Instruction/ maintenance manual of the product HS93I Hotpoint
Go to page of 9
MorleyWay, Peterborough,PE2 9JB,England www.hotpoint.co.uk Hood Instructions HOTpoint Oven 14-04-2005 8:48 Pagina 1.
GB Contents Installation, 2-3 Assembly Technical information, 4 Electrical connection Power cable Technical data Description, 5 Filtering version Ducting version Operation, 6 Controls Maintenance,7 Cl.
2 Installation 6) For the hoods in filtering version, fit the reducer (E). Securing the decorative flue 1) Assemble the support bracket of the decorative flue and adjust the width with the 2 screws (F). Then, using the screw anchors and the screws (G), secure it to the ceiling in such a way that it is in line with the hood.
3 d) Make the electrical connection of the hood by means of the power cable ( refer to the paragraph “Electrical connection” ). e) Lower the lower flue resting it on the hood. f) Check if the charcoal filter (P) has been installed. If not yet installed, proceed by sliding the 2 filter clips into their seats and turn the filter upwards.
4 Electrical connection ! Arrange the electrical power supply within the decorative flue dimensions. ! When making the electrical connections, check that the voltage values correspond to those indicated on the data plate inside the appliance itself.
5 Description The hood may be in the filtering or ducting version. Decide from the outset which type is to be installed. For better efficiency, we recommend installing the hood in the ducting version (if possible).
6 GB Operation Controls Speed increase button Repeatedly pressing the button will increase the motor speed until reaching the maximum speed (12th speed). Boost speed button Activates the motor at boost speed (13th speed) for 10 minutes, after which the motor goes back to running at the speed set previously.
7 Maintenance Replacing the charcoal filter If using the hood in the filtering version, the charcoal filter (P) will periodically have to be replaced. First of all, remove the metal grease filters. Push the catch towards the inside and remove the charcoal filter from its seat.
8 Disposal The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream.
An important point after buying a device Hotpoint HS93I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint HS93I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint HS93I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint HS93I you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint HS93I will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint HS93I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint HS93I.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint HS93I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint HS93I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
