Instruction/ maintenance manual of the product HPA050 Honeywell
Go to page of 6
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS AIR PURIFIER When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1.
Control Panel HPA-150 Type True HEPA Filters (2) Type Odor Absorbing Pre-filter Rear Grille YOUR AIR PURIFIER HOW YOUR AIR PURIFIER WORKS This model air purifier incorporates a 2-stage cleaning system to help clean the air that passes through the filter in the unit (Fig.
SET-UP • Select a firm, level and flat location. For best airflow, locate the unit at least 3 feet (1 M) from any wall or furniture. • When operating, large volumes of air are drawn toward the air purifier. Surrounding areas should be cleaned and/or vacuumed frequently to prevent build-up of dust and other contaminates.
These air purifier models each have two electronic filter checks to remind you when to check and replace the True-HEPA filters and the Odor Absorbing pre-filters based on the air cleaner’s hours of use. When the True-HEPA filter(s) need to be replaced, the light below “HEPA filter” will remain on until it is RESET.
ACCESSORIES AND REPLACEMENT FILTERS If you would like your air purifier to remain effective at reducing household odors, and to operate most effectively, you should continue to replace the odor absorbing pre-filters. This pre-filter is available as the Premium odor absorbing pre-filter or model HRF-B1(single pack) or HRF-B2 (2 pack).
You should first read all instructions before attempting to use this product. A . This 5 year limited warranty applies to repair or replacement of product found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage.
An important point after buying a device Honeywell HPA050 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell HPA050 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell HPA050 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell HPA050 you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell HPA050 will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell HPA050, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell HPA050.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell HPA050. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell HPA050 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
