Instruction/ maintenance manual of the product J9833AABA HP (Hewlett-Packard)
Go to page of 8
1 HP PS1810-8G Switch Quick Setup Guide, and Safety/Regulatory Information For more deta iled instructio ns and informat ion to set up your switch, view or do wnload the Installation and Get ting Started Guide for your switch at www .hp.com/networking/supp ort .
2 W all Mounting : Install two 5/8-inch (15.875 mm) Number 12 wood screws, (included) into the mounti ng surface, positioned 6.3 inches (160 mm ) apart. Use the wall anchors if necessary . Then, position th e switch over the screws and slide to lock in place.
3 4 . Connect the network cables. Connect network devices, such as an HP ProLiant MicroServer Gen8, to any of the switch’ s RJ-45 ports using Class 5E or better Ethernet cables. Note: Any of the switch’ s network ports can be used f or the following connection s.
4 5 . Power on and verify that Self-T est completes normally . The switch does not have a power swi tch. It is powered on by connecti ng the AC power adap ter supplied with your switch.
5 Managing the Switch via the 192.168.2.10 Address If the switch do es not acquire an IP address via the DHCP request, it defaults to the following confi guratio n: To communicate with the switch via the 192 .168.2.10 address, follow these procedures: 7.
6 Safety and Regulatory Inform ation for HP PS1810-8G Switch T o avoid personal injury or product damage wh en installing your switch, read the inst allation precautions and gu idelines below .
7 Product Specifications Chinese Altitude Warning HP PS1810-8G Switch (J9833A) Electrical: For power, require s one of the following: • External power adapter module. See “PS1810-8G External Power Adapters and Power Cords:” on page 8 • or , PoE PD connection to Port 1.
8 PS1810-8G External Power Adapters and Power Cords: Japan Power Cord W arning Universal inline power adapter (5066-1122*) specifications: – AC Input V oltage: 100-240 V – Maximum AC Input Current: 0.5 A – AC Input Frequency Range: 50/60 Hz – Power Consumption: 15 W – DC Output V oltage: 12 ± 10% V – Maximum DC Output Current: 1.
An important point after buying a device HP (Hewlett-Packard) J9833AABA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) J9833AABA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) J9833AABA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) J9833AABA you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) J9833AABA will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) J9833AABA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) J9833AABA.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) J9833AABA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) J9833AABA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
