Instruction/ maintenance manual of the product Digital PC 500 HP
Go to page of 10
DIGIT AL PC 5100 MIS managers who demand security and manageability will want the DIGITAL ™ PC 5100 (formerly Celebris ™ FX-2). Optimized to run Windows NT ® or Windows ® 95, the DIGITAL PC 5100 comes loaded with features, from integrated audio, 3-D graphics, and networking to SMART drive technology and leading-edge security features.
DIGIT AL PC 5100 Competitive Comparison A • 20 DIGITAL ™ Compaq HP IBM Dell Features PC 5100 Deskpro 4000 XA PC 300PL OptiPlex GXi Processors 166 Pentium ® w/MMX 166 Pentium w/MMX 166 Pentium w/M.
DIGIT AL PC 5100 Processors Model/Processor/Speed/Enclosure: DIGITAL ™ PC 5100 low-profile/short-tower 166MHz Pentium ® processor with MMX technology 200MHz Pentium processor with MMX technology 23.
DIGIT AL PC 5100 T echnical Specifications A • 22 Multilevel Security and Manageability SecureON for secure remote system wake-up SecureBIOS for firmware tampering prevention SecureBOX for system bo.
For updated information refer to www.windows.digital.com DIGIT AL PC 5100 Par t Numbers A • 23 Configurations All configurations include: 3.5" 1.
Front View DIGIT AL PC 5100 Perspectives A • 24 Back View Low-profile Enclosure Microphone Jack Power On/Off Switch 3.5" 1.44MB Diskette Drive (standard) Front-accessible 5.
Perspectives A • 25 A Internal View (with case removed) Low-profile Enclosure Internal Hard Disk Drive 3.5" 1.44MB Diskette Drive Slide-in/Slide-out Motherboard Three DIMM Sockets CD-ROM Drive .
DIGIT AL PC 5100 Perspectives A • 26 Back View Short-tower Enclosure Front View Power Button 3.5" 1.44MB Diskette Drive (standard) Reset Button Indicator Lights CD-ROM Drive (select models) Front-accessible 5.
DIGIT AL PC 5100 Perspectives A • 27 A Internal Side View (with motherboard pulled out) Short-tower Enclosure Swing-out Hard Disk Drive Bracket 3.5" 1.44MB Diskette Drive CD-ROM Drive (select models) Slide-in/Slide-out Motherboard Three 168-Pin DIMM Sockets 200W Power Supply Two 3.
DIGIT AL PC 5100 Memor y Configurations A • 28 DIGITAL ™ PC 5100 Memory Configurations Total Socket J7 Socket J6 Socket J5 Memory Dual-Bank Dual-Bank Single-Bank 16MB 16MB 32MB 16MB 16MB 32MB 32MB.
An important point after buying a device HP Digital PC 500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP Digital PC 500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP Digital PC 500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP Digital PC 500 you will learn all the available features of the product, as well as information on its operation. The information that you get HP Digital PC 500 will certainly help you make a decision on the purchase.
If you already are a holder of HP Digital PC 500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP Digital PC 500.
However, one of the most important roles played by the user manual is to help in solving problems with HP Digital PC 500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP Digital PC 500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
