Instruction/ maintenance manual of the product BP250 Hobie
Go to page of 12
• 1 ASSEMBL Y MANUAL HOBIE CAT EUROPE ZI Toulon Est, BP 250 83078 Toulon cedex 9, France Tel : +33 (0)494 08 78 78 - Fax : +33 (0)494 08 13 99 Email : hobie.
• 2 ASSEMBL Y MANUAL TABLE OF CONTENT Hull assembly ................................. ........... 3 Trampol i ne fi tt i ng ................................. ..... 4 Rudder system assembly ......................... 5 Mast a nd ri gging .............
• 3 Lift the front crossbar and inse rt the left end into the left hull. Lift the rear crossbar and inse rt the left end into the left hull. NB : The crossbars have stops built into the un- derside that will limit the depth the crossbars can be in- serted.
• 4 NB : A tight t rampoline gives the boat its rig idity. TRAMPOLINE Trampoline fittings Proceed to lace the trampolin e halves along the rear first. Do not tighten. Tighten the trampolin e lacing s and attach them as in- dicated on the picture . 1 Thread and tighten the center trampoline lacin g from front to re ar .
• 5 Locate the tille r crossbar and identify the left and right hand ends. NB: the tiller crossbar (1) locates on top of the tiller/rudder arms (2). Locate the tille r connector kits and install as shown on the pho- tographs. Identify the right and the left rudders.
• 6 Remove the main and jib halyard lines from the ro pes bags. Unroll th e main halyard w i re that is secured at the head of the mast. Using a bo wlin e knot, secure the main halyard line to the thimble at the end of the halyard wire. Now, secure both en ds at the base o f the mast.
• 7 With the person on the trampo line supporting the mast , the other person shackle the two brid les to the stay ad juster at the end of the fore sta y. Now, provided all the clevis pins have the split rings fitted, th e mast is supported by the shrouds and fore stay.
• 8 Unfold the mainsail and lay on a flat clean surface. Undo th e set of batt ens and iden tify which batten g oes in which batten pocket . Inse rt the battens into the pockets. Using the batten ties sec ure each batt en into it’s respe ctive pocket (as per draw ing).
• 9 These pictures show how the mainsheet system is assembled and shackled to the travelle r car and the clew of the mainsail. 1 2 MAINSHEE T 3.
• 10 Before installing the jib on the Hobie Wave, you must first install the parallel bow spreader (provided with the turbo kit). Install bow spreader tangs on each bo w un de r ex is- ting bridle wire tang as shown. Pin faces towards center. With trampoline loosened, place bo w spreader in position on pins ins- talled on bows.
• 11 RIGHTI NG LINE Take the righting lin e from the rope bag and attach it to the fr ont crossbar as indi- cated on the picture. Store the excess line in the trampoline pocket.
• 12 CAUTION / SAFETY TIPS A LIRE A V ANT DE P ARTIR Safety tips/Sécurité ♦ Whether on land or on the water, wat c h f o r overhead power lines .
An important point after buying a device Hobie BP250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobie BP250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobie BP250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobie BP250 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobie BP250 will certainly help you make a decision on the purchase.
If you already are a holder of Hobie BP250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobie BP250.
However, one of the most important roles played by the user manual is to help in solving problems with Hobie BP250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobie BP250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
