Instruction/ maintenance manual of the product TE211W Honeywell
Go to page of 9
1 1 Atomic Clock with Wireless Indoor/Outdoor Thermometer USER MANUAL (TE211W).
2 1 INTRODUCTION Thank you for selecting the Honeywell Atomic Clock with Indoor/Outdoor Thermometer. This device includes precise time keeping and temperature monitoring features that you can use from the comfort of your home.
4 3 CH PM M D F C A E G B D H A PRECISE TIME WITH TEMPERATURE IN THREE-LINE LCD DISPLAY View of indoor/outdoor temperature and precise time. B ALARM BUTTON Sets an alarm and allows displaying alarm status. C CHANNEL BUTTON Recalls the different remote sensor reading.
6 5 REMOTE SENSOR F ° C/ ° F SWITCH Selects the temperature display unit in Celsius or Fahrenheit. A LED INDICATOR Flashes once when the remote sensor transmits the reading to the main unit. Flashes twice indicating low battery.
8 7 READING THE KINETIC WAVE DISPLAY The kinetic wave display shows the main unit (receiver) signal reception strength. The unit is in searching mode. Temperature readings are securely registered. No signals. ˚ F 4. Install two “AA” size alkaline batteries (not included) matching to the polarities shown in the battery compartment.
10 9 LOST COMMUNICATIONS If the main unit display for the remote sensor goes blank, press and hold [ ] button for 2 seconds to begin a new signal search. If the signal still isn’t received, please make sure that: 1. The remote sensor is in its proper location.
12 11 SETTING CLOCK MANUALLY TIME ZONE 1. Press MODE to select the time display with weekday. 2. Select the time zone by pressing and holding the “ ” button for 3 seconds. 3. Keep holding until the desired time zone (Pacific, Mountain, Central or Eastern) is selected on the display map.
14 13 SPECIFICATIONS Temperature Measurement Main unit Indoor Temperature Proposed operating range : -5.0 ° C to +50.0 ° C / 23.
16 15 DECLARATION OF CONFORMITY We Name: Hideki Electronics, Inc. Address: 7865 SW Mohawk, Tualatin, OR 97062 Telephone No.: 1-503-612-8395 declare that the product Product No.: TE211W Product Name: Atomic Clock with Wireless Indoor/ Outdoor Thermometer Manufacturer: Hideki Electronics Ltd.
An important point after buying a device Honeywell TE211W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell TE211W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell TE211W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell TE211W you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell TE211W will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell TE211W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell TE211W.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell TE211W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell TE211W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
