Instruction/ maintenance manual of the product 08V03-S9A-100B Honda
Go to page of 10
© 2005 American Honda Motor Co., Inc. - All Rights Reserved. AII 30556 (0509) 1 of 10 INSTALLATION INSTRUCTIONS Accessory Application Publications No.
2 of 10 AII 30556 (0509) © 2005 American Honda Motor Co., Inc. - All Rights Reserved. 3. Remove the lens from the roof console (four retaining tabs). 4. Remove the roof console (four screws, and unplug one connector). 6. Remove the sunvisor holders. Turn the holder 90°, then pull it out.
© 2005 American Honda Motor Co., Inc. - All Rights Reserved. AII 30556 (0509) 3 of 10 7. Remove the cap from the right sunvisor (four retaining tabs). 8. Remove the right sunvisor (two T25 Torx screws). 9. Remove the door opening weatherstrip from the right front pillar in the area shown.
4 of 10 AII 30556 (0509) © 2005 American Honda Motor Co., Inc. - All Rights Reserved. 13. Remove the right kick panel (pull to release the two clips). CLIP RIGHT KICK PANEL TAB TAB 14. Turn the knob clockwise, and remove the driver’s dashboard under cover (one clip).
© 2005 American Honda Motor Co., Inc. - All Rights Reserved. AII 30556 (0509) 5 of 10 1 7. Remove two self-tapping screws that fasten the heater A/C control panel to the dashboard. Pull the heater A/C control panel out toward you to release the four clips.
6 of 10 AII 30556 (0509) © 2005 American Honda Motor Co., Inc. - All Rights Reserved. 2 4. Plug the mirror harness 7-pin connector into the rear of the mirror, then route the 4-pin connector up and out through the console opening in the roof lining as shown.
© 2005 American Honda Motor Co., Inc. - All Rights Reserved. AII 30556 (0509) 7 of 10 2 5. Route the mirror harness through the grooves of the upper and lower covers. Attach the lower cover to the stay of the mirror. 2 6. Slide the upper cover up and under the roof lining as shown.
8 of 10 AII 30556 (0509) © 2005 American Honda Motor Co., Inc. - All Rights Reserved. 31 . Route the day/night mirror harness 4-pin connector with fuse case upwards to the vehicle harness, and then along the vehicle harness to the fuse box through the dashboard pocket opening.
© 2005 American Honda Motor Co., Inc. - All Rights Reserved. AII 30556 (0509) 9 of 10 4202010 H DAY/NIGHT MIRROR HARNESS 4-PIN CONNECTOR INSTRUMENT PANEL DAY/NIGHT MIRROR HARNESS 4-PIN CONNECTOR ELECTRICAL TAPE PIECE OF STEEL WIRE RIGHT FRONT PILLAR 35.
10 of 10 AII 30556 (0509) © 2005 American Honda Motor Co., Inc. - All Rights Reserved. 44 . Under the dashboard, secure the day/night mirror harness to the vehicle harness with three wire ties. 45. Check that all wire harnesses are routed properly and all connectors are plugged in.
An important point after buying a device Honda 08V03-S9A-100B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honda 08V03-S9A-100B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honda 08V03-S9A-100B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honda 08V03-S9A-100B you will learn all the available features of the product, as well as information on its operation. The information that you get Honda 08V03-S9A-100B will certainly help you make a decision on the purchase.
If you already are a holder of Honda 08V03-S9A-100B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honda 08V03-S9A-100B.
However, one of the most important roles played by the user manual is to help in solving problems with Honda 08V03-S9A-100B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honda 08V03-S9A-100B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
