Instruction/ maintenance manual of the product LOGTH2448T Husqvarna
Go to page of 32
03002 LOGTH2448T Operator's Manual.
2 SAFETY R ULES I. GENERAL OPERA TION • Read, understand, and f ollow all instructions on the machine and in the manual bef ore star ting. • Do not put hands or f eet near rotating par ts or under the machine. K eep clear of the discharge opening at all times.
3 SAFETY R ULES II. SLOPE OPERA TION Slopes are a major f actor related to loss of control and tip-ov er accidents , which can result in se v ere injur y or death. Opera- tion on all slopes requires e xtra caution. If you cannot bac k up the slope or if y ou f eel uneasy on it, do not mow it.
4 SAFETY R ULES • Remov e gas-po wered equipment from the truck or trailer and refuel it on the ground. If this is not possib le, then refuel such equipment with a por table container , rather than from a gasoline dispenser nozzle.
5 PR ODUCT SPECIFICA TIONS Gasoline Capacity 4 Gallons and T ype: Unleaded Regular Oil T ype SAE 30 (abov e 32°F) (API-SG-SL): SAE 5W30 (below 32°F) Oil Capacity: W/ Filter : 4.0 Pints W/O Filter : 3.75 Pints Spark Plug: Champion QC12YC (Gap: .030") Ground Speed F orward: 0-5.
6 Keys (2) Keys Slope Sheet (1) Oil Drain Tube For Future Use UNASSEMBLED P AR TS Y our new tr actor has been assembled at the f actor y with the exception of those par ts left unassembled f or shipping pur poses.
7 CHECK TIRE PRESSURE The tires on your tr actor were o verinfl ated at the f actor y f or shipping pur poses. Cor- rect tire pressure is impor tant for best cutting perf or mance. • Reduce tire pressure to PSI sho wn on tires. CHECK DECK LEVELNESS F or best cutting results, mo wer hous- ing should be properly lev eled.
8 OPERA TION These symbols ma y appear on your tr actor or in literature supplied with the product. Lear n and understand their meaning. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models o.
9 KNO W Y OUR TRA CT OR READ THIS O WNER'S MANU AL AND SAFETY RULES BEFORE OPERA TING Y OUR TRA CT OR Compare the illustrations with y our tractor to f amiliarize y ourself with the locations of v arious controls and ad just ments. Sav e this manual f or future ref erence.
10 The operation of an y tractor can result in f oreign objects thrown into the ey es , which can result in se vere e y e dam age. Alwa ys wear saf ety glass es or ey e shields while operating y our tractor or per fo r m ing any ad just ments or repairs.
11 T O ADJUST GA UGE WHEELS Gauge wheels are prop er ly ad just ed when they are slight ly off the ground when mow er is at the desired cutting height in operating position. Gauge wheels then keep the dec k in proper position to help pre v ent scalping in most terrain conditions.
12 0 2 8 2 8 ROS "ON" P osition Engine "ON" P osition (Nor mal Operating) S REVERSE OPERA TION SYSTEM (ROS) Y our tractor is equipped with a Re v erse Operation System (R OS).
13 T O WING CARTS AND O THER A T T A CH - MENTS T ow only the attachments that are rec om - mend ed by and comply with spec i fi ca tions of the manuf acturer of y our tractor . Use common sense when tow ing. T oo heavy of a load, while on a slope, is dangerous .
14 T O ST ART ENGINE When star ting the engine for the fi rst time or if the engine has run out of fuel, it will take e xtra cranking time to mov e fuel from the tank to the engine. 1. Be sure freewheel control is in the trans mis sion en gaged position.
15 MO WING TIPS • Tire chains cannot be used when the mow er hous ing is attached to trac tor . • Mo wer should be properly le veled f or best mowing perf or mance. See “T O LEVEL MO WER HOUSING” in the Ser vice and Adjustments section of this manual.
16 02956 MAINTENANCE T R A C T 0 R Inspect Muffler/Spark Arrester Clean Air Filter Change Engine Oil (with oil filter) Replace Air Filter Paper Cartridge Replace Spark Plug Check Engine Oil Level Clean Engine Cooling Fins Clean Air Screen 1 - Change more often when operating under a heavy load or in high ambient temperatures.
17 Blade Blade Bolt (Special) Center Hole Star Mandrel Assembly BLADE REMO V AL 1. Raise mow er to highest position to al- low access to b lades. NO TE: Protect y our hands with glov es and/or wrap b lade with heavy cloth. 2. Remov e b lade bolt by turning coun ter - clock wise .
18 V -BEL TS Check V -belts f or deter ioration and w ear after 100 hours of operation and replace if necessar y . The belts are not ad just able . Re place belts if they begin to slip from wear . TRANSAXLE COOLING The transmission f an and cooling fi ns should be kept clean to assure proper cooling.
19 ENGINE OIL FIL TER Replace the engine oil fi lter e v er y sea son or e v er y other oil change if the tractor is used more than 100 hours in one year . MUFFLER Inspect and replace corroded muffl er and spark arrester (if equipped) as it could cre- ate a fi re hazard and/or dam age.
20 SER VICE AND ADJUSTMENTS W ARNING: T O A V OID SERIOUS INJUR Y , BEFORE PERFORMING ANY SER- VICE OR ADJUSTMENTS: 1. Depress brak e pedal fully and set parking brake . 2. Place attachment clutch in “DISENGA GED” position. 3. T ur n ignition ke y to “ST OP” and remo ve k e y .
21 NO TE: Be sure mo wer side suspension ar ms (A) are pointing f orward bef ore slid- ing mow er under tractor . 3. Slide mow er under tractor until it is centered under tractor .
22 T O LEVEL MO WER Make sure tires are properly infl ated to the PSI shown on tires . If tires are ov er or under infl ated, it ma y aff ect the appear- ance of your la wn and lead y ou to think the mow er is not adjusted properly . VISU AL SIDE-T O-SIDE ADJUSTMENT 1.
23 02966 A A 4. If adjustment is necessar y , see steps 2 and 3 in Visual Adjustment instr uctions abov e . 5. Recheck measurements , adjust if nec- essar y until both sides are equal. 02548 B B FRONT -T O-BA CK ADJUSTMENT IMPORT ANT : Dec k must be le v el side- to-side.
24 .012" Brak e Plate Slot (3) Nylon Lockn ut (3) Clutch Plate Rotor T O ADJUST A TT A CHMENT CLUTCH The electric clutch should provide years of ser vice.
25 electric 02953 A B C D E F G H J T O ST ART ENGINE WITH A WEAK BA T - TER Y W ARNING: Lead-acid batter ies gen- er ate ex plo sive gases . K eep sparks, fl ame and smoking ma te ri als awa y from bat- ter ies. Alwa ys wear ey e pro tec tion when around batteries.
26 T O REMO VE HOOD AND GRILL AS- SEM BL Y 1. Raise hood. 2. Unsnap headlight wire connector . 3. Stand in front of tractor . Grasp hood at sides, tilt to ward engine and lift off of tractor . 4. When replacing hood, be sure to re- connect the headlight wire con nec tor .
27 ST ORA GE Immediately prepare your tr actor f or stor- age at the end of the season or if the trac- tor will not be used f or 30 da ys or more. W ARNING: Ne v er store the trac tor with gas o line in the tank inside a building where fumes ma y reach an open fl ame or spark.
28 Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” 2. See “T O ST ART ENGINE” in properly . Operation section. 3. Engine fl ooded. 3. W ait sev eral min utes bef ore attempting to star t. 4. Bad spar k plug. 4. Replace spark plug.
29 Loss of power 6. F aulty spark plug. 6. Clean and regap or change (continued) spark plug. 7. Dir ty fuel fi lter . 7. Replace fuel fi lter . 8. Stale or dir ty fuel. 8. Empty fuel tank and refi ll tank with fresh, clean gas o line. 9. W ater in fuel.
30 Mower b lades will 1. Obstr uction in clutch 1. Remov e obstruction. not rotate mechanism. 2. Worn/damaged mower driv e 2. Replace mower driv e belt. belt. 3. F rozen idler pulle y . 3. Replace idler pulley . 4. F rozen b lade mandrel. 4. Contact a qualifi ed service center .
31 W ARRANTY SECTION 1: LIMITED W ARRANTY Husqvarna F orest & Garden Company (“Husqv ar na”) warrants Husqv arna product to the or iginal purchaser to be free from def ects in material and wor.
532 40 26-59 Rev. 1 01.10.06 TR Printed in USA 15 DEGREES MAX. FOLD ALONG DOTTED LINE THIS IS A 15 DEGREE SLOPE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face.
An important point after buying a device Husqvarna LOGTH2448T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna LOGTH2448T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna LOGTH2448T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna LOGTH2448T you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna LOGTH2448T will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna LOGTH2448T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna LOGTH2448T.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna LOGTH2448T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna LOGTH2448T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
