Instruction/ maintenance manual of the product 7021F Husqvarna
Go to page of 16
7021F Operator’s Manual / 96143004201 / 2009-11 532 43 18-98 1 1.20.09 BY Printed in U.S.A..
2 W ARNING: Battery posts, terminals and related ac ces so ries contain lead and lead compounds, chemicals known to the State of Cal i for nia to cause can cer and birth defects or oth er re pro duc tive harm.
3 SAFETY RULES ......................................................... 2-3 PRODUCT SPECIFICA TIONS ....................................... 3 CUSTOMER RESPONSIBILITIES................................. 3 ASSEMBL Y .....................................
4 FIG. 2 FRAME HANDLE VINYL BINDINGS FRAME OPENING ASSEMBL Y Read these instructions and this man u al in its entirety before you attempt to assemble or operate your new lawn mow er. IMPORT ANT : THIS LA WN MOWER IS SHIPPED WITH- OUT OIL OR GASOLINE IN THE ENGINE.
5 FUEL V AL VE LEVER KNOW YOUR LA WN MOWER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERA TING YOUR LA WN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments.
6 TO CONVERT MOWER Y our lawn mower was shipped ready to be used as a mulcher . T o convert to bagging or discharging: REAR BAGGING (See Fig. 5) • Lift rear door of the lawn mower and place the grass catcher frame hooks onto the door pivot pins. • T o convert to mulching or dis charg ing operation, remove grass catch er and close rear door.
7 PIVOT PINS REAR DOOR GRASS CA TCHER HANDLE CA TCH ER FRAME HOOK FIG. 5 OPERA TION SIDE DISCHARGING (See Fig. 6) • Rear door must be closed. • Open mulcher door and install dis charge defl ector under door as shown. • Mower is now ready for discharging operation.
8 OPERA TION MOWING TIPS CAUTION: Do not use de-thatcher blade attachments on your mower . Such at- tachments are hazardous, will damage your mower and could void your warranty .
9 OPERA TION • A void cutting your lawn when it is wet. Wet grass tends to form clumps and interferes with the mulching action. The best time to mow your lawn is the early afternoon. At this time the grass has dried, yet the newly cut area will not be exposed to direct sunlight.
10 ➁ ENGINE OIL ➀ HANDLE BRACK ET MOUNT ING PINS ➀ REAR DOOR HINGE ➀ MULCHER DOOR HINGE PIN ➀ WHEEL ADJUSTER (ON EACH WHEEL) LUBRICA TION CHART ➀ SPRA Y LUBRICANT ➁ SEE “ENGINE” IN MAINTENANCE SECTION • At least once a year , replace the spark plug, clean or replace air fi lter element and check blade for wear .
11 MAINTENANCE TO REPLACE BLADE (See Fig. 1 1) 1. Position the blade adapter on the engine crank shaft. Be sure key in adapter and crankshaft key way are aligned. 2. Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter .
12 CAUTION: T o avoid serious injury , before performing any service or adjustments: 1. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.
13 ENGINE Maintenance, re pair , or re place ment of the emission con- trol de vic es and sys tems, which are be ing done at the cus tom ers expense, may be performed by any non-road engine repair es tab lish ment or individual. Warranty repairs must be performed by an authorized engine man u fac tur er's service outlet.
14 ST ORAGE ENGINE Maintenance, re pair , or re place ment of the emission con- trol de vic es and sys tems, which are be ing done at the cus tom ers expense, may be performed by any non-road engine repair es tab lish ment or individual. Warranty repairs must be performed by an authorized engine man u fac tur er's service outlet.
15 TROUBLESHOOTING POINTS Does not start 1. Dirty air fi lter . 1. Clean/replace air fi lter . 2. Out of fuel. 2. Fill fuel tank. 3. Stale fuel. 3. Empty fuel tank and refi ll tank with fresh, clean gas oline. 4. Water in fuel. 4. Empty fuel tank and r efi ll tank with fresh, clean gas oline.
16 SECTION 1: LIMITED W ARRANTY Husqvarna Forest & Garden Company (“Husqvarna”) warrants Husqvarna product to the original purchaser to be free from defects in material and workmanship from th.
An important point after buying a device Husqvarna 7021F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna 7021F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna 7021F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna 7021F you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna 7021F will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna 7021F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna 7021F.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna 7021F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna 7021F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
