Instruction/ maintenance manual of the product AQLF9D 69 U Hotpoint
Go to page of 20
EN 1 English,1 Contents Installation, 2-3-4-5 Unpacking and levelling Connecting the electricity and water supplies T echnical data Description of the machine, 6-7 Control panel Auto Dose System, 8-9 .
EN 2 Installation This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it.
EN 3 Connecting the drain hose Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor; The drain hose may be connected to an under - sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.
EN 4 As the colours of the wires in the lead may not correspond with the coloured markings identifyng the terminals in your plug, proceed as follows: Connect Green & Y ellow wire to terminal marked E o r or coloured Green or Green & Y ellow . Connect Brown wire to terminal marked L or coloured Red.
EN 5 T ech ni c al da ta Model AQLF9F 49 U Dimensi ons width 59. 5 c m he ight 85 cm de pth 64,5 c m Capac i ty fr om 1 to 9 k g Electric al connec tions pl eas e refe r t o t h e te ch n ical dat a plate fixed t o th e machin e W ater c onnections max i mu m pres s u r e 1 MP a ( 1 0 b ar) min i mu m p res s u re 0 .
EN 6 CONTROL P ANEL PORTHOLE DOOR PORTHOLE DOOR HANDLE KICK STRIP ADJUST ABLE FEET Description of the machine PORTHOLE DOOR Always use the handle to open the porthole door (see figure). DETERGENT DISPENSER DRAWER The detergent dispenser drawer is located inside the machine and can be accessed by opening the door .
EN 7 TEMPERA TURE button WASH CYCLE SELECTOR knob DOOR LOCKED indicator light ST ART/P AUSE button with indicator light WASH CYCLE PHASE icons DELA Y TIMER button CHILD LOCK button with indicator ligh.
EN 8 Introduction This washing machine is equipped with two tanks: one for liquid detergent (either concentrated or diluted) with a capacity of approx. 5.5 l and another for liquid fabric softener (either concentrated or diluted) with a capacity of approx.
EN 9 Signals for successive refilling: When the level of detergent/fabric softener falls below the required level, at the end of the cycle, the first segment of the detergent symbol or the petal of the fabric softener symbol in the bottom left section, will flash slowly on the display .
EN 10 Running a wash cycle WARNING: before you use the washing machine for the first time, run a wash cycle with detergent and no laundry , using the 90° cottons cycle without pre-wash.
EN 11 W ash options Detergent dosage T o dose the amount of detergent (refer to the chapter " Auto Dose System "). Concentrated Detergent T o modify the degree of detergent density (refer to the chapter " Auto Dose System ").
EN 12 Deter gents and laundry Detergent The type and quantity of detergent required depend on the type of fabric you are washing (cotton, wool, silk, etc.), as well as its colour , the washing temperature, the level of soiling and the hardness of the water in the area.
EN 13 Pr ecautions and tips The machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully .
EN 14 Car e and maintenance Cutting off the water and electricity supplies T ur n off the water tap after every wash cycle. This will limit wear on the hydraulic system in the machine and help to prevent leaks. Unplug the appliance when cleaning it and during all maintenance work.
EN 15 T r ouble shooting Y our washing machine could occasionally fail to work. Before contacting the T echnical Assistance Centre ( see Assistance ), make sure that the problem cannot be not solved easily using the following list. Problem: The washing machine does not switch on.
EN 16 T r oubleshooting: The machine's washing performance is unsatisfactory . What happens if the tanks are loaded even if they are already full? What happens if the dispenser is used in the tra.
EN 17 Assistance Guarantee 12 Months Parts and Labour Guarantee Y our appliance has the benefit of our manuf acturer s guarantee, which covers the cost of breakdown repairs f or twelve months from the date of purchase.
EN 18 After Sales Service No one is better placed to care f or your Hotpoint appliance during the course of its working lif e than us - the manuf acturer .
EN 19.
EN 20 195078506.04 09/2009 - Xerox Fabriano.
An important point after buying a device Hotpoint AQLF9D 69 U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint AQLF9D 69 U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint AQLF9D 69 U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint AQLF9D 69 U you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint AQLF9D 69 U will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint AQLF9D 69 U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint AQLF9D 69 U.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint AQLF9D 69 U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint AQLF9D 69 U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center