Instruction/ maintenance manual of the product 574412-DOC HP (Hewlett-Packard)
Go to page of 12
HP 3 6 -P ort Inf iniBand S w itc h C able Manageme nt K it Ins t allati o n Gui de HP P art Number : 5 7 44 1 2 -doc P ublished: Ma y 2009.
© Copyright 2009 Hewlett-P ackard Development Company , L.P . The information contained herein is subject to change without notice. The only w arranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
T able o f C onten ts 1 Pr epar ing for Ins tallati on ................................................................................................ 5 1 .1 A ud ie nc e ...............................................................................
4.
1 Pr epar ing f or Ins tallati on 1 . 1 A udie nce This guide is intended for HP service representatives and other persons trained to install hardw are options in the HP Rack 10000 Series. Such persons are expected to understand the hazards of working in this environment and to take suitable precautions to minimize danger to themselv es and others.
• 18 releasable cable ties shown in Figure 1-2 . Figur e 1 - 2 Releasable Cable Tie • The fasteners specified in T able 1-1 . T able 1 - 1 Fasteners Description T or que For mat Siz e Quantity Cage nut for M6 screw . N/A Square nut M6 cage nuts 2 Machine screw .
2 Inst alling the Cable Manageme nt Br ack et Figure 2-1 shows the correct orientation of the cable management bracket that y ou must install before connecting the cables to the InfiniBand switch. The bracket provides strain relief for the InfiniBand ports, and maintains the correct minimum cable bend radius.
cable management bracket, go around the bottom cable, and then back up through the first slot in the cable management bracket. 3. Put the releasable cable tie end through the buckle and secure the tw o InfiniBand cables firmly . Caution: Only hand-tighten the releasable cable tie to prevent damage to the InfiniBand cables.
3 R emo v ing Inf iniBand Ca bles and S w itc he s This chapter describes the procedure to remove a damaged InfiniBand cable or InfiniBand switch for repair .
3 .2 InfiniBand S w itc h Remo v al T o remove an InfiniBand switch, follow these steps: 1. Bring the InfiniBand switch to an appropriate state for service as described in the user guide for the switch. 2. Remove all of the InfiniBand cables from the InfiniBand switch, but leave them secured in the cable management bracket.
11.
*574412-doc* Prin ted in the US.
An important point after buying a device HP (Hewlett-Packard) 574412-DOC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) 574412-DOC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) 574412-DOC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) 574412-DOC you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) 574412-DOC will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) 574412-DOC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) 574412-DOC.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) 574412-DOC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) 574412-DOC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
