Instruction/ maintenance manual of the product 4250 HP (Hewlett-Packard)
Go to page of 8
1 Installing and Confi guring the HP Print Server Appliance (PSA Firmware version 2.4.x and above) Overview The HP Print Server Appliance (PSA) is designed for quick and easy installa tion and configuration. With a few configuration settings and a minimal am ount of time, the PSA will be up and running.
PSA 4250 Install and Configure 2 © Copyright Hewlett-Packard Co mpany 2003 Step 1: Connect the Cables Connectin g the cabl es is a 3-s tep proces s: 1. Rackmount the PSA (optional). A rackmount kit is shipped with the PSA for mounting it into an industry-standard rack or server cabi net.
PSA 4250 Install and Configure 3 © Copyright Hewlett-Packard Co mpany 2003 Figure 2 – Overview Page for the PSA Step 4: Configure TCPIP Network Settings To continue configurat ion the PSA, select TCP/IP and DNS unde r Networking . (The information in the gray box in Figure 3 was provi ded by the DHCP server or by you in Step 2 above.
PSA 4250 Install and Configure 4 © Copyright Hewlett-Packard Co mpany 2003 • DNS Domain Name : The fully-qualified Dom ain Name should be entered in this field.
PSA 4250 Install and Configure 5 © Copyright Hewlett-Packard Co mpany 2003 shows up on the PSA front panel during boot-up and in norma l operating mode. is the DNS Host name for the PSA. is the default NetBIOS name for the PSA that will show up in your Network Neighborhood.
PSA 4250 Install and Configure 6 © Copyright Hewlett-Packard Co mpany 2003 • Verify that the Domain administrator name and p asswo rd are correct. • Try to create a system account direct ly on the PDC through serve r manager.
PSA 4250 Install and Configure 7 © Copyright Hewlett-Packard Co mpany 2003 Figure 6 – Print Share List Page On the last screen in the wizard, you mu st install a dr iver for the print share. The driver can b e a pre- loaded driver (already on the PSA), or yo u can add a new driver by clicking Add Driver (Figure 7).
PSA 4250 Install and Configure 8 © Copyright Hewlett-Packard Co mpany 2003 Once the print share is configured with its driver on the PSA, c li ents can install the print share. Enabling and Disabling Drivers. On the Driver Management page (und er Print Services ), you can enable and disable dri vers.
An important point after buying a device HP (Hewlett-Packard) 4250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) 4250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) 4250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) 4250 you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) 4250 will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) 4250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) 4250.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) 4250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) 4250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
