Instruction/ maintenance manual of the product LXi-1100 Hubbell
Go to page of 2
Hubbell Industrial Controls, Inc. Electric Fire Pump Controllers Specifications for LXi 1100 Controllers * Solid State Soft-Start/Stop * July 2002 The fire pump controller shall be factory assembled, .
The controller shall have two sets of Form “C” contacts for Pump Running, Phase Reversal, and Power/Phase Failure, and one set of Form “C” contacts for Trouble.
An important point after buying a device Hubbell LXi-1100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hubbell LXi-1100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hubbell LXi-1100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hubbell LXi-1100 you will learn all the available features of the product, as well as information on its operation. The information that you get Hubbell LXi-1100 will certainly help you make a decision on the purchase.
If you already are a holder of Hubbell LXi-1100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hubbell LXi-1100.
However, one of the most important roles played by the user manual is to help in solving problems with Hubbell LXi-1100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hubbell LXi-1100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
