Instruction/ maintenance manual of the product HMLCD15 Honeywell
Go to page of 16
Video Systems www.honeywellvideo.com 1-800-796-CCTV © 2004 Honeywell Internatio nal Inc. All rights reserved. No part of this publicatio n may be reproduced by any means without written pe rmission from Honeywell Video Systems. The information in this public ation is believed to be accurat e in all respects.
Rev. A ii HMMU000880 04/08/04 ISSUE DATE REVISIONS A April 2004 Initial Release (PCN 1630) Rev. A 21 HMMU000880 04/08/04 SECTION 5: SPECIFICATIONS Type TFT Color XGA LCD Screen Size 15” (diagonal) Signal RGB Analog PC Input Type 15-Pin D-Sub H-Freq 31.
Rev. A 20 HMMU000880 04/08/04 4.4 LIMITED WARRANTY Honeywell International Inc. ("Seller"), 1305 Wa ters Ridge Drive, Lewisville, TX 7 5057, warrants this monitor to be in conformance with i.
Rev. A iv HMMU000880 04/08/04 EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with ar rowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Rev. A 18 HMMU000880 04/08/04 NOTES: Rev. A v HMMU000880 04/08/04 WARNINGS Installation and servicing should be performed only by qualified and experienced personnel. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. SAFEGUARDS This product is made with consideration of the maximum s afety of users.
Rev. A vi HMMU000880 04/08/04 SAFEGUARDS, CONTINUED 2. Do not place candlelight, mosquito coils, or cigarettes on top of the monitor or install it close to heatin g appliances.
Rev. A 16 HMMU000880 04/08/04 3.3 ON-SCREEN DISPLAY (OSD) CONTROL PROCEDURE, CONTINUED Using HOTKEY Frequent adjustments such as au to-geometry, Brightness, Contrast, Audio-volume, Audio-Mu te, and Source (selected in RGB/VIDEO) can be quickly done without calli ng the MENU.
Rev. A viii HMMU000880 04/08/04 PURCHASE INFORMATION Date Purchased: Serial Number: Location Installed : Rev. A 15 HMMU000880 04/08/04 3.3 ON-SCREEN DISPLAY (OSD) CONTROL PROCEDURE, CONTINUED OSD Menu Description Horizontal Position Select OSD Menu horizontal position.
Rev. A 14 HMMU000880 04/08/04 3.3 ON-SCREEN DISPLAY (OSD) CONTROL PROCEDURE, CONTINUED OSD Menu Description The following table describe s the OSD menu and a description of each option. OSD Menu Description Auto adjustment Automatically adjusts the Horizontal position, Vertical position, hor izontal size and Phase.
Rev. A x HMMU000880 04/08/04 TABLE OF CONTENTS, CONTINUED SECTION 4: TROUBLESHOOT ING AND MAINTENANCE ................. 19 4.1 TROUBLESHOOTING ................................................................ 19 No Power ...............................
Rev. A 12 HMMU000880 04/08/04 3.2 PRESET MODE CHART, CONTINUED The monitor is compatible with additional modes within one of the following specified frequenc y ranges, provided they are different at least for one of the following: Horizontal Frequency: ± 1 KHz Vertical Frequency: ± 1 Hz 3.
Rev. A 2 HMMU000880 04/08/04 1.3 TFT LCD PANEL Black spots (pixels th at do not light) or luminescent spots (pixel s that are always lit) may ap pear on the screen because of the intrinsic characteristics of TFT LC D technology. This is neither a malfunctio n nor a defect in the mo nitor.
Rev. A 10 HMMU000880 04/08/04 3.2 PRESET MODE CHART Timing Charts The monitor shall be capable of supporting the following video timings: VI DE O SYNC Sy nch Wi dth (T 2) (T3 ) Ba ck Po ac h (T1) Period (T4) Ac tive (T5) Fr ont Poach Input Timing Limits H-Sync Pulse Width 1.
Rev. A 4 HMMU000880 04/08/04 NOTES: Rev. A 9 HMMU000880 04/08/04 SECTION 3: OPERATION 3.1 POWER MANAGE MENT This monitor is equipped with DPMS (Display Power Management Signaling) function whi ch automatically switches to power saving mode (less th an 5 watts consumed) when the computer is left unattended.
Rev. A 8 HMMU000880 04/08/04 NOTES: Rev. A 5 HMMU000880 04/08/04 SECTION 2: CONTROLS AND CONNECTIONS 2.1 CONTROLS – FRONT PANEL A B D E F C K J I H G A AV1 F AUTO/EXIT B PC LAMP G BRT Y C SOURCE Y H.
Rev. A 6 HMMU000880 04/08/04 2.2 CONTROLS – REAR PANEL PC A B C D E F G DVR o r V CR A DC12V B Ear C PC Sound D VGA E Video Sound F S-VHS G Composite AV1 Rev. A 7 HMMU000880 04/08/04 2.3 INSTALLING THE MONITOR DRIVER You can achieve an optim al resolution and scanning rate by installing the monitor driver as follo ws: 1.
An important point after buying a device Honeywell HMLCD15 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell HMLCD15 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell HMLCD15 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell HMLCD15 you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell HMLCD15 will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell HMLCD15, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell HMLCD15.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell HMLCD15. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell HMLCD15 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
