Instruction/ maintenance manual of the product MSZ Hotpoint
Go to page of 24
Contents Before using the appliance, 2 Safeguarding the environment, 3 Precautions and general recommendations, 4 If the appliance is not going to be used, 5 Maintenance and cleaning, 6 Storing, freez.
! Y our new appliance is designed exclusively for domestic use. ! After unpacking the appliance, make sure it is not damaged and that the door closes properly .
GB 3 Safeguarding the environment Packing The packing material is 100% recyclable and bears the recycling symbol. For disposal, comply with local regulations. Keep the packing materials (plastic bags, polystyrene parts, etc.) out of reach of childr en, as they are a potential sour ce of danger .
GB 4 Precautions and general recommendations Installation • The appliance must be handled and installed by two or more persons. • Be car eful not to damage the floors (e.g. parquet) when moving the appliance. • During installation, make sur e the appliance does not damage the power cable.
GB 5 If the appliance is not going to be used In case of power failures of up to 24 hours Keep the doors of the appliance closed. In this way the stored food will stay cold as long as possible. If the appliance is not going to be used • Disconnect the appliance from the power supply .
GB 6 Maintenance and cleaning • Befor e any cleaning or maintenance operation, always disconnect the appliance from the power supply . • Periodically clean the appliance with a cloth and a solution of lukewarm water and neutral detergent specific for refrigerator interiors.
GB 7 Storing, freezing and thawing food Introduction Wrap food so that no water , moisture or condensate can enter; this will prevent odours or ar omas going from one part to another in the refrigerator , ensuring better preservation of fr ozen foods.
GB 8 A look inside Refrigerator Compartment A. Inside light (depending on model) B. Shelves C. Shelf - drawer lid D. Snack drawer (depending on model) E. Crisper drawer F . Crisper drawer moisture contr ol (where pr ovided) G. Meat / crisper drawer H.
GB 9 Guide to the inside parts Removing and repositioning the refrigerator compartment and freezer shelves. The shelves can be positioned as requir ed. The glass shelves are str ong enough to hold bottles, milk cartons and heavy food, however , take care not to bang products on the shelves.
GB 10 Using the appliance First use Connect the appliance to the water system and power supply (refer to the Installation manual). When connecting the appliance to the power supply , the display will show the temperatures pr eset by the manufacturer .
GB 11 Using the appliance Alarms In the event of an alarm, the acoustic alar m and indicator lights are activated. Important: T o disable the acoustic signal, press the Reset button above the alarm icon.
GB 12 Using the ice and water dispenser First use When the ice and water dispenser is used for the first time, the first ice cubes and water coming out of the dispenser may have an unpleasant taste and should therefor e be discarded.
GB 13 Using the automatic ice-maker After switching on the refrigerator , it usually takes overnight for the first ice cubes to for m. When selecting crushed ice, the cubes are crushed just before being dispensed, ther efore the crushed ice may come out with a slight delay .
GB 14 Changing a water filter cartridge 1. Locate the water filter cartridge cap below the freezer compartment door . Rotate the cap counterclockwise to a vertical position and pull the cap and filter cartridge out through the base grille. Note: Since there is water in the cartridge, some spilling may occur .
GB 15 T roubleshooting guide Before contacting After-sales Service... Operation problems ar e often due to minor causes that can be found and fixed without using any tools. Noises from the appliance ar e normal, since the fans and compressors for controlling its operation switch on and of f automatically .
GB 16 T roubleshooting guide Moisture has accumulated: There is water in the defrost pan: If the appliance temperature is too high: The applianceʼ s in contact with the seal is hot to the touch: The .
GB 17 T roubleshooting guide The ice has an unpleasant smell or taste: The dispenser does not dispense ice when the lever is pressed: If the dispenser does not dispense water when the lever is pressed.
GB 18 Assistance Guarantee 12 Months Parts and Labour Guaramtee Y our appliamce has the benefit of our manufacturer’ s guarantee, which covers the cost of breakdown repairs for twelve month the date of pur chase.
GB 19 Assistance After Sales Service No one is better placed to care for your appliance during the course of its working life than us - the manufacturer .
W arning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T .A. approved fuse to BS 1362 type and proceed as follows: 1. Remove the fuse cover ( A ) and fuse ( B ).
.
.
.
1 95085490.00 501961502064.
An important point after buying a device Hotpoint MSZ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint MSZ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint MSZ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint MSZ you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint MSZ will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint MSZ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint MSZ.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint MSZ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint MSZ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
