Instruction/ maintenance manual of the product 5878 Honeywell
Go to page of 2
K14347 6/06 Rev. A - 5878 Wireless Wall Trans mitter INSTALLATI ON AND SETUP G UIDE GENERAL INFORMATION The 5878 is a six-button, eight-loop, wall m ountable wirele ss transmitter. It is intended for use only with wireless alarm systems that suppor t 5800 series re ceivers.
USING TWO RECEIVERS IN HIGH-SECURITY M ODE If the control supp orts two receivers and you plan to use them in the hi gh-secu rity mod e perform the f ollowin g: 1. Enroll the transm itters into the rece ivers one at a tim e, by disconnecting Re ceiver #2, and en rolling as described in “Activating High S ecurity Mode” (above).
An important point after buying a device Honeywell 5878 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell 5878 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell 5878 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell 5878 you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell 5878 will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell 5878, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell 5878.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell 5878. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell 5878 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
