Instruction/ maintenance manual of the product BCZ3200DW Husqvarna
Go to page of 18
GB-1 G B BCZ3200DL / BCZ3200DW BCZ3200DL BCZ3200D W G B OWNER’S MANUAL BRUSHCUTTERS.
GB-2 BCZ3200DL / BCZ3200DW EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS W ARNING!!! RISK OF D AMA GING HEARING IN NORMAL CONDITIONS OF USE, THIS MACHINE MA Y INVOL VE A DAIL Y LEVEL OF PERSONAL EXPOSURE TO NOISE FOR THE OPERA TOR EQUAL TO OR GREA TER THAN 85 dB(A) 29.
GB-3 G B BCZ3200DL / BCZ3200DW SAFETY FIRST Instructions contained in warnings within this manual mar ked with a symbol concern cr itical points which must be taken into consideration to pre vent possible serious bodily injury , and f or this reason y ou are requested to read all such instructions carefully and follo w them without fail.
GB-4 BCZ3200DL / BCZ3200DW 2. Specification BCZ3200DL / BCZ3200D W Overall size (L W H) ............................. 1860 x 395 x 325 / 1860 x 610 x 520 mm Dry weight ...........................................................................
GB-5 G B BCZ3200DL / BCZ3200DW 5. For safe operation 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2. Keep this manual handy so that you may refer to it later when- ever any questions arise.
GB-6 BCZ3200DL / BCZ3200DW ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. W ARNING Never place the thr ottle into the high-speed position when starting the engine.
GB-7 G B BCZ3200DL / BCZ3200DW could result in serious burns or elec- trical shock. • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W arn adults to keep pets and children away fr om the area. Be car eful if you ar e ap- proached.
GB-8 BCZ3200DL / BCZ3200DW INST ALLING HANDLE (BCZ3200DL) • Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. INST ALLING HANDLE (BCZ3200DW) 1. Loosen the 4bolts on the upper cap and insert the handles equally .
GB-9 G B BCZ3200DL / BCZ3200DW ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 • Exhaust emission are controlled b y the funda- mental engine parameters and components (eq., carburation, ignition timing and por t timing) with- out addition of an y major hard ware or the introduc- tion of an inert material during combustion.
GB-10 BCZ3200DL / BCZ3200DW ST ARTING ENGINE W ARNING The cutting head will start rotating upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surrounding objects, as it will start rotating upon starting of the engine.
GB-11 G B BCZ3200DL / BCZ3200DW ADJUSTING THROTTLE CABLE • The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as requir ed. (1) (1) Cable adjuster ADJUSTING IDLING SPEED (1) Idle adjusting screw 1.
GB-12 BCZ3200DL / BCZ3200DW W ARNING CONTROLLING BLADE BOUNCE •K ick out can cause serious personal injur y . Carefully study this section. It is important that you understand what causes kick out, how you can reduce the chance of kick out and how you can remain in contr ol of the unit if kick out does occur .
GB-13 G B BCZ3200DL / BCZ3200DW 8. Operation 3. Use a slow , deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will r equire slower action than will light growth. 4. Never swing the unit so hard as you ar e in danger of losing your balance or control of the unit.
GB-14 BCZ3200DL / BCZ3200DW W ARNING • Make sure that the engine has stopped and is cool before perf orming any service to the machine. Con- tact with moving cutting head or hot m uffler may result in a personal injury . AIR FIL TER • The air filter , if clogged, will reduce the engine perfor - mance.
GB-15 G B BCZ3200DL / BCZ3200DW IMPORT ANT • Note that using any spark plug other than those des- ignated ma y result in the engine failing to operate prop- erly or in the engine becoming overheated and dam- aged.
GB-16 BCZ3200DL / BCZ3200DW 11. T r oubleshooting guide Case 1. Starting failure CHECK PROB ABLE CAUSES A CTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filt.
Gardening Tools Direct - Leaders in Garden Machinery Blower Vacs Blower Vacs Brushcutters Brush cutters Chainsaws Chain saws Chain saws Cultivators Cylinder Lawn Mowers Cylinder Mowers Fertiliser Echo.
Three Great Lawn Mowers Three Great Lawn Mowers Discounted Lawn Mowers Brush Cutter Selection Atco Lawn Mowers Kawasaki Brushcutters Kawasaki Brushcutters Discounted Brushcutters Grit Spreaders Salt S.
An important point after buying a device Husqvarna BCZ3200DW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna BCZ3200DW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna BCZ3200DW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna BCZ3200DW you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna BCZ3200DW will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna BCZ3200DW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna BCZ3200DW.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna BCZ3200DW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna BCZ3200DW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
