Instruction/ maintenance manual of the product PCR11ELW Honeywell
Go to page of 9
Atomic Projection Clock with Temperature (PCR11ELW) USER MANUAL INTRODUCTION Thank you for selecting the Honeywell Atomic Projection Clock with Temperature. This device includes precise time keeping, alarm, moonphase, temperature monitoring and projection features that you can use from the comfort of your home.
Battery cover SNOOZE/ Backlight/ Projection Light key + / — key MODE key Rotate key Flip key Focus key Projector Lens Adjustable projector Adapter socket ALARM 2 ALARM 1 RO TATE FOCUS FLIP DC 3V CON.
1 2 3 4 DISPLAYING PROJECTED INFORMATION CONTINUOUSLY Connect AC/DC adapter as shown below. Battery cover Battery compartment Please make sure your household voltage matches the voltage supported by the adapter, or it will damage your clock and adapter.
GETTING STARTED * After batteries are installed, the WWVB time signal receiver will automatically search for the time signal. This will take about 5 – 8 minutes.
SETTING TIME AND DATE MANUALLY The time piece date and time can be set by pressing and holding the MODE buttons for 3 seconds in Time/Temperature display with the atomic time receiver disabled. To disable atomic time receiver, press and hold [ — ] key until the atomic reception icon will appear from the display.
ALARM 2 setting -In the ALARM 2 Display, *Press and hold SET 2 for about 3 seconds: the alarm hour digits will flash and alarm hour can be set by pressing UP [+] or DOWN [–] key. *Press SET 2 again: the alarm minute digits will flash and minute can be set by pressing UP [+] or DOWN [–] key.
Time Zone setting * Press and hold UP (+) key for 3 seconds, to select the corresponding time zone. * Keep holding the UP (+) button to switch to the time zone in the following sequence: Pacific time Mountain time Central time Eastern time.
5. Only use fresh batteries as specified in the user’s manual. Do not mix new and old batteries as the old ones may leak. Always replace both batteries at the same time. 6. Always read the user’s manual thoroughly before operating the unit.
STANDARD WARRANTY INFORMATION This product is warranted from the manufacturing defects for one year from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and repair.
An important point after buying a device Honeywell PCR11ELW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell PCR11ELW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell PCR11ELW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell PCR11ELW you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell PCR11ELW will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell PCR11ELW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell PCR11ELW.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell PCR11ELW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell PCR11ELW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
