Instruction/ maintenance manual of the product 1027STE Husqvarna
Go to page of 32
1027STE Owner's Manual.
2 Safe Operation Practices f or Snow Thro wers IMPORT ANT : This machine is capable of amputating hands and f eet and throwing objects. F ailure to obser v e the follo wing saf ety instructions could result in ser ious injur y or death. SAFETY R ULES W ARNING: This snow thr ower is f or use on sidewalks, driveways and other ground le vel surfaces.
3 PR ODUCT SPECIFICA TIONS Gasoline Capacity 4.0 Quar ts and T ype: Unleaded Regular only Oil T ype SAE 30 (abov e 40°F) (API-SF-SJ): SAE 5W -30 or 10W -30 (0° to +40°F) SAE 0W -30 (below 0°F) Oil Capacity: 26 Ounces Spark Plug: Champion RN4C (Gap: .
4 P AR TS P A CKED SEP ARA TEL Y IN CAR T ON MAINTENANCE ..................................................... 14-15 MAINTENANCE SCHEDULE ..................................... 14 SER VICE AND AD JUST MENTS ........................... 16-18 ST ORA GE .
5 ASSEMBL Y / PRE-OPERA TION Read these instructions and this man u al in its entirety before y ou attempt to assemble or oper ate your ne w snow throw er . Y our new sno w thrower has been as sem bled at the f actor y with the ex cep tion of those par ts left unassembled f or shipping pur poses.
6 ASSEMBL Y / PRE-OPERA TION INST ALL A UGER CONTROL R OD (See Figs. 5 and 6) The auger control rod has the shor t loop on the end of the spring as shown. 1. Slide rubber slee v e up rod and hook end of spring into control ar m with loop opening up as shown.
7 ASSEMBL Y / PRE-OPERA TION CHECK TIRE PRESSURE The tires on your sno w thrower w ere ov erinfl ated at the f ac- tor y f or shipping pur poses. Correct and equal tire pres sure is impor tant for best sno w throwing perf or mance. • Reduce tire pressure to 14-17 PSI.
8 OPERA TION KNO W Y OUR SNO W THR O WER READ THIS OWNER'S MANU AL AND ALL SAFETY RULES BEFORE OPERA TING Y OUR SNO W THRO WER. Compare the illustrations with y our snow throw er to familiarize y ourself with the location of various controls and adjustments.
9 OPERA TION Choke control - used f or star ting a cold engine. Drive speed control le ver - used to select f orward or re verse motion and speed of sno w thrower . T raction drive contr ol lever - used to engage po wer-pro- pelled for w ard or rev erse motion of snow thrower .
10 The operation of any sno w throw er can result in f oreign objects thrown into the e yes, which can result in se vere e ye damage . Alwa ys wear saf ety glasses or ey e shields while operating your sno w thrower or perf or ming any ad just - ments or repairs.
11 OPERA TION DRIVE SPEED CONTROL LEVER TRA CTION DRIVE CONTROL LEVER AU G E R CONTROL LEVER T O THRO W SNO W (See Fig. 14) The auger rotation is controlled by the auger control le ver located on the right side handle. • Squeeze auger control le v er to handle to engage the auger and throw sno w .
12 T O ADJUST SKID PLA TES (See Fig. 16) NO TE: The wrench provided in your parts bag may be used to adjust the skid plates. Skid plates are located on each side of the auger housing and adjust the clearance between the scr aper bar and the ground surf ace.
13 COLD ST ART - ELECTRIC ST ARTER 1. Inser t saf ety ignition ke y into the ignition slot until it clicks . DO NO T tur n the ke y . K eep the extra saf ety ignition ke y in a saf e place. 2. Place throttle control in F AST position. 3. Rotate choke control to FULL position.
14 MAINTENANCE LUBRICA TION CHART GENERAL REC OM MEN DA TIONS The warranty on this sno w throw er does not cov er items that hav e been sub ject ed to operator abuse or negligence. T o receive full v alue from the warranty , operator must maintain snow thro wer as in str uct ed in this manual.
15 MAINTENANCE V- B E LT S Check V -belts f or deter ioration and wear after e very 50 hours of operation and replace if necessary . The belts are not ad just able . Replace belts if they begin to slip from wear . (See “T O REMO VE BEL T COVER” in the Ser vice and Adjustments section of this manual).
16 A UGER SHAFT 1/4-20 x 2 SHOULDER / SHEAR BOL T 1/4-20 LOCK NUT IMPELLER SHAFT 1/4-20 x 1-5/8 CAPSCREW / SHEAR BOL T 1/4-20 LOCKNUT IMPELLER HUB AU G E R HUB A UGER HUB SER VICE AND ADJUSTMENTS W ARNING: T o av oid serious injur y , before perf orming any service or ad- just ments: 1.
17 SER VICE AND ADJUSTMENTS T O REPLA CE BEL TS (See Fig. 20) The auger and traction drive belts are not adjustab le. If the belts are damaged or begin to slip from wear , they should be replaced. It is recommended that the belt(s) be replaced by a qualifi ed service center .
18 ST ORA GE Immediately prepare your sno w thrower f or storage at the end of the season or if the unit will not be used for 30 da ys or more. W ARNING: Never store the sno w thro wer with gaso line .
19 Does not start 1. Fuel shut-off v alve (if so 1. T ur n fuel shut-off valv e to OPEN position. equipped) in OFF position. 2. Saf ety ignition ke y 2. Insert safety ignition k ey . is not inserted. 3. Out of fuel. 3. Refi ll fuel tank with fresh, clean gasoline .
20 REP AIR P ARTS A UGER HOUSING / IMPELLER ASSEMBL Y SNO W THRO WER - - MODEL NO . 1027STE (HL1027STEA), PR ODUCT NO . 954 63 35-45 22 18 21 2 19 6 6 5 6 6 9 12 7 7 8 6 11 27 27 30 26 25 24 23 20 31 .
21 KEY P ART NO . NO . DESCRIPTION 2 532 05 38-47 W asher , Flat 4 532 18 10-83 Pulley , Impeller 5 532 18 89-10 Bearing Assembly , Flange 6 532 15 53-77 Nut, Hex Flange 5/16-18 7 532 18 03-55 Bolt, F.
22 REP AIR P ARTS CONTR OL P ANEL / DISCHARGE CHUTE SNO W THRO WER - - MODEL NO . 1027STE (HL1027STEA), PR ODUCT NO . 954 63 35-45 1 2 6 7 4 5 6 8 8 19 2 2 30 26 28 27 27 25 20 29 24 18 13 14 3 11 12 .
23 KEY P ART NO . NO . DESCRIPTION 1 532 18 33-34 Knob , Lev er 2 817 50 10-10 Screw #10-24 x 5/8 3 532 18 41-14 Strap , Slotted 4 873 80 06-00 Nut, Lock 3/8-16 5 819 13 13-16 W asher , Flat 3/8 6 532.
24 REP AIR P ARTS HANDLES SNO W THRO WER - - MODEL NO . 1027STE (HL1027STEA), PR ODUCT NO . 954 63 35-45 5 11 12 15 7 10 33 18 19 37 34 35 20 20 21 21 6 11 5 36 13 2 5 15 11 4 4 3 3 16 17 16 23 22 38 .
25 KEY P ART NO . NO . DESCRIPTION 1 532 18 41-10 Lev er , Auger Control, RH 2 532 18 41-09 Lev er , T raction Drive Control, LH 3 532 17 94-39 Nut, Cage 1/4-20 4 532 17 88-88 Bushing, Flange 5 532 16.
26 REP AIR P ARTS DRIVE SNO W THRO WER - - MODEL NO . 1027STE (HL1027STEA), PR ODUCT NO . 954 63 35-45 35 33 15 41 22 34 29 22 31 26 7 2 43 2 11 3 3 25 24 23 12 32 27 44 20 21 21 22 16 1 17 15 2 1 4 1.
27 KEY P ART NO . NO . DESCRIPTION 1 532 14 63-15 Screw , He x Head 5/16-18 x 3/4 2 873 80 05-00 Nut, Lock 5/16-18 3 532 15 54-15 W asher , Flat 4 817 49 05-08 Screw , He x Head 5/16-18 x 1/2 5 532 18.
28 REP AIR P ARTS CHASSIS / ENGINE / PULLEYS SNO W THRO WER - - MODEL NO . 1027STE (HL1027STEA), PR ODUCT NO . 954 63 35-45 10 21 6 19 17 10 21 22 23 2 1 3 4 6 7 8 9 12 13 15 27 26 25 24 18 7 6 20 14 .
29 KEY P ART NO . NO . DESCRIPTION 1 532 18 10-44 Spring, T raction Idler 2 532 18 05-22 Pulley , Idler (2-1/4) 3 - - - Engine, T ecumseh, Model Number HMSK105 (Order par ts from Engine manuf acturer).
30 REP AIR P ARTS WHEELS / DECALS SNO W THRO WER - - MODEL NO . 1027STE (HL1027STEA), PR ODUCT NO . 954 63 35-45 3 2 4 4 5 5 6 6 4 4 1 2 5 3 1 4 2 11 0 7 6 8 9 10.
31 KEY P ART NO . NO . DESCRIPTION 1 532 18 78-33 Wheel Assembly , 16", LH 2 532 15 54-43 Pin, Klik 1/4 3 532 18 78-65 Wheel Assembly , 16", RH 4 532 14 63-15 Screw , He x Head 5/16-18 x 1/2 5 532 17 98-30 Bearing, Axle 6 532 17 46-97 W asher , Thrust, 1" NO TE: All component dimensions giv en in U .
532 18 78-26 Re v . 3 03.03.04 BY Printed in U.S .A. S E C T I ON 1: L I MIT E D W A R R A N T Y Husqvarna F orest & Garden Company (“Husqvarna”) warrants Husqv arna product to the original pu.
An important point after buying a device Husqvarna 1027STE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna 1027STE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna 1027STE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna 1027STE you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna 1027STE will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna 1027STE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna 1027STE.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna 1027STE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna 1027STE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
