Instruction/ maintenance manual of the product 60 Hobie
Go to page of 12
FLOAT CAT 60 ASSEMBLY AND OPERATIONS MANUAL WARNING Read Operations Guidelines before using. Always wear USCG approved floatation devices. Always wear wader safety belt. Always attach tether while operating. Do not operate in rapids. Do not operate in high wind conditions.
HOBIE FLOAT CAT OWNER’S MANUAL Congratulations on your purchase of a Hobie Outback Float Cat! The Hobie reputation for exceptional design, high quality materials, and professional service will ensure you years of pleasure. The Float Cat was designed to enhance your fishing experience.
INDEX Page Float Cat Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Rod Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Rod Holder .
FLOAT CAT 60/75 PARTS LIST ITEM DESCRIPTION (1) Two pontoons (2) Two black plastic vent caps (3) Two aluminum crossbars with snap buttons (4) One plastic molded seat back (5) Two 10” aluminum seat p.
STEP 2- Vent Caps Installing vent caps (2) as supplied creates a water and air tight seal. Screw caps onto threaded holes on top of pontoons. Caps can be installed to self vent for altitude and temperature changes. To self vent, remove the clear plastic cone inside each cap by prying out with a small screwdriver.
STEP 7- Seat Bottom Lacing Locate the two short and one long black lacings (Item 9). Flip pontoons over, vent caps facing down. Using the two short lacings, tie a double half hitch at each outer grommet of the short flap. Pass lacing over crossbar and up through opposite outside grommet located on the long flap.
Trouble Shooting Snap Button It is possible for snap buttons to get stuck inside the crossbars. This usually occurs because a tool smaller than 3/8" diameter has been used. When pushing snap button down, always use a tool with at least a 3/8" diameter (or your finger).
Tether: Always use a tether so your Float Cat will not drift away from you. All it takes is a light breeze. Secure tether to your calf just below the knee. Exit: To exit, position your Float Cat into shallow water. Reach down to tops of apron support posts and tilt post in same direction, pushing ring to one side while pulling upward.
Entering Your Float Cat 1. Make sure your Float Cat has been assembled properly and double check all connections to assure they are locked in properly for initial assembly, see assembly instructions. 2. Carry Float Cat to lake shore. Never attempt to use your Float Cat on moving waters.
Using The Wind: Wind can cause you problems until you practice these simple techniques for fishing from Your Float Cat in the wind. Always watch weather conditions and stay close to launch point in high winds or heavy storm conditions. If the wind get too strong to kick against, move to nearest land, wait out wind, or walk back to vehicle.
11.
For Your Information: Date Purchased: ___________________ Store Purchased: ___________________ Retain for your records Hobie Cat 4925 Oceanside Blvd., Oceanside, CA 92056 Tel: (760) 758-9100 Fax: (760) 758-1841 SAFETY PRECAUTIONS • Always wear a US.
An important point after buying a device Hobie 60 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobie 60 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobie 60 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobie 60 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobie 60 will certainly help you make a decision on the purchase.
If you already are a holder of Hobie 60, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobie 60.
However, one of the most important roles played by the user manual is to help in solving problems with Hobie 60. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobie 60 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
