Instruction/ maintenance manual of the product programmable thermostat Honeywell
Go to page of 12
Place Bar Code Here 63-2652—01 T7351 Programmable Thermost at FOR CONVENTIONAL/HEAT PUMP SYSTEMS User ’ s Guide 63-2652_A.fm Page 1 M onday, May 10 , 2010 4:21 PM.
63-2652—01 2 FEA TURES • T ypically used in bu ildings (includi ng: rest aurant s, shoppi ng malls, office building s and banks) und er 55,000 square feet. • For single zone rooftop unit s, split systems, heat pumps or hot/chilled water systems.
3 63-2652 —01 SETTINGS Using Thermost at Keys The thermost at keys are used to: • set current time and day , • program times and setpoints for heating and cooling, • override the program temp eratures, • display present setting, • set system a nd fan operation, • perform simple configuration.
63-2652—01 4 Setting System and Fan System default setting is Auto. The fan default is set so the fan operates contin uously during: — Occupied periods, — Heating and cooling equipment stages in Not Occupied and reco very periods. NOTE: Use System and Fan keys to change settings.
5 63-2652 —01 PROGRAMMING The thermostat operates at the Occup ied temperature setting unless the thermostat is programmed. The prog ram has four settings: — Occupied heat.
63-2652—01 6 T able 2. Occupied and Not Occupied Period Start T im es. NOTE: 12:00 PM is n oon, and 12:00 AM is m idnight. Day Occupied Period 1 Not Occupied Period 1 Occupied Period 2 Not Occupi ed Period 2 Monday T uesday Wednesday Thursday Friday Saturday Sunday 63-2652_A.
7 63-2652 —01 Fig. 1. Thermost at key loca tions. When using the keypad to change the day/time: 1. Press Set Day until the current day is displayed. NOTE: Sun = Sunday , Mon = Mon day , T ue = T ues day , Wed = W ednesday , Thu = Thursday , Fri = Friday , Sat = Saturday .
63-2652—01 8 NOTE: T apping Set Time changes the time in one hour increments. 4. Press Run Schedule . Setting Schedule T imes Use the keys in the “Schedule” area of the keypad for this procedure. 1. Press Occupied . NOTE: Anytime a start time is not required, press Clear St art Time .
9 63-2652 —01 7. Repeat steps 2 through 6 for all the days desired. 8. Press Run Schedule . Clearing Program S t art Ti me s 1. Press Occupied or Not Occupied until the start period to be cleared is displayed. 2. Press Day until desired day is displayed.
63-2652—01 10 5. Press Not Occupied Heat . 6. Press up S or down T until the desired temperature is displayed. 7. Press Not Occupied Cool . 8. Press up S or down T until the desired temperature is displayed. 9. Press Run Schedule . T emperature Setpoint Overrides IMPORTANT — Setup determines Occupied override duration.
1 1 63-2652—01 Using T emporary Occupied Override The T emporary Occupied Override can be used when the T7350 is i n Not Occupied or S tandby mode. It switches to t he Occupied mode for a fixed number of hours. 1. T o use the default occupied override, press T emporary Occup ied .
Automation and Co ntrol Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Limited-Honeywell Limitée 35 Dynamic Drive Toronto, Ontario M1V 4Z9 yourhome.honeywell.com ® U.S. Register ed Trad emark © 2010 Honeywell Internationa l Inc.
An important point after buying a device Honeywell programmable thermostat (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell programmable thermostat yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell programmable thermostat - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell programmable thermostat you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell programmable thermostat will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell programmable thermostat, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell programmable thermostat.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell programmable thermostat. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell programmable thermostat along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center