Instruction/ maintenance manual of the product H1000 Honda Automobiles
Go to page of 20
!I.
.
a 0 The information in this operator’s manual is limited in application to Honda mulching kits for Honda 1000 and H3000 Series riding mowers. Before installing or operating this equipment, read this manual nd the owner’s manual supplied with the Honda riding mower.
.
1. DEALER INSTALLATION INSTRUCTIONS The installation of this kit must be performed by an authorized Honda riding mower dealer. These instructions are provided for dealer use. FOLLOW THESE INSTRUCTIONS CAREFULLY. Proper installation of this kit is essential for safe, reliable operation.
1. DEALER INSTALLATION INSTRUCTIONS MULCHING KIT CONTENTS Mulching Blade Swirl Guide A Swirl Guide B Cover Plate 6x40mm Flange Bolts (2) 6x55mm Flange Bolt (1) 8x35mm Flange Bolts (2) 6 mm Flat Washer.
1. DEALER INSTALLATION INSTRUCTIONS 3. Temporarily install the cover plate on the mower deck, using two 8 mm lock nuts. A- COVER PLATE 4. Hold swirl guide B against the cover plate. Insert a pencil through the holes in swirl guide B to mark drilling points on the cover plate.
1. DEALER INSTALLATION INSTRUCTIONS 7. Install a 6 x 40 mm flange bolt, 6 mm washers, and a 6 mm lock nut in the first hole, as shown. Tighten the 6 mm nut and bolt to a torque value of 7.
1. DEALER INSTALLATION INSTRUCTIONS 12. Install the mulching blade, using the original blade holder and hardware. Be sure the blade is positioned right side up (outer edges turn toward the mower deck). If the blade is installed upside down, it cannot cut properly.
2. SAFETY SAFETY LABEL LOCATIONS (H3000 SERIES) Read all safety instructions before operating the riding mower. w AVOID BURNS I / I PREVENT BRAKE FAILURE I DISENGAGE PARKING BRAKE WHEN BUZZER SOUNDS CONTINUOUSLY A DELAYED ENGINE CUTOFF WILL STOP THE ENGINE IF PARKING BRAKE IS NOT RELEASED.
2. SAFETY SAFETY LABEL LOCATIONS (H1000 SERIES) Read all safety instructions before operating the riding mower. rn Improperly driving on slopes or uneven terrain can cause the mower to tip over and u can be seriously hurt or killed. Read 'Sar Mowing Practices in the Owner's Manual carefully.
3. MOWING AND MULCHING RECOMMENDATIONS GRASS CUlTlNG BASICS Cutting Height A cutting height setting of 1 - 1/2 or 2 inches is appropriate for most lawns during cool weather.
3. MOWING AND MULCHING MULCHING Mulching cuts grass clippings and fallen leaves into fine particles that fall through the turf and decompose quickly. This returns nutrients to the soil and reduces'the need for raking, bagging, and disposal. For best mulching results, mow the lawn frequently, cutting off less than one inch of grass each time.
3. MOWING AND MULCHING RECOMMENDATIONS SIDE - DISCHARGE MOWING Side - discharge mowing should be considered where grass has grown too tall to mulch easily. Side - discharge mowing will leave grass clippings on top of the mowed areas and may need to be removed by raking.
3. MOWING AND MULCHING ~~ ~ BAGGING Bagging should be considered for areas where you want the lawn to be clear of loose particles, such as around swimming pools, and for less frequently mowed areas, where grass has grown too tall to mulch easily.
1 3. MOWING AND MULCHING RECOMMENDATIONS 5. Install the bag support assembly on the left and right struts, while inserting the center strut pin in the the hitch plate hole. 6. Grasp the upper chute by the chute handle. Raise the upper and middle chutes, then slide the middle chute over the lower chute.
4. PARTS LIST MULCHING KIT: Part Number 06764 - 763 - ROO 8 mm MULCHING BLADE LOCK NUT (4) 72511 - 763 - RW SWIRL GUIDE A 901 15-659-003 8 mm FLAT COVER PLATE 76264 - 763 - MOO SWIRL GUIDE B 76268-763.
5. WARRANTY SERVICE OWNER SATISFACTION Your satisfaction and good will are important to your dealer and to us. All Honda warranty details are explained in the Distributor’s Limited Warranty. Normally any problems concerning the product will be handled by your dealer’s service department.
.
t.-.
An important point after buying a device Honda Automobiles H1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honda Automobiles H1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honda Automobiles H1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honda Automobiles H1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Honda Automobiles H1000 will certainly help you make a decision on the purchase.
If you already are a holder of Honda Automobiles H1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honda Automobiles H1000.
However, one of the most important roles played by the user manual is to help in solving problems with Honda Automobiles H1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honda Automobiles H1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
