Instruction/ maintenance manual of the product HTS93G Hotpoint
Go to page of 8
Model: HTS93G.
2 EN ! It is important to conserve this booklet for consultation at any moment. In the case of sale, cession or move, make sure it is together with the product. ! Read the instructions carefully: there is important information about installation, use and safety.
3 EN Preliminary information for installing the hood: Disconnect the power supply at the domestic main switch before carrying out electrical connections. Remove the grease filter/s. 1. Using a pencil, draw the centre line on the wall up to the ceiling to facilitate installation operations.
4 EN Control panel Calibrating the control panel When the plug is inserted (or after a blackout) the system calibrates the keys; during calibration all the luminous display parts flash. Calibration lasts 15”. All the display parts stop flashing at the end of calibration.
5 EN ! We advise switching the hood on, at minimum power, before beginning to cook to favour the optimal expulsion of odours. In addition we advise turning it off every time 10/15 minutes after finishing cooking. ! We advise frying under the hood only under constant supervision.
6 EN ! It is always necessary to isolate the hood from the power supply during cleaning and maintenance. Therefore remove the plug. We recommend carrying our maintenance regularly (about every 10 days) to ensure efficacious and constant performance of the hood.
7 EN Cleaning the carbon filter It absorbs unpleasant odours caused by cooking. The charcoal filter can be washed once every two months (or when the filter saturation indication system – if envisage.
8 EN General safety ! Do not connect the appliance to the mains until the installation is fully complete. ! Before any cleaning or maintenance operation, disconnect the hood from the mains by removing the plug or disconnecting the home mains switch.
An important point after buying a device Hotpoint HTS93G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint HTS93G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint HTS93G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint HTS93G you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint HTS93G will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint HTS93G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint HTS93G.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint HTS93G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint HTS93G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
