THE FOLLO WING SAFETY INSTRUCTIONS COULD RESUL T IN SERIOUS INJUR Y OR DEA TH. SAFETY R ULES I.
3 Safe Operation Practices f or Ride-On Mower s SAFETY R ULES • Be sure the area is clear of other people before mow- ing. Stop machine if any one enters the area. • Ne ver carry passengers or children ev en with the blades off . • Do not mow in re verse unless absolutely necessary .
4 PR ODUCT SPECIFICA TIONS GASOLINE CAP A CITY 1.25 GALLONS AND TYPE: UNLEADED REGULAR OIL TYPE (API-SF-SJ): SAE 30 (above 32°F) SAE 5W -30 (below 32°F) OIL CAP A CITY : W/Filter : 3.5 Pints W/O Filter : 3.0 Pints SP ARK PLUG: CHAMPION RC12YC (GAP: .
5 UNASSEMBLED P AR TS Steering Wheel Steering Wheel Insert (1) Large Flat Washer Steering Boot Steering Extension Shaft Steering Wheel Adapter Seat (2) Keys Slope Sheet Key (1) Oil Drain Tube For Futu.
6 ASSEMBL Y Y our new tractor has been assemb led at the factory with exception of those parts left unassembled f or shipping pur poses. T o ensure safe and proper oper ation of your tractor all parts and hardware you assemb le must be tightened securely .
7 FIG. 2 ASSEMBL Y FIG. 3 NO TE: Y ou ma y now roll or drive y our tractor off the skid. F ollow the ap pro pri ate instruction below to remov e the tractor from the skid .
8 ASSEMBL Y ✓ CHE CKLIST BEFORE Y OU OPERA TE AND ENJO Y Y OUR NEW TRAC- T OR, WE WISH T O ASSURE THA T Y OU RECEIVE THE BEST PERFORMANCE AND SA TISF ACTION FR OM THIS QU ALITY PRODUCT . PLEASE REVIEW THE FOLLOWING CHECKLIST : ✓ All assembly instructions hav e been completed.
9 OPERA TION These symbols ma y appear on your tractor or in liter ature supplied with the product. Lear n and understand their meaning. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models o.
10 OPERA TION KNO W Y OUR TRA CT OR READ THIS O WNER'S MANU AL AND SAFETY RULES BEFORE OPERA TING Y OUR TRACT OR Compare the illustrations with y our tractor to f amiliarize yourself with the locations of v arious controls and ad just ments. Sav e this manual for future ref erence.
11 OPERA TION The operation of any tractor can result in f oreign objects thrown into the ey es, which can result in severe e ye dam age. Alwa ys wear safety glass es or ey e shields while operating your tractor or per form ing any adjustments or repairs.
12 OPERA TION T O OPERA TE ON HILLS W ARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across an y slope. • Choose the slowest speed bef ore star ting up or down hills. • A void stopping or changing speed on hills.
13 OPERA TION PURGE TRANSMISSION CA UTION: Ne ver engage or disengage freewheel le ver while the engine is run- ning. T o ensure proper operation and perf or mance, it is rec om - mend ed that the transmission be purged bef ore operating tractor f o r the fi rst time.
14 FIG. 8 MO WING TIPS • Mower should be properly lev eled for best mo wing per- f or mance. See “T O LEVEL MOWER HOUSING” in the Ser vice and Adjustments section of this manual. • The left hand side of mower should be used f or tr im- ming. • Drive so that clippings are discharged onto the area that has been cut.
15 MAINTENANCE BEFORE EACH USE T R A C T 0 R Inspect Muffler/Spark Arrester Lubrication Chart Check Brake Operation Clean Air Filter Change Engine Oil (with oil filter) Replace Air Filter Paper Cartri.
16 MAINTENANCE BLADE REMO V AL (See Fig. 9) • Raise mower to highest position to allo w access to blades . • Remove b lade bolt, lock w asher and fl at w asher se cur ing bla de. • Install new or reshar pened blade with tr ailing edge up tow ards deck as sho wn.
17 MAINTENANCE V- B E LT S Check V -belts for deterioration and wear after 100 hours of operation and replace if necessary . The belts are not ad just able . Re place belts if they begin to slip from wear . TRANSAXLE COOLING The transmission f an and cooling fi ns should be k ept clean to assure proper cooling.
18 AIR FIL TER (See Fig. 14) Y our engine will not r un properly using a dir ty air fi lter . Replace pre-cleaner after e very 25 hours of operation or e very season. Ser vice paper car tr idge e very 100 hours of operation or e ver y season, whiche ver occurs fi rst.
19 SER VICE AND ADJUSTMENTS W ARNING: T O A V OID SERIOUS INJUR Y , BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress clutc h/brake pedal fully and set parking brake. • Place motion control le ver in neutral (N) position. • Place attachment c lutch in “DISENGA GED” position.
20 SER VICE AND ADJUSTMENTS NUT "E" "D" "D" MANDREL FIG. 19 NUT "F" FRONT LINKS FIG. 20 BO TH FRONT LINKS MUST BE EQ U AL IN LENGTH FIG.
21 FIG. 21 SER VICE AND ADJUSTMENTS 3 8 4 2 IDLER PUL LEYS MANDREL PULLEY MANDREL PULLEY T O CHECK AND ADJUST BRAKE (See Fig. 22) Y our tractor is equipped with an ad just able brak e system which is mounted on the right side of the transaxle.
22 SER VICE AND ADJUSTMENTS TRANSAXLE MO TION CONTROL LE VER NEUTRAL ADJUSTMENT(See Fig. 24) The motion control le ver has been pre set at the f actor y and adjustment should not be necessar y . • Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.
23 SER VICE AND ADJUSTMENTS 01536 HOOD T O REMO VE HOOD AND GRILL ASSEMBL Y (See Fig. 29) • Raise hood. • Unsnap headlight wire connector . FIG. 29 HEADLIGHT WIRE CONNECT OR T O REPLA CE HEADLIGHT BULB • Raise hood. • Pull bulb holder out of the hole in the backside of the grill.
24 ST ORA GE ENGINE FUEL SYSTEM IMPORT ANT : IT IS IMPORT ANT T O PREVENT GUM DEPOSITS FROM FORMING IN ES SEN TIAL FUEL SYSTEM P ARTS SUCH AS CARBURET OR, FUEL FIL TER, FUEL HOSE, OR T ANK DURING ST ORA GE.
25 Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly . 2. See “TO ST ART ENGINE” in Operation section. 3. Engine fl ooded. 3. Wait se ver al minutes before attempting to start. 4. Bad spark plug. 4. Replace spar k plug.
26 PROBLEM CA USE CORRECTION Engine continues to run 1. F aulty operator-safety presence control system. 1. Check wiring, switches and connections. If not when operator leaves corrected, contact an author ized service center/ seat with attachment depar tment.
27 TRA CT OR - MODEL NO . L TH135 (HA U135H36B) SCHEMA TIC BATTERY FUSE IGNITION SWITCH RED RED RED BLACK IGNITION UNIT HEADLIGHTS REMOVABLE CONNECTIONS BLACK BLACK BLACK WHITE WHITE WHITE RED BLACK O.
28 REP AIR P ARTS TRA CT OR - MODEL NO . L TH135 (HA U135H36B) ELECTRICAL 28 29 26 24 42 43 27 27 25 41 27 27 40 33 90 30 8 2 1 27 52 16 16 48 22 21.
29 REP AIR P ARTS TRA CT OR - MODEL NO . L TH135 (HA U135H36B) ELECTRICAL KEY P ART NO . NO. DESCRIPTION 1 532 16 34-65 Batter y 2 874 76 04-12 Bolt Hex Hd 1/4-20unc X 3/4 8 532 17 66-89 Box Battery 1.
30 REP AIR P ARTS TRA CT OR - MODEL NO . L TH135 (HA U135H36B) CHASSIS AND ENCLOSURES 64 74 10 30 51 57 53 52 54 55 17 29 28 12 209 31 1 2 9 208 209 209 5 5 207 144 26 26 60 26 144 26 10 142 208 13 208 11 143 60 209 142 145 37 37 18 206 14 14 38 212 chassis-pl.
31 REP AIR P ARTS TRA CT OR - MODEL NO . L TH135 (HA U135H36B) CHASSIS AND ENCLOSURES 1 532 17 46-19 Chassis Stamping 2 532 17 65-54 Drawbar , 12 Ga. 5 532 15 52-72 Bumper Hood/Dash 9 532 17 18-53 Das.
32 REP AIR P ARTS TRA CT OR - MODEL NO . L TH135 (HA U135H36B) DRIVE 66 29 28 32 30 52 32 59 38 61 41 53 35 55 36 62 35 36 22 39 34 16 1 77 77 30 52 56 64 65 212 63 116 70 57 96 26 25 19 24 26 26 76 7.
33 REP AIR P ARTS TRA CT OR - MODEL NO . L TH135 (HA U135H36B) DRIVE KEY P ART NO . NO . DESCRIPTION KEY P ART NO . NO . DESCRIPTION NO TE: All component dimensions giv e in U.S . inches. 1 inch = 25.4 mm. 1 - - - - - - - - T ransaxle Hydro Gr Model 322- 0510 (Order par ts from transaxle mfg.
34 REP AIR P ARTS TRA CT OR - MODEL NO . L TH135 (HA U135H36B) STEERING ASSEMBL Y 44 51 54 5 9 5 7 7 9 4 3 32 43 6 43 8 10 40 11 8 6 9 46 46 8 6 9 2 47 47 26 30 28 1 41 42 37 36 37 38 12 39 68 67 67 67 13 65 85 85 68 15 15 15 29 29 82 88 71 17 29 43 91 steering_pl.
35 REP AIR P ARTS TRA CT OR - MODEL NO . L TH135 (HA U135H36B) STEERING ASSEMBL Y KEY P ART NO . NO. DESCRIPTION 1 532 16 66-27 Wheel Steering 2 532 17 51-31 Axle Asm 3 532 16 98-40 Spindle Asm LH 4 5.
36 KEY P ART NO . NO. DESCRIPTION KEY P ART NO . NO. DESCRIPTION 1 532 14 08-39 Seat 2 532 14 05-51 Brack et Pivot Seat 8 720 3 871 11 06-16 Bolt Fin Hex 3/8-16unc X 1 4 819 13 16-10 W asher 13/32 X 1 X 10 Ga 5 532 14 50-06 Clip Push-In 6 873 80 06-00 Nut Hex w/Ins .
37 REP AIR P ARTS TRA CT OR - MODEL NO . L TH135 (HA U135H36B) DECALS 10 4 3 9 KEY P ART NO . NO. DESCRIPTION KEY P ART NO . NO. DESCRIPTION 1 532 05 91-92 Cap V alve Tire 2 532 06 51-39 Stem V alve 3.
38 1 532 17 05-51 Control Th/ch Flag 2 817 72 04-08 Screw He x Thd Cut 1/4-20 x 1/2 3 - - - - - - - - Engine, B&S 31H777 (Order par ts from engine manufac- turer) 4 532 13 73-52 Muffl er 13 532 1.
39 1 532 15 94-60 Wire Asm Inner W/plunger L T 2 532 15 94-71 Shaft Asm Lift 3 532 10 57-67 Pin Groove 4 812 00 00-02 E Ring #5133-62 5 819 21 16-21 W asher PL TD 21/32 X 1 X 21ga 6 532 12 01-83 Bear .
40 REP AIR P ARTS TRA CT OR - MODEL NO . L TH135 (HA U135H36B) MO WER DECK 13 11 10 9 8 53 34 146 148 172 171 21 21 21 113 123 30 30 30 33 32 1 7 7 4 122 15 31 168 169 2 2 21 21 2 16 27 26 25 24 23 28.
41 REP AIR P ARTS TRA CT OR - MODEL NO . L TH135 (HA U135H36B) MO WER DECK KEY P ART NO . NO. DESCRIPTION KEY P ART NO . NO. DESCRIPTION NO TE: All component dimensions giv en in U .
42 15 DEGREES MAX. FO LD A LO N G D O TTED LIN E TH IS IS A 15 D EG R EE SLO PE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face.
43 S EC TI ON 1: LIMITED W A R R A NTY Husqvarna Forest & Garden Compan y (“Husqvarna”) warr ants Husqv arna product to the or iginal pur- chaser to be free fro m defects in material and w ork.
532 18 82-41 5.29.03 MH Printed in U.S .A. 01960_husqvarna.
We hope you find the links below useful. For further ga rdening information visit www.GardenResources.c o.uk Blower Vacs Brush cutters Brushcutters Chainsaws Chain saws Cultivators Cylinder lawn mower.
An important point after buying a device Husqvarna LTH135 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna LTH135 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna LTH135 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna LTH135 you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna LTH135 will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna LTH135, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna LTH135.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna LTH135. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna LTH135 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
