Instruction/ maintenance manual of the product FS 800 E Husqvarna
Go to page of 15
HUSQV ARNA CONSTRUCTION PRO DUCTS Opera tor’s ma nu al FS 8 00 E FS 8 00 EM Please read the Operator’ s manual carefully and mak e sure you understand the instructions bef or e using the machine.
2 Compliance with EU directives Husqvarna Construction Products Sweden AB , Box 2098, SE-550 02 Jönköping, Sweden, tel: +46 (0)36-570 60 00, hereby certifies that its FS 800 E/EM floor sa w , having.
3 Contents _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ General instructions.
4 The FS800 E /EM f loor s aw is a professional machi ne designed for cutting r einforced concrete, asphalt and stone. This machine may only be used by those who have carefully read this instruction manual and follow its instructions. If you are unsure about any point please consult the supplier before starting to use the machine.
5 2. Safety precautions Y ou must follow the safety precautions before starting the machine. If the user does not follow these precautions then neither Husqvarna Construction Products Sweden AB nor its re- presentative can accept any liabili t y , whether direct or indirect.
6 • Check that the water-cooling coupling matches the speci- fications. See section 9 T echnical specifications. • Set up a barrier or signs around the working ar ea to prevent any unauthorised personnel from being injured or disturbing the operator while working.
7 • Check your safety equipment and any protective clothing you are wearing. • Apply the parking brake. • If the machine is fitted with a base plate (optional acces- sory). Lower the base plate by raising the safety catch. • T urn on the cooling water to provide adequate cooling and prevent dust formation.
8 Figure 5.2 5.2.1. Water pipe for cooling blade 5.2.2. Belt tension adjuster screw . 5.2.3. Belt guard Figure 5.3 Figure 5.4 5.4.1-2 Grease points for height adjustment screw 6.
9 Figure 6.2 7. Lifting and transporting the floor saw The FS800 E /EM floor saw is fitted with a parking brake, see figures 7.2 and 7.3, which must be applied when the saw is not in use and when it is being transpo r ted. The floor saw also has a lifting eye, figure 7.
9. T echnical specifications The table below gives the technical specifications for the FS800 E/EM floor sa w . It is extremely important that you check these before: - Choosing a floor saw . - Choosing and fitting a diamond blade. - Connecting to the mains supply .
11 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
12 Posn. no. Part no. Quantity Description Posn. no. Part no. Quantity Description 83 531072183 1 Relay FS800 E 84 531072169 1 T wo-position switch 85 531072185 1 Emergency stop FS800 E 86 531072178 1.
13.
14 * * * * * * * * * * * * * * * * * * * * * * * * * * Only for FS 800 EM *.
w w w .husqvarnacp.com 5040594-02 200 7 - 06 -0 7.
An important point after buying a device Husqvarna FS 800 E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna FS 800 E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna FS 800 E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna FS 800 E you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna FS 800 E will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna FS 800 E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna FS 800 E.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna FS 800 E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna FS 800 E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center