Instruction/ maintenance manual of the product GS9590 Honeywell
Go to page of 16
Voyager 9520/40 Voyager GS9590 Eclipse 5145 Quick Start Guide VG-ECL-QS Rev C 6/12 Aller à www.honeywellaidc.com pour le français. Vai a www.honeywellaidc.com per l'italiano. Gehe zu www.honeywellaidc.com für Deutsch. Ir a www.honeywellaidc.com para español.
Getting Started Turn off the computer’s power be fore connecting the scanner, then power up the computer once th e scanner is fully connected. Connecting the Scanner USB: Serial (RS232): Keyb oa rd .
Reading T echniques Recall Defaults Scan Enable Factory Defaults , then Recall Defaults to reset all standard product default settings. Interface Selections USB ³ 999998 Recall Defaults ³ 846600 Ena.
Ke yboard W edge Ke yboard Country Scan a bar code to select one of the following keyboard country templates. Refer to your Config uration Guide for additional keyboard country settings.
AL T Mode If your bar code contains special characters from the extended ASCII chart, for example, an e with an accent grave (è), scan the ALT Mode On bar code. The data is then output with the special character(s). Note: Scan ALT mode after scan ning the appropriate Keyboard Country code.
Prefix Scan one of the following bar codes to program your scanner to add or remove a start of text character, or AIM, NCR, or Nixdorf identification characters before each bar code.
Suffix Scan one of the following bar codes to program your scanner to add or remove a carriage return, line feed , tab, or end of text after each bar code.
User Configurable Prefix/Suffix One or two prefix or suffix charac ters can be added and assigned for data transmission. Use one of th e codes below with a 3 code byte sequence that represents the desired character ( see ASCII Conversion Chart , end of document) for your prefix or suffix.
Supplements Scan one of the bar codes below to program your scanner for 2 or 5 digit bar code supplements. 977 (2 Digit) Supplement Required: Turn on this feature when a 2 digit supplement is re quired for EAN-13 codes that begin with 977.
UPC/EAN Formatting Scan Convert UPC-A to EAN-13 and a leading zero is transmitted before a UPC-A bar code to convert it to EAN-13. Scan Transmit Lead Zero on UPC-E to transmit a zero before each UPC-E bar code. Scan Transmit UPC-A Number System to transmit the UPC-A leading digit with the bar code data.
Expand UPC-E to 12 Digits ex pands the UPC-E code to the 12 digit, UPC-A f or mat. When Code 39 Full ASCII On is scanned, cer tain character pairs within the bar code symbol will be inter preted as a single character . F or example: $V will be decoded as the ASCII character SYN, and / C will be decoded as the ASCII character #.
Check Digits The following selections allow you to specify whether the check digit should be transmitted at the end of the scanned UPC-A or UPC-E data or not. CodeGate/Manual Activ ation (V oy ager 9520/40, V oy agerGS 9590) Use the following programming code s to control CodeGate button/ trigger functions.
Host Configurations Scan one of the following codes, then scan the Recall Defaults code, to program the scanner for on e of the following configurations. Miscellaneous Minimum Symbol Length specifies the minimum number of characters allowable for non-UP C/EAN bar codes.
Code Bytes ³0 ³1 ³3 ³5 ³2 ³4 ³6 ³7 ³9 ³8.
ASCII Con version Char t Dec Hex Char Dec Hex Char Dec Hex Char Dec Hex Char Dec Hex Char 0 00 NUL 26 1A SUB 52 34 4 78 4E N 104 68 h 1 01 SOH 27 1B ESC 53 35 5 79 4F O 105 69 i 2 02 STX 28 1C FS 54 3.
T echnical Assistance Contact information for technical support, product service, and repair can be found at www.honeywellaidc.com . Limited W arranty Refer to www.
An important point after buying a device Honeywell GS9590 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell GS9590 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell GS9590 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell GS9590 you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell GS9590 will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell GS9590, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell GS9590.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell GS9590. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell GS9590 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
