Instruction/ maintenance manual of the product WHISPERWIND2000TM Hunter Fan
Go to page of 24
T ype X Y ear-Round Comfort For the Next Generation ® 41277-01 05/98.
2 41277-01 05/98 ® CONGRA TULA TIONS! Hunter is proud to pr esent the Whisperwind 2000™ – year -r ound comfort for the next generation. This manual gives you complete instruc- tions for installing and operating your fan. All Hunter ceiling fans will provide comfort and performance in your home or office for many years.
3 41277-01 05/98 ® CONTENTS Important Information .......................................................................................................... ............................. 4 Step 1 - Getting Ready ......................................
4 41277-01 05/98 ® IMPOR T ANT INFORMA TION DO YOU NEED HELP? T o install a ceiling fan, be sur e you can do the following: • Locate ceiling joist or other suit- able support in ceiling. • Drill holes for and install wood scr ews. • Identify and connect electrical wir es.
5 41277-01 05/98 ® GA THERING THE TOOLS Y ou need the following tools to in- stall the fan: • Electric drill with 9/64" bit • Standard scr ewdriver • Phillips-head scr ewdriver • Wr ench or pliers OPTIONAL ACCESSORIES Consider using Hunter’ s optional ac- cessories, such as a wall-mounted or r emote speed control.
6 41277-01 05/98 ® INST ALLER’S CHOICE ® This patented 3-position mounting system gives you maximum flexibil- ity and ease of installation. The steps in this manual include specific in- structions for the fan mounting method of your choice. For a ceiling 8 feet or higher , standard mounting is recommended.
7 41277-01 05/98 ® 4. Align the slotted holes in the ceil- ing plate with the pilot holes in the wood support structure. Note: The isolation pads should be flush against the ceiling. 1. Drill two pilot holes into the wood support structure thr ough the outermost holes on the outlet box.
8 41277-01 05/98 ® Figure 2c - Attaching Ceiling Plate to 2 x 4 Brace 2 x 4 Brace Ceiling Joist Ceiling Outlet Box Ceiling Plate Flat Washer 3" W ood Screw 5. Place a flat washer on each of the two 3" screws and pass the screws thr ough the slotted holes in the ceiling plate as shown in Figure 2c.
9 41277-01 05/98 ® Follow sub-step 1 below for all fans. Then, use the additional instructions for the type of mounting you have selected: flush, standard, or angle.
10 41277-01 05/98 ® 4. Attach the canopy tightly to the fan assembly with thr ee #8-32 x 3/4" assembly scr ews and #8 lockwashers as shown in Figur e 3d. Note: Pipe, ball, and setscrew not used for flush mounting. Standard and Angle Mounting (For 8-foot Ceilings and Higher) 1.
11 41277-01 05/98 ® STEP 4 - WIRING THE F AN 1. Disconnect the power by tur ning off the cir cuit breakers to the out- let box and associated wall switch location. 2. T ilt and hang the assembled fan from the ceiling plate hooks. Slip two rectangular canopy slots over ceiling plate hooks as shown in Figures 4a and 4b.
12 41277-01 05/98 ® Figure 4c - Wiring Diagram Bare or Green Approved Connectors Power Wires In Ceiling White White Black Black/White 1 2 Connections: Black Wall Switch Wire For Separate Control of L.
13 41277-01 05/98 ® STEP 5 - HANGING THE F AN Figure 5a - Attaching Canopy to Ceiling Plate Figure 5b - Canopy T abs and Grooves in Hanger Ball Sub-steps 1 and 2 apply to Flush, Standard, and Angle mounting. Sub- step 3 applies to Standard and Angle mounting only .
14 41277-01 05/98 ® Figure 6a - Attaching Fan Blade to Speed Ring™ Using Decorative Medallion (Speed Ring™ Positioned Upside Down) STEP 6 - A TT ACHING BLADE ASSEMBL Y Speed Ring™ (Positioned U.
15 41277-01 05/98 ® Figure 6b - Attaching Gr ommets to Speed Ring™ Figure 6c - Attaching Speed Ring™ to Motor A TT ACHING SPEED RING™ TO MOTOR 1. Position three grommets in the cut-out slots in the Speed Ring™ as shown in Figure 6b. 2. Lift the Speed Ring™ to the un- derside of the motor .
16 41277-01 05/98 ® A TT ACHING SPEED RING™ COVER 1. Remove plug button as shown in Figure 6e. 2. Remove the switch housing cover and switch housing cap by r emov- ing the two screws as shown in Figure 6e. Do not discar d the screws, cover , or cap.
17 41277-01 05/98 ® STEP 7 - A TT ACHING LIGHT FIXTURES Figure 7a - Removing Plug Button and Switch Housing Cover Switch Housing Cover Plug Button Y our Whisperwind 2000™ fan may include a light fixture. Y ou may en- joy the fan with or without the light fixture.
18 41277-01 05/98.
19 41277-01 05/98 ® A TT ACHING LIGHT FITTER TO F AN SWITCH HOUSING Low-Profile Lights 1 . Unscr ew the two #6 x 1/2" mounting screws to r emove the light fixture cover plate as shown in Figure 7c. Do not discar d the screws. 2. Assemble the switch housing cover to the light fixture housing.
20 41277-01 05/98 ® Figure 7f - Aur ora Fixtures AURORA FIXTURES Refer to Figure 7f..
21 41277-01 05/98 ® LOW -PROFILE FIXTURES Refer to Figure 7g. 1. Install bulbs. 2. Insert globe. 3. Install and tighten thumbscrews manually . Do not overtighten.
22 41277-01 05/98 ® OPERA TING YOUR HUNTER F AN 1. T urn on electrical power to the fan. 2. The pull chain controls power to the fan. The chain has four set- tings in sequence: High, Medium, Low and Of f. • Pull the chain slowly to change settings.
23 41277-01 05/98 ® TROUBLESHOOTING Nothing happens; fan does not move. Noisy operation. 1. Power tur ned off, fuse blown, or circuit br eaker tripped. 2. Loose wire connections or wrong connections. 3 . Motor reversing switch not en- gaged. 4. Pull chain switch not “on.
24 41277-01 05/98 ® Hunter Fan Company 2500 Frisco A venue Memphis, TN 38114 PROBLEM PROBABLE CAUSE SOLUTION Excessive wobbling. Note: When switching from medium to low speed, you may notice some fan wobble. When the fan stabilizes at low speed, wobble will disappear .
An important point after buying a device Hunter Fan WHISPERWIND2000TM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hunter Fan WHISPERWIND2000TM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hunter Fan WHISPERWIND2000TM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hunter Fan WHISPERWIND2000TM you will learn all the available features of the product, as well as information on its operation. The information that you get Hunter Fan WHISPERWIND2000TM will certainly help you make a decision on the purchase.
If you already are a holder of Hunter Fan WHISPERWIND2000TM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hunter Fan WHISPERWIND2000TM.
However, one of the most important roles played by the user manual is to help in solving problems with Hunter Fan WHISPERWIND2000TM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hunter Fan WHISPERWIND2000TM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
