Instruction/ maintenance manual of the product HP Kayak XM600 HP (Hewlett-Packard)
Go to page of 41
Installing and Replacing Hardware Parts in Y our PC Wo rkstatio n This chapter provides information about installing accessories and replacing hardware parts in your PC Workstation . Contact your dealer for an up-to-date l ist of suppo rted devices or che ck the HP web si te: http://www .
Installing and Replacing Hardware Par ts in Your PC Workstation 2 HP Kayak XM600 PC Workstati on Syste m Board HP Kayak XU800 PC Wor kstat ion System Board Up to six accessory cards can be installed: .
Installing and Replacing Hardw are Parts in Your PC Workstation Removing a nd Replacing the Cover a nd Front Bezel 3 Removing and Rep lacing the Cover and Front Bezel Removin g the Cove r For yo ur own safe ty , it is r ecommende d that you first r ead the w arning notices on in the Introductory Sect ion.
Installing and Replacing Hardware Par ts in Your PC Workstation Removing and Rep l acing t he Cover and F ront Bezel 4 NOTE Take care when removing t he upper an d lower beze ls. They are n ot on a hinge , so do not force them open. To remove the upper and lower bezels: a Unclip the two clips located on the left-hand side of the bezel.
Installing and Replacing Hardw are Parts in Your PC Workstation Removing and Replacing the Airflow Guide 5 Removing and Rep lacing the Airfl ow Guide Removin g the HP UltraFlow Airflow Guide 1 Switch off the display and PC Workstation. Disconne ct all power cables and any LAN or tele communications cables.
Installing and Replacing Hardware Par ts in Your PC Workstation Removing and Rep l acing a P rocessor 6 Removing and Re placing a Processor Single-processor sy stems can be upgraded to dual-proce ssor systems by installing a second processor in the vacant processor slot.
Installing and Replacing Hardw are Parts in Your PC Workstation Removing and Repla c ing a Processor 7 Installing a Proce s sor 1 Ensure that the edges of the processor are lined-up with the processor connec tor gu ide rail s alon g the r etentio n mechan ism.
Installing and Replacing Hardware Par ts in Your PC Workstation Removing, Replacing a nd Upgrading Memory on HP Kaya k XM600 Models Shipped with SDRAM 8 Removing, Replaci ng and Upgrading Memory on HP.
Installing and Replacing Hardw are Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on HP Kayak XM600 Models Shipped with SDRAM 9 5 To install a module , ensure that t he two notches of the memory module are align ed with those of th e soc ket.
Installing and Replacing Hardware Par ts in Your PC Workstation Removing, Replacing a nd Upgrading Memory on HP Kaya k XM600 Models Shipped with SDRAM 10 6 Relea se t he reta ining scr ew lo cate d on the Memory Expansi on Card. Then remove the s cr ew from accessory card slot.
Installing and Replacing Hardw are Parts in Your PC Workstation Removing, Re placing and Upgrading Memory on HP Kayak XM600 Models Shipped wi th RDRAM 11 Removing, Replacin g and Upgrading Memory on H.
Installing and Replacing Hardware Par ts in Your PC Workstation Removing, Replacing a nd Upgrading Memory on HP Kaya k XM600 Models Shipped with RDRAM 12 8 Check the HP Summary Screen to ve rify the new c onfiguration (refer to “Viewing th e HP Summary S creen” i n the Se ction on “Set ting Up an d Usin g Your PC Works tation”) .
Installing and Replacing Hardw are Parts in Your PC Workstation Memory Upgrades on the HP Kayak XU800 13 Memory Upgrades on the HP Kayak XU800 There i s a si ngle M emory Exp ansion Card connector on the system board that supports a Memory Expan sion Car d install ed with e ither RIM M or DIMM sockets .
Installing and Replacing Hardware Par ts in Your PC Workstation Memory Upgrades on t he HP Kay ak XU800 14 • Four DIMM sockets. Each socket hosts SD RAM 100 MHz non-EC C memory modules that are used in pairs. The first two DIMM sockets A0-B0, closest to the system board, contain the first pair of memory modules.
Installing and Replacing Hardw are Parts in Your PC Workstation Memory Upgrades on the HP Kayak XU800 15 8 Remove memory modu les and any continuity modules f rom the old Memory Expansion Card, then install them in the same positions on the new Memory Expansion Card.
Installing and Replacing Hardware Par ts in Your PC Workstation Memory Upgrades on t he HP Kay ak XU800 16 Installing or Replacin g a Memory Module 1 Switch off the display and PC Workstation. Disco nnect all power cables and any LAN or te lecommunications cables.
Installing and Replacing Hardw are Parts in Your PC Workstation Removing and Re placing a PCI Accessory Card 17 Removing and Rep lacing a PCI Accessory Card To remove or install an accessory card, complete t he following steps: 1 Switch off the display and PC Workstation.
Installing and Replacing Hardware Par ts in Your PC Workstation Removing and Rep lacing a PCI Accessory C ard 18 The following table shows the various P CI card in stallations fo r the different PCI slots on t he HP K ayak X U800: Universal AGP PRO slot (Kayak XM600 and Ka yak XU800) PCI Card 5 V 3.
Installing and Replacing Hardw are Parts in Your PC Workstation Installing Mass Storage Device s 19 Installing Mass Storage Devices The PC has an integrated Ultra ATA-66 controller t hat supports up to four IDE devices. Removable media IDE devices, such as CD-ROM drives, DVD drives, tape drives and Zip drives, require front access.
Installing and Replacing Hardware Par ts in Your PC Workstation Installing Mass Storage Devices 20 • The ATA IDE cable supports two IDE devices. This cable is connected to the Primary IDE co nnector on the sy stem board. The bootable hard disk drive is conn ected to this cable via th e MASTER conne ctor.
Installing and Replacing Hardw are Parts in Your PC Workstation Installing Mass Storage Device s 21 HP Kayak X U800 Cable s and Co nnecto rs Which SCSI Con necto rs to Us e There is an internal SCSI connector on the system board that enables you to co nnect up to five inter nal S CSI devi ces.
Installing and Replacing Hardware Par ts in Your PC Workstation Installing Mass Storage Devices 22 You shoul d assign an unuse d SCSI ID to the second SC SI hard disk drive (for exampl e, SCSI ID 1). The SCS I ID is usua lly confi g ured wit h jumpe rs on the SCSI hard disk drive.
Installing and Replacing Hardw are Parts in Your PC Workstation Removing and R e placing the Primary Ha r d Disk Drive 23 Removing and Rep lacing the Primary Hard Disk Dr ive CAUTION Handle the hard disk drive with c are. A void shocks and violent movement as this can cau se damage to the h ard disk drive’ s internal components.
Installing and Replacing Hardware Par ts in Your PC Workstation Removing and Rep lacing the Primar y Hard Disk Drive 24 CAUT ION Config ure th e new hard disk dri ve with the same s ett ings as th e old o ne. Installing the New Drive 1 Add th e short blue guid e rai ls to t he new har d disk dr ive.
Installing and Replacing Hardw are Parts in Your PC Workstation Installing a Second Hard Disk Dr ive in an Internal Shelf 25 Installing a Secon d Hard Disk Drive in an Internal Sh elf The internal shelves can support two 3.5-inch devices. The ma ster hard disk drive must be installed in the top shelf when using an ID E configurat ion.
Installing and Replacing Hardware Par ts in Your PC Workstation Installing an Accessory in the Front Access Cage 26 Installing an Accessory i n the Front Access Cage 1 Switch off the display and PC Workstation. Disco nnect all power cables and any LAN or te lecommunications cables.
Installing and Replacing Hardw are Parts in Your PC Workstation Installing an Accessor y in the Front Access Cage 27 5 Alig n the gu ide rail s on bo th sides of the drive with th e inter nal shel f guide s and th en sl ide the drive u ntil i t clicks i nto p ositio n.
Installing and Replacing Hardware Par ts in Your PC Workstation Replacing the CD-ROM Drive (or DVD-Drive) 28 Replacing the CD-ROM Drive (or DVD-Drive) Removin g the Old Drive 1 Switch off the display and PC Workstation. Disco nnect all power cables and any LAN or te lecommunications cables.
Installing and Replacing Hardw are Parts in Your PC Workstation Replacing the Floppy Disk Drive 29 Replacing the Flop py Disk Drive Removin g the Floppy Disk Drive 1 Switch off the display and PC Workstation. Disconne ct all power cables and any LAN or tele communications cables.
Installing and Replacing Hardware Par ts in Your PC Workstation Completing the I nstallation of a Mass Storage Device 30 Completing the Installation of a Mass Storag e Device When an IDE Drive Is Installed 1 Switch on th e computer. 2 If an error message appears, follow th e instruction s provided b y the Error Message Utility .
Installing and Replacing Hardw are Parts in Your PC Workstation Replacing the Power Supply Unit 31 Replacing th e Power Supply U nit WARN ING Hewlett-Pa ckard do es not support power supply upgrades. This informat ion is p rovided to help you replace a defec tive power su pply unit.
Installing and Replacing Hardware Par ts in Your PC Workstation Replacing the Power S upply Unit 32 Installing the Power Supply Un it 1 Insert the new po wer supply uni t. 2 Secure it in p osition using th e three screws th at you removed in steps 6 and 7.
Installing and Replacing Hardw are Parts in Your PC Workstation Replacing the System Boa rd 33 Replacing the System Board Removin g the System B o ard 1 Switch off the display and PC Workstation. Disconne ct all power cables and any LAN or tele communications cables.
Installing and Replacing Hardware Par ts in Your PC Workstation Replacing the System Bo ard 34 Installing the New System Board 1 Clip the retai ning brac ket onto th e new system board. 2 Lower the system board onto the guide p ins ensuring that all hooks are correctly positi oned.
Installing and Replacing Hardw are Parts in Your PC Workstation Rep lac ing t he Re ar Fa n 35 Replacing the Rear Fan Removin g the Rear Fan 1 Switch off the display and PC Workstation. Disconne ct all power cables and any LAN or tele communications cables.
Installing and Replacing Hardware Par ts in Your PC Workstation Replacing the Rear Fan 36 Replac ing the Rear Fan 1 The rear fan ca n only b e inst alled in one way. From the re ar of t he PC Workstation, the two retaining clips should be positioned on the same side as the chassis edge.
Installing and Replacing Hardw are Parts in Your PC Workstation Replacing the Fan and S peaker Assembly 37 Replacing the Fan an d Speaker Assembl y Removin g the Fan and Speaker Assembly 1 Switch off the display and PC Workstation. Disconne ct all power cables and any LAN or tele communications cables.
Installing and Replacing Hardware Par ts in Your PC Workstation Replacing the Fan and Speaker Assembly 38 Replac ing the Fan and Speaker Assembly 1 Place the fan and speaker assembly behind the int ernal shelves (the speaker should be near the bottom edge of the chassis and facing towards the front of the PC W orkstation).
Installing and Replacing Hardw are Parts in Your PC Workstation Sys tem Boar d S witc he s 39 System Board Switches HP Kayak XM600 PC Workstation There are te n system board swi t ches used for configurat ion, numbered from 1 to 10.
Installing and Replacing Hardware Par ts in Your PC Workstation Syst em Board Swi tch es 40 HP Kayak XU800 PC Workstat ion There are te n system board switches use d for configur ation, nu mbered from 1 to 10. Of these a certain number are reserved and should not be modified , oth erwise it could lead to a s ystem fa ilure.
Installing and Replacing Hardw are Parts in Your PC Workstation Replacing the Ba ttery 41 Replacing the Battery WARN ING There is a dang er of explo sion if the batt ery is incorrectly in stalled. For your safety, n ever attempt to recha rge, disassemble, o r burn the o ld battery.
An important point after buying a device HP (Hewlett-Packard) HP Kayak XM600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) HP Kayak XM600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) HP Kayak XM600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) HP Kayak XM600 you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) HP Kayak XM600 will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) HP Kayak XM600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) HP Kayak XM600.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) HP Kayak XM600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) HP Kayak XM600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
