Instruction/ maintenance manual of the product PCR325W Honeywell
Go to page of 11
1 1 Wireless Weather Projection Clock with Light Detector USER MANUAL (PCR325W).
2 1 INTRODUCTION Thank you for selecting the Honeywell Wireless Weather Projection Clock with Light Detector. This device includes precise time keeping, weather forecast, alarm, and temperature monitoring features that you can use from the comfort of your home.
4 3 SIZE AA / UM3 SIZE AA / UM3 M N B A C D F G J K L E / I O H mode channel alarm on/ off LIGHT SENSOR LIGHT SNOOZE CONTINUE PROJECTION AUTO ON OFF LIGHT SENSOR ATOMIC CLOCK PM AM MAX IN M D PM AM PRE-AL s w Z Z CH MIN A LCD DISPLAY Allows easy reading of indoor/ outdoor temperature, weather conditions, and calendar and time.
6 5 THERMO – SENSOR MADE IN CHINA TM 1 2 3 A C B D F E REMOTE SENSOR N [LIGHT SENSOR] SWITCH When AC adapter is connected, position the light sensor switch to: * “AUTO” to activate an auto backlight. * “ON” to set continuous LCD backlight.
8 7 DC 5V BATTERY INSTALLATION MAIN UNIT 1. Open the battery compartment door. 2. Install two AA batteries (not included) matching to the polarities shown.
10 9 CURRENT TIME AND INDOOR/OUTDOOR TEMPERATURE PROJECTION 3. Press and hold the “ FLIP ” button for 2 seconds again, and the display will switch between indoor and outdoor temperatures every 5 seconds. READING THE KINETIC WAVE DISPLAY The kinetic wave display shows the main unit (receiver) signal reception strength.
12 11 * Within concrete wall rooms such as basements or office buildings, the received signal may be weakened. Always place the unit near the window. WEATHER FORECAST The weather projection clock is capable to detect an atmospheric pressure changes.
14 13 If everything listed above in order and there is no reception anyway, please perform the following steps: 1. Bring main unit and remote sensor close together. 2. Remove 4 small screws from the back of the remote sensor and open the battery compartment.
16 15 “ ” (Weekday alarm), “ ” (Single day alarm), and “Pre-AL” (Pre-alarm) icons will indicate which alarm mode is armed. You can enable or disable an alarm by pressing the [ + ],[ – ] buttons in alarm display mode. Press MODE to toggle between alarm modes or to return to the default display.
18 17 SPECIFICATIONS Temperature Measurement Main unit Indoor Temperature Proposed operating range : -5 ° C to +50 ° C / 23 ° F to 122 ° F Temperature resolution : 0.
20 19 DECLARATION OF CONFORMITY We Name: Hideki Electronics, Inc. Address: 7865 SW Mohawk, Tualatin, OR 97062 Telephone No.: 1-503-612-8395 declare that the product Product No.: PCR325W Product Name: Wireless Weather Projection Clock with Light Detector Manufacturer: Hideki Electronics Ltd.
An important point after buying a device Honeywell PCR325W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell PCR325W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell PCR325W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell PCR325W you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell PCR325W will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell PCR325W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell PCR325W.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell PCR325W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell PCR325W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
