Instruction/ maintenance manual of the product 5X80 Honeywell
Go to page of 2
W arning for N56XXX-XXX-XX5 engine only: Connecting powe r to both the micro-B connector and the 10 pin RJ45 connector simultaneously could dama ge the PC and/or the engine. 4. Turn the PC back on. The engine beeps. RS232 Connection 1. Turn off power to the PC.
5. Scan the RS 232 interf ace bar code below. This programs the development engine for an RS 232 interface at 115,200 bau d, parity–none, 8 data bits, 1 stop bit, and adds a CR LF suffix. User Documentation Refer to www.honeywellaidc.com for detailed user documentation about installi ng and configuring image engines.
An important point after buying a device Honeywell 5X80 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell 5X80 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell 5X80 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell 5X80 you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell 5X80 will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell 5X80, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell 5X80.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell 5X80. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell 5X80 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
