Instruction/ maintenance manual of the product 917.29939 Husqvarna
Go to page of 32
® I m Owner's Manual 532 43 58-47.
SAFETY RULES Safe Operation Practices for Walk=Behind Powered Rotary Tillers TRAiNiNG • Read the Owner's Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.
PRODUCT SPECIFICATIONS Gasoline Capacity: 3 Quarts (2.8L) Unleaded Regular Oil (API-SG-SL): SAE 30 (Above 32°F/0°0) (Capacity: 21 oz./0.6L) SAE 5w-30 (Below 32°F/0°0) Spark Plug : Champion (Gap: .030"/0.76mm) RC12YC CONGRATULATIONS on your purchase of a new tiller.
ASSEMBLY Your new tiller has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tiller all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.
ASSEMBLY UNPACK CARTON & iNSTALL HANDLE See Fig. 2) CAUTION: Be careful of exposed staples when handling or disposing of carton= ing material. IMPORTANT:WHEN UNPACKING AND ASSEMBLING TILLER, BE CAREFUL NOT TO STRETCH OR KINK CABLE(S). Cut cable ties securing handle column.
OPERATION KNOW YOUR TILLER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER. Compare the illustrations with your tiller to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
OPERATION The operation of any tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your til- ler and while tilling. We recommend a wide vision safety mask over spectacles or standard safety glasses.
OPERATION TO TRANSPORT CAUTION: Before lifting or transporting, aJiow tiller engine and muffler to cool. Disconnect spark plug wire. Drain gasoline from fuel tank. AROUND THE YARD • Tip depth stake forward until it is held by the stake spring. Push tiller handles down, raising tines off the ground.
OPERATION NOTE: If engine does not start, see troubleshooting points. SPARK PLUG CHOKE CONTROL RECOIL STARTER CONTROL Fig. 8 BREAKING IN YOUR TILLER Break-in your belt(s), pulleys and tine control before you actually begin tilling. • Start engine, tip tines off ground by pressing handles down and engage tine control to start tine rotation.
MAINTENANCE MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE Check Engine Oil Level v' v' SERVICE DATES Change Engine Oil !_1,2 Oil Pivot Points V' Inspect Spark Arres.
MAINTENANCE Disconnect spark plug wire before performing any maintenance (except carburetor adjustment) to prevent accidental starting of engine. Prevent fires! Keep the engine free of grass, leaves, spilled oil, or fuel. Remove fuel from tank before tipping unit for maintenance.
MAINTENANCE COOLING SYSTEM (See Fig. 14) Your engine is air cooled. For proper engine performance and long life keep your engine clean. • Clean air screen frequently using a stiff-bristled brush. • Remove blower housing and clean as necessary. • Keep cylinder fins free of dirt and chaff.
SERVICE AND ADJUSTMENTS CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into contact with plug. TILLER TO ADJUST HANDLE HEIGHT (See Fig. 15) Factory assembly has provided lowest handle height. Select handle height best suited for your tilling conditions.
SERVICE AND ADJUSTMENTS TO REMOVE BELT GUARD (See Fig. 19) • Remove two (2) cap nuts and washers from side of belt guard. • Loosen (do not remove) tine shield nut on underside of tine shield. e e Pull belt guard out and away from unit. Replace belt guard by reversing above procedure.
SERVICE AND ADJUSTMENTS CHECK TINE OPERATION • See "TINE OPERATION CHECK" in this section of manual. REPLACE BELT GUARD FORWARD MOTION (iNSiDE) V-BELT ENGINE PULLEY TRANSMISSION PULLEY / I.
STORAGE Immediately prepare your tiller for storage at the end of the season or if the unit will not be used for 30 days or more. WARNING: Never store the tiller with gasoline in the tank inside a building where fumes may reach an open flame or spark.
TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Will not start Hard to start Loss of power Engine overheats Excessive bounce/ difficult handling Soil bails up or clumps Engine runs but tiller won't move Engine runs but labors when tilling 1. Out of fuel.
REPAIR PARTS HANDLES TILLER - - MODEL NUMBER 917.299390 35 38 3 3 35 50 / / / / / / / 29 19 20 KEY NO. 1 3 12 13 14 19 2O 22 29 PART NO. 532 43 532 16 898 00 872 01 532 18 532 18 532 18 532 18 812 00 .
REPAIR PARTS TILLER - - MODEL NUMBER 917.299390 BELT GUARD AND PULLEY ASSEMBLY KEY PART NO. NO. 1 532 18 03-77 2 532 00 94-84 3 532 08 67-77 4 874 61 08-12 5 873 68 06-00 6 819 13 13-16 7 532 12 50-04.
REPAIR PARTS TILLER - - MODEL NUMBER 917.299390 WHEEL AND DEPTH STAKE ASSEMBLY 16 25 KEY PART NO. NO. 1 532 O0 91-94 2 874 76 05-20 3 874 76 05-12 4 873 22 05-00 5 810 04 05-00 6 873 80 06-00 7 532 12 49-61 8 532 O0 19-52 9 532 12 22-33 10 532 O0 03-26 11 874 78 06-28 13 532 O0 19-51 KEY PART DESCRIPTION NO.
REPAIR PARTS TINE ASSEMBLY TILLER - - MODEL NUMBER 917.299390 6 2 5 / / / tine_ipb_3 KEY PART NO, NO, DESCRIPTION 1 532 15 69-34 Tine, Outer, R.H. 2 532 00 31-46 Retainer, Spring 3 532 15 69-32 Tine, Inner, R.H. KEY PART NO. NO. 4 532 15 69-31 5 532 15 69-33 6 532 00 49-29 DESCRIPTION Tine, Inner, L.
REPAIR PARTS TRANSMiSSiON TILLER - - MODEL NUMBER 917.299390 2i / 11 11 lO 14 10 KEY PART NO. NO. 1 874 76 05-24 2 874 78 06-52 3 819 13 13-11 5 873 90 06-00 8 532 43 27-11 7 532 18 81-95 8 532 16 58-34 10 873 97 05-00 11 532 18 79-12 12 532 15 12-22 12 DESCRiPTiON Bolt, Hex 5/16-18 x 1-1/2 Gr.
REPAIR PARTS DECALS TILLER - - MODEL NUMBER 917.299390 3 9 8 10 11 KEY PART NO. NO. 1 532 43 24-16 2 532 42 91-96 3 532 43 24-18 4 532 43 29-87 5 532 11 08-14 8 532 12 00-76 9 532 42 29-72 10 532 40 41-43 11 532 43 22-78 - - 532 43 58-47 - - 532 43 58-48 DESCRiPTiON Decal.
TILLER - - MODEL NUMBER 917.299390 BRIGGS ENGINE - MODEL NUMBER 121002, TYPE NUMBER 1380-B8 J 48 SHORT BLOCK ] 415 _ 12 22 742 _3 746 _ 21@ 15A _ 24 0 [_0_O_OR'SM_NU_L] [I_2_R_L_C_M_N_NG,N_] I I_0_RM_NU_L I 11 lS_ 1026 332 146 741 13 _¢:_ 46 365_ 951 190@_ _ 635 1029 ) 869 601 45 _k_j" 1026 .
TILLER - - MODEL NUMBER 917.299390 BRIGGS ENGINE - MODEL NUMBER 121002, TYPE NUMBER 1380-B8 1270 163 6921 130 ' ' %" _'" 95 _'_ q'£ "_186 51_i 1133 1 _._._ " _% 276 _'-" _/ 621 663 (_¢'% 281 190_ 188 562 _,_ J 677 _ 635 334 ''2_ 356 163 161 445 • ,,S_ • •_ .
TILLER - - MODEL NUMBER 917.299390 BRIGGS ENGINE - MODEL NUMBER 121002, TYPE NUMBER 1380-B8 358 ENGINE GASKET SET 20 163 51 883_ 1022 1022 104 _% 51 121 CARBURETOR OVERHAUL KIT 127 0 163 633 _) 137 27.
TILLER - - MODEL NUMBER 917.299390 BRIGGS ENGINE = MODEL NUMBER 121002, TYPE NUMBER 1380=B8 KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. 1 699510 Cylinder Assembly 161 790631 2 399269 Kit-Bushing/Sea.
TILLER - - MODEL NUMBER 917.299390 BRIGGS ENGINE - MODEL NUMBER 121002, TYPE NUMBER 1380-B8 KEY PART NO. NO. DESCRIPTION 741 695087 Gear-Timing 742 692564 Retainer-E Ring 746 790278 Gear-Idler 830 797.
SERVICE OTES 29.
SERVICE NOTES 3O.
SERVICE OTES 31.
o o3 I'o ob o © F Z {:: :3 ® -O cL ..._" (1) C b_ 2, Husqvams" WARRANTY STATEMENT SECTION 1: LIMITED WARRANTY Husqvarna Forest & Garden Company ("Husqvarna") warrants Hu.
An important point after buying a device Husqvarna 917.29939 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna 917.29939 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna 917.29939 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna 917.29939 you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna 917.29939 will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna 917.29939, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna 917.29939.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna 917.29939. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna 917.29939 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
