Instruction/ maintenance manual of the product Pro Slam Rim Huffy
Go to page of 9
1 08/05 ID# M788001 © COPYRIGHT 2000 by HUFFY SPORTS Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-632-7921 Internet Address: http://www.
2 ID# M788001 08/05 Owner must ensure that all players know and follow these rules for safe operation of the system. W ARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net.
08/05 ID# M788001 3 For more information on assembly, placement, proper use, and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p arts are p acked inside.
4 ID# M788001 08/05 SPRING SLAM JAM BRACKET SUPPORT STRUT Item Qty . Part No. Description 1 1 579800 W arning Label 2 1 900033 Slam Jam Bracket, Black 3 1 203796 Bolt, “T ee” 3/8 - NC x 5 Long 4 1 200318 Bracket Reinforcement, Slam Jam 5 1 203472 S pring, Black 6 1 203470 W asher , Flat 5/8 I.
08/05 ID# M788001 5 Item #8 (4) 20161 1 #1 1 (4) #5 (1) #3 (1) #2 (1) #10 (4) #4 (1) HARDW ARE IDENTIFIER #7 (1) #8 (4) 203104 #8 (4) 2031 13 #8 (4) 205528 For S teel Framed Acrylics RIM T O BOARD BOL TS (This kit will only include 4 of one of the bolts listed below): These items may not be included with your set-up.
6 ID# M788001 08/05 2 #2 1. Place Slam Jam bracket (2) onto rim bracket. HARDW ARE USED IN THIS SECTION (not actual size) Lip of Slam Jam bracket will hook over rim bracket. NOTE: 12 HARDW ARE USED IN THIS SECTION 12 3 #3 (not actual size) 2. Insert tee-bolt (3) into Slam-Jam bracket (2).
08/05 ID# M788001 7 HARDW ARE USED IN THIS SECTION 3 7 6 5 4 #7 #6 #5 (not actual size) Tighten nut (7) until flush with end of tee-bolt (3) as shown. NOTE: 2.
8 ID# M788001 08/05 3. Connect rim using bolts (8), washers (10) and nuts (1 1). #1 1 #10 2 BOLTS (8) WILL VARY DEPENDING ON WHAT TYPE OF BOARD THE RIM IS BEING ATTACHED TO (SEE HARDWARE IDENTIFIER). NOTE: 10 ft. (3.05M) REGULATION RIM HEIGHT IS 10 FEET (3.
08/05 ID# M788001 9 2. 4. 3. 1. 14 12 15 5. Attach spring cover using self t apping screws (14). Apply logo label (13) to spring cover (15) as shown. 6.
An important point after buying a device Huffy Pro Slam Rim (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Huffy Pro Slam Rim yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Huffy Pro Slam Rim - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Huffy Pro Slam Rim you will learn all the available features of the product, as well as information on its operation. The information that you get Huffy Pro Slam Rim will certainly help you make a decision on the purchase.
If you already are a holder of Huffy Pro Slam Rim, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Huffy Pro Slam Rim.
However, one of the most important roles played by the user manual is to help in solving problems with Huffy Pro Slam Rim. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Huffy Pro Slam Rim along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
