Instruction/ maintenance manual of the product 81003 Hunter Fan
Go to page of 14
41937-01 10/26/2010 1 Bath V entilator with Light Owner ’ s Manual Ashbury 41937-01 20101026 ©2010 Hunter Fan Co. Model 81003 English.
41937-01 10/26/2010 2 DISCONNECT ELECTRIC POWER SUPPL Y AND LOCK OUT SER VICE P ANEL BEFORE SER VICING UNIT W ARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJUR Y TO PERSONS, OBSERVE THE FOLLOWING: 1. For general ventilating use only . Do not use to exhaust hazard- ous or explosive materials and vapors.
41937-01 10/26/2010 3 E F G H I L M N 95047-03-000 77481-01-000 03242-07-133 95261-02-000 74508-03-133 96397-01-214 for model 81001 96397-02-444 for model 81003 75184-01-133 86812-01-000 J 77522-01 K 65219 O 75733-01-214 for model 81001 75733-01-444 for model 81003 x4 * * * NOTE: Strain relief cable connector must be installed.
41937-01 10/26/2010 4 5 4 7 G 8 F Remove the motor/blower from the housing. H E 3 Remove the pre-loaded screw tip covers. Remove the wiring cover screw. 6 Back out the pre-loaded screw tips until flush with the side of the housing. Remove the wiring cover .
41937-01 10/26/2010 5 9 E Pop out the first wiring access slug. Use second if needed. Insert the strain relief (not included) into the housing and secure with washer . Position the correct depth mark at the bottom edge of the joist based on the thickness of your sheetrock.
41937-01 10/26/2010 6 A 3 Pin 2 Pin Fan Motor Light Light Green Black Black White Black Black White White Bare Copper Ground A 1 4 Main Switch 1 (AC In) Switch 2 (AC In) *Option Fan & Main Light T ogether *Option Connect wires as shown. A 1 3 Route wires through the strain relief.
41937-01 10/26/2010 7 A 1 9 I A 2 0 Reinstall the motor by inserting the tabs and pushing up into position. Make sure the wires are not pinched between the motor and the housing. Secure the motor by tightening the 2 screws. T urn on the power source. Connect wiring harness.
41937-01 10/26/2010 8 EXISTING F AN B 1 1 E B 1 2 Existing Construction B 1 3 2 1 B 1 4 Route wires through the strain relief. For supply connec- tion, use wires suitable for at least 90º C (194º F). Remove an existing fan and check to make sure the opening is large enough to accommodate the new motor housing (7 1/4”x 7 3/4”).
41937-01 10/26/2010 9 H B 1 8 H B 1 9 B 2 0 I Reinstall the motor by inserting the tabs and pushing up into position. Make sure the wires are not pinched between the motor and the housing. Connect wiring harness. DO NOT ALLOW THE MOTOR TO HANG FROM THE WIRING HARNESS.
41937-01 10/26/2010 10 O N O FF B 2 2 B 2 3 C1 Go to step on page 10 to attach grille . B 2 1 T est the motor . If the motor does not run, check the plug connection. T urn on the power source. L O C 2 N M C 1 Attaching the Grille Remove the thumbscrews.
41937-01 10/26/2010 1 1 C 4 K C 5 J C 6 Remove the strain relief bracket screw. Position the strain relief bracket under the motor as shown. Insert the strain relief bracket’s dog-leg tab so that it hooks over the lip of the motor . Reinstall the strain relief bracket screw.
41937-01 10/26/2010 12 C 9 C 1 0 N O C 1 1 Align glass dome and push up. Install 2 Max 60 Watt A15 bulbs (Not Included). Screw glass dome into position.
41937-01 10/26/2010 13 T rouble Shooting Problem: Fan does not come on. Solution: • Hunter Fan Bath V entilators are extremely quiet. T o conrm that the fan is running, place your hand near the vents to feel the air movement. • T urn power on, replace fuse, or reset breaker .
41937-01 10/26/2010 14 7130 Goodlett Farms Pkwy Suite 400, Memphis, T ennessee 38016 Printed in China © 2010 Hunter Fan Company W arranty Hunter Fan Company Bath Exhaust Fan LIMITED W ARRANTY Hunter .
An important point after buying a device Hunter Fan 81003 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hunter Fan 81003 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hunter Fan 81003 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hunter Fan 81003 you will learn all the available features of the product, as well as information on its operation. The information that you get Hunter Fan 81003 will certainly help you make a decision on the purchase.
If you already are a holder of Hunter Fan 81003, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hunter Fan 81003.
However, one of the most important roles played by the user manual is to help in solving problems with Hunter Fan 81003. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hunter Fan 81003 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
