Instruction/ maintenance manual of the product HWC-BELT-WEH-QS Honeywell
Go to page of 13
Belt Mount Sled Wearable Solution for Dolphin 70e Black Quick Start Guide HWC-BELT-WEH-QS Rev A 12/14 Aller à www.honeywellaidc.com pour le français. Vai a www.honeywellaidc.com per l'italiano. Gehe zu www.honeywellaidc.com für Deutsch. Ir a www.
Important Information About this Guide The Belt Mounted Sled is a device that is used with the wearable version of the Dolphin 70e Black (Honeywell Wearable Solution). For information a bout the Dolphin 70e Black, refer to the quick start packaged with the terminal.
Getting to Know the Bel t Mount Sled The sled encases theDolphin 70e Blac k including the touch panel and helps protect the terminal from impacts. Dolphin 70e Blac k Features Not Used When the Dolphin.
Removin g the Dolphin Black fr om the Sled 1. If the audio end cap is used, remove the audio cable. To prevent damage to the Dolphin 70e Black always unplug the audio cable before removing the end cap. 2. Slide the lock down to release the end cap. 3.
Removing the Battery 1. Remove the Dolphin 70e Black from the sled before changing the bat- tery. 2. Place the terminal in Suspend mode by p ressing and releasing the Power button . 3. Perform the steps illustrated below to remove the battery. 5. Slide the Dolphin 70e Black out of the sled.
Installing the Battery The Dolphin 70e Black mo del designed fo r use with the wearable sled uses battery part numbers BAT-STANDARD-02 (Li-ion 3.7 V, 6.179 watt hour) and BAT-EXTENDED-02 (Li-ion 3.7 V, 12.358 watt hour) manufactured for Honeywell International Inc.
T urning P ower On To turn the terminal On , press and release the Power button . Suspend Mode Press and release the Power button to toggle the terminal in or out of Suspend Mode. Because the display is hidden in the belt mount sled, observe the backlights for the Send, Home, Back and End keys.
5. If the scan wedge icon is displayed, scan wedge is running. If the scan wedge icon is not displayed, Touch > Power Tools > ScanWedg e NGW . Tap Yes if a message is displayed about contin uing without a tethered scanner connected. Placing Dolphin 70e Blac k into the Sled 1.
3. Pull the end cap off the sled. 4. Make sure the USB door is closed. Rotate the door on the right side of the Dolphin 70e Black to close. 5. Press until the door is flush with the side of the terminal.
7. Make sure audio jack door is open. Pull the rubber door out and rotate the door 180º a s shown to prevent damage. 8. Make sure the audio cable is not installed in the end cap. 9. Slide the end cap straight onto the sled until it clicks in place. 10.
Attaching the Headset 1. Make sure the audio jack door is open as shown in the previous section. 2. Slide the 3.5mm audio connector into the end cap. 3. Attach the quick disconnect end of the headset adapter cable to the headset’s cable. 4. Slide the cable ends together until they click.
Attach the Sled to the Belt Clip 1. Align the sled assembly with the belt clip and press on the sled until it latches onto the belt clip. Be sure to align tabs on the back of sled with the notches on the belt clip. 2. Slide the clip over a belt to wear the assembly.
T echnical Assistance Contact information for technical suppor t, product service, an d repair can be found at www.honeywellaidc.com . User Documentation For localized versions of this document, and to download the U ser’s Guide, go to www.honeywellaidc.
An important point after buying a device Honeywell HWC-BELT-WEH-QS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell HWC-BELT-WEH-QS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell HWC-BELT-WEH-QS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell HWC-BELT-WEH-QS you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell HWC-BELT-WEH-QS will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell HWC-BELT-WEH-QS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell HWC-BELT-WEH-QS.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell HWC-BELT-WEH-QS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell HWC-BELT-WEH-QS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
