Instruction/ maintenance manual of the product HND 615 Hoover
Go to page of 17
I nstruction B ook HND 615 HND 615 SI DISHW ASHER.
3 CONTENTS Safety advice Setting up, installation W ater softener unit Adjusting the upper basket Loading the dishes Information for test laboratories Half load washing Loading the detergent and rinse.
Electrical connection Plug your dishwasher into the power socket. If the plug we supply does not fit : ■ CUT IT OFF AND DESTROY IT! Yo u can't use it on other appliances, and the exposed wires could be dangerous if anyone plugged it in. ■ Fit a suitable plug, as follows: W ARNING! THIS APPLIANCE MUST BE EARTHED.
7 Connecting the outlet hose ■ The outlet hose should disharge into a standpipe, making sure that there are no kinks (fig. 4) . ■ The standpipe must be at least 40 cm above floor level and it must have an internal diameter of at least 4 cm. ■ It is advisable to fit an anti-odour air trap (fig.
8 7 598 556/573 5 6 INST ALLA TION IN FITTED KITCHENS Fitting between existing cabinets ■ The height of the dishwasher , 85 cm, has been designed in order to allow the machine to be fi t te d b e tw ee n e xisting cabinets of the same height in modern fitted kitchens.
11 1 3 a b a b 2 Adjustment of the upper basket If 27 cm to 31 cm plates are normally used, load them onto the lower basket after the upper basket has been placed in its upper position and proceed as detailed below: 1. Pull out the upper basket; 2. Then grasp the basket from both sides and lift it upwards (fig.
12 LOADING DISHES Using the upper basket ■ The upper basket is provided with mobi- le racks hooked to the sides of the basket which can be regulated in two positions: upright and lowered. In the lowered position the racks may be used for tea and coffee cups, kitchen knives and ladles.
Lower basket (fig. 6) M = 15 soup plates N = 15 dinner plates O = 7 + 7 dessert plates P = serving dish Q = cutlery 14 Upper basket (fig. 5) A = 5 + 5 + 5 glasses B = 12 + 3 saucers C = 5 + 5 + 5 cups.
17 FULL EMPTY dark light Filling the rinse aid container The rinse aid, which is automatically released during the last rinsing cycle, helps the dishes to dry quickly and prevents spots and stains forming. The rinse aid container can be found to the left of the detergent container (fig.
19 PRA TICAL HINTS How to get really good wash results ■ Before placing the dishes in the dishwasher , remove any remaining food (bones, shells, pieces of meat or vegetables, coffee grounds, skin of fruit, cigarette ash, tooth picks etc. to avoid blocking the filters, water outlet and washing arm nozzles.
20 WHEN CYCLE IS FINISHED After every wash it is essential to turn off water supply and to switch off the machine by pressing the On/Off button to the of f position. If the machine is not going to be used for some time, it is advisable to follow these rules: 1.
23 PROGRAM SELECTION AND SPECIAL FUNCTIONS (Use in conjunction with programme guide) Program settings ■ Open the door and place dirty dishes inside the appliance. ■ Press the "ON/OFF" button . ■ After pressing the "ON/OFF" button.
25 At the end of the last 3 hours (at the end of countdown) the 3h LED will stop blinking and remain on to indicate the washing phase and the program will start automatically .
27 26 5 • • • • •• • • •• • • • •• 50°C 29 • • • • 65°C 100 • • YES 75°C 125 • • • • •• • • 45°C 150 • • • • • YES • • • .
29 N.B.: Should any of the situations occur and should the machine give a bad wash performance, it is necessary to remove the deposits from the dishes by hand since the final drying cycle hardens the deposits which a second wash in the machine would not be able to remove.
The manufacturer declines all responsibility in the event of any printing mistakes in this booklet. The manufacturer also reserves the right to make appropriate modifications to its products without changing the essential characteristics. Hoover guarantees all parts of this product for 5 years fr om the date of purchase.
04.05- 4101 1727 - Printed in Italy - Imprimé en Italie EN 08705-400600 HOOVER SER VICE FOR YOUR LOCAL ENGINEER PLEASE CALL OUR NA TIONAL NUMBER Areas covered by HOOVER SERVICE DEALERS Also Channel I.
An important point after buying a device Hoover HND 615 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover HND 615 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover HND 615 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover HND 615 you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover HND 615 will certainly help you make a decision on the purchase.
If you already are a holder of Hoover HND 615, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover HND 615.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover HND 615. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover HND 615 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
