Instruction/ maintenance manual of the product 08B26-S9V-100 Honda
Go to page of 8
© 2002 American Honda Motor Co., Inc - All Rights Reserved. All 23607 (0205) 1 of 8 08B26-S9V -1000-91 P ARTS LIST CD Changer Attachment Kit (sold separately): P/N 08B26-S9V -100 Right base bracket L.
2 of 8 All 23607 (0205) © 2002 American Honda Motor Co., Inc - All Rights Reserved. With Navigation Unit: • Remove the driver’s and passenger’s center console trim pieces (three clips each).
© 2002 American Honda Motor Co., Inc - All Rights Reserved. All 23607 (0205) 3 of 8 4. On the driver’s side of the vehicle, gently pull the center console lower cover out toward you to release the seven clips and remove the center console lower cover.
4 of 8 All 23607 (0205) © 2002 American Honda Motor Co., Inc - All Rights Reserved. With Navigation Unit: • Route the BUS cable from the dashboard opening to the driver ’ s floor . Pull out the end of BUS cable 30 mm from the end of the vehicle 20-pin connector , and secure the BUS cable to the vehicle harness with wire ties.
© 2002 American Honda Motor Co., Inc - All Rights Reserved. All 23607 (0205) 5 of 8 Installing the CD Changer 1 1. Carefully unpack the CD changer. Remove the three shipping clips, and discard the shipping cover . Install an adhesive seal (included with the CD changer kit) over each of the three clips holes.
6 of 8 All 23607 (0205) © 2002 American Honda Motor Co., Inc - All Rights Reserved. 1 5. Attach one cushion tape to the rear of the CD changer leaving half of the cushion tape extended past the CD changer. Using scissors, cut the cushion at the end of the CD changer .
© 2002 American Honda Motor Co., Inc - All Rights Reserved. All 23607 (0205) 7 of 8 With CD/Cassette Tuner: (With Navigation Unit) With Cassette Player: 19. At the dashboard area, plug the BUS cable 14-pin connector , the vehicle connectors, and the antenna lead into the rear of the audio unit.
8 of 8 All 23607 (0205) © 2002 American Honda Motor Co., Inc - All Rights Reserved. 2 1. Check that all wire harnesses are routed properly and all connectors are plugged in. 2 2. Reinstall all removed parts. 2 3 . Place shipping clips in a plastic bag and put the bag in the glove box.
An important point after buying a device Honda 08B26-S9V-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honda 08B26-S9V-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honda 08B26-S9V-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honda 08B26-S9V-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Honda 08B26-S9V-100 will certainly help you make a decision on the purchase.
If you already are a holder of Honda 08B26-S9V-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honda 08B26-S9V-100.
However, one of the most important roles played by the user manual is to help in solving problems with Honda 08B26-S9V-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honda 08B26-S9V-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
