Instruction/ maintenance manual of the product Pro Image Rim Huffy
Go to page of 12
1 11/03 P/N 211644 © COPYRIGHT 2000 by HUFFY SPORTS Toll-Free Customer Service Number for U.S: 1- 888-713-5488, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-333 061 Internet Address: http://www.
2 P/N 211644 11/03 WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the unit. 211401 9/97 See instruction manual for proper installation and maintenance.
11/03 P/N 211644 3 For more information on assembly, placement, proper use, and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are packed inside.
4 P/N 211644 11/03 Item Qty . Part No. Description 11 R i m 2 2 202604 Bolt, Carriage 3/8 x 4.75” Long 3 2 203474 W asher , Flat, 1”O.D. 4 2 203017 Hex Nut, 3/8” 5 2 203063 Nylon Lock-Nut, 3/8” 6 8 203232 W asher , 3/4” O.
11/03 P/N 211644 5 HARDW ARE IDENTIFIER (NUTS & W ASHERS) HARDW ARE IDENTIFIER (MET AL SP ACERS & NYLON W ASHERS) Item #3 (2) Item #4 (2) Item #5 (2) Item #6 (8) Item #8 (2) Item #10 (2) Item .
6 P/N 211644 11/03 1 3 2 9 4 Install two carriage bolt s (2) through rim (1), washers (3), and lock washers (9) as shown. T ighten nuts (4) completely . 1. Place a special locking nut (20) approximately half-way up on each carriage bolt (2) as shown. Keep the two special locking nuts (20) at the same level.
11/03 P/N 211644 7 3a. 1 13 20 Then, insert spacer (10) through back bracket (13), nylon washers (22) and rim assembly (1). BOTTOM VIEW 13 10 Spacer flush with bracket BOTTOM VIEW 13 22 22 10 1 Ends of spacer (10) should be flush on both sides of board bracket (13).
8 P/N 211644 11/03 4. Install bolt (1 1) through top holes on bracket (13) using washers (6) and nut (5) as shown. T ighten completely . 11 6 6 10 5 22 22 Attach rim assembly to backboard and support structure by inserting bolt s (16) through bottom holes in back bracket (13).
11/03 P/N 211644 9 Position rim assembly (1) 90 degrees to back bracket (13) as shown. Place inner-bracket (14) over both carriage bolts (2) followed by springs (7), washers (8) and special nut s (21). NOTE: COMPLETED ASSEMBL Y : 6. T ighten special nuts (21) until flush with end of carriage bolts (2) as shown.
10 P/N 211644 11/03 First, test fit spacer (10) into back bracket (13) and Carefully rock in a circular motion to ream out any excess paint from holes if necessary . Insert sp acer (10) through bottom holes in board bracket (13) and inner bracket (14).
11/03 P/N 211644 11 11 6 5 6 10. Then, install bolt (1 1), washers (6), and nut (5) through sp acer (10) and tighten completely . LEVELING AND TENSION ADJUSTING INSTRUCTIONS: Place level on rim (1) and adjust nut (20) until level. T ighten nut (21) to set rim tension for playing.
12 P/N 211644 11/03 10 feet (3.05 m) Secure net (18) to rim (1). NOTE: Official rim height is 10-0’ (3.05 m) from top of rim to playing surface. 1 2 3 4 1 OUTSIDE VIEW 13. Apply logo label (19) to cover plate (15). Install cover plate (15) on rim (1) using self tapping screws (12) as shown (note orient ation of cover plate).
An important point after buying a device Huffy Pro Image Rim (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Huffy Pro Image Rim yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Huffy Pro Image Rim - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Huffy Pro Image Rim you will learn all the available features of the product, as well as information on its operation. The information that you get Huffy Pro Image Rim will certainly help you make a decision on the purchase.
If you already are a holder of Huffy Pro Image Rim, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Huffy Pro Image Rim.
However, one of the most important roles played by the user manual is to help in solving problems with Huffy Pro Image Rim. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Huffy Pro Image Rim along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
