Instruction/ maintenance manual of the product FA 400.2 HSM
Go to page of 20
OPERA TING MANUAL SHREDDER HSM F A 400.2 english Keep in a safe place for future use! 1.513.999.1 12 – 0702.
2 0702 F A 400.2 Contents 1. Proper use, warranty ................................................................................................................. 3 2. Safety instructions ..............................................................
0702 3 F A 400.2 Danger of injury Do not reach into the paper feed opening. Splinters can cause injury Before destroying credit cards and store cards, CD-ROMs or fl oppy disks, you must fi t a splinter guard (strip curtain, order no. 1.513.050.445).
4 0702 F A 400.2 3. Overview 1 Main switch (only solo-version) 2 Keypad 3 Emergency stop button 4 Loading tray 5 Option: extra-wide work table 6 Left cover panel 7 Right cover panel 8 Intake conveyor .
0702 5 F A 400.2 4. Dimensions HSM F A 400.2 Solo version 1564 1646 1208 804 1 157 HSM F A 400.2 Combi version 1644 1646 1208 804 1 157 Transportation dimensions (without tray) Space requirements for .
6 0702 F A 400.2 5. T ransportation, installation • Place the shredder in its packaging on a smooth, level surface. • Remove the packaging. • If you need to move the shredder through narrow doors, you can wait until it is at its fi nal location before fi tting the loading tray .
0702 7 F A 400.2 Ready for operation Green LED W aste bag full Red LED Start button The shredder switches on. The feed belt moves in the intake direction. Stop button The cutting block and feed belt stop. The shredder is in standby mode. Reverse button The cutting block and feed belt run in reverse.
8 0702 F A 400.2 Place the material to be shredded on the loading tray and then place batches on the feed belt. If material that is not supposed to be shred- ded is mistakenly placed onto the belt, never attempt to pull it out. • Press the stop button.
0702 9 F A 400.2 8. Malfunctions Check the following before calling customer service: • Is the power plug connected? • Is the shredder switched on? • Is the front door closed? • Is the waste b.
10 0702 F A 400.2 Note: Do not tighten the chain too much, as this will cause premature wear on the chain and bearings. 9. Maintenance and care Cleaning the cutting block Strip cut machines: (1 x daily) • Switch off the shredder . • Squirt special cutting apparatus oil through the paper feed opening onto the blade roll- ers.
0702 11 F A 400.2 Greasing the drive chains and cogs (twice yearly) • Switch off the shredder . • Pull out the power plug. • Remove the tray and the cover panels. • Grease the cogs and the drive chains from the motor to the cutting apparatus, the cut- ting block to the feed belt and the cutting block to the regulating roller .
12 0702 F A 400.2 1 1. T echnical data 10. Scope of supply , accessories • Machine on pallet with a wooden frame, strapped with packing tape and packed in foil • 4 waste bags, order no. 1.513.995.000 for 2-chamber system (Solo version) • 1 waste bag, order no.
0702 13 F A 400.2 12. Electric wiring diagrams 400 V / Sol o Legend: =A V : Shredder +S: in switch cabinet +MA: on machine +BF: Keypad Solo 400 V / 50 Hz.
14 0702 F A 400.2 400 V / Sol o.
0702 15 F A 400.2 400 V / Sol o.
16 0702 F A 400.2 Combination 400 V / 50 Hz.
0702 17 F A 400.2.
18 0702 F A 400.2.
0702 19 F A 400.2.
20 0702 F A 400.2 Declaration of Conformity Machinery directive 98 / 37 / EG EMC directive 89 / 336 / EWG Low voltage directive 73 / 23 / EWG The manufacturer HSM GmbH + Co. KG, Bahnhofstrasse 1 15, D-88682 Salem declares herewith, that the paper shredder (Solo machine) HSM F A 400.
An important point after buying a device HSM HSM FA 400.2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HSM HSM FA 400.2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HSM HSM FA 400.2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HSM HSM FA 400.2 you will learn all the available features of the product, as well as information on its operation. The information that you get HSM HSM FA 400.2 will certainly help you make a decision on the purchase.
If you already are a holder of HSM HSM FA 400.2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HSM HSM FA 400.2.
However, one of the most important roles played by the user manual is to help in solving problems with HSM HSM FA 400.2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HSM HSM FA 400.2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
