Instruction/ maintenance manual of the product UW50 Hobart Welding Products
Go to page of 112
UW50 UTE NSIL WASHER (208 - 240/60/3) TECHNIC AL MANU AL SPECIFIC ATION SHEET INSTALL ATION INSTRUCTI ONS OPERATION INSTRUCTIONS CLEANING INS TRUCTI ONS M AI N T E N AN C E INSTRUCTI ONS TROUBLE SHOOT.
Need other Hobart Services? • Warranty Reg istr ation • Deliv ery and Instal latio n • Prev entiv e Maintena nce • Hobart S erv ice Cont rac ts • Extended Warranty Contracts • Parts a nd A.
Item # _____________________________________ Quantity ___________________________________ C.S.I. Section 11400 F-7551 – UW50 Utensil/Pan W asher Page 1 of 8 UW50 UTENSIL/P AN W ASHER 701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.
701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com Page 2 of 8 F-7551 – UW50 Utensil/Pan W asher UW50 UTENSIL/P AN W ASHER DET AILS & DIMENSIONS – ELECTRIC UW50 Untensil W.
701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com F-7551 – UW50 Utensil/Pan W asher Page 3 of 8 UW50 UTENSIL/P AN W ASHER DET AILS & DIMENSIONS – ELECTRIC UW50 Untensil W.
701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com Page 4 of 8 F-7551 – UW50 Utensil/Pan W asher UW50 UTENSIL/P AN W ASHER DET AILS & DIMENSIONS – GAS UW50 Untensil Washer.
701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com F-7551 – UW50 Utensil/Pan W asher Page 5 of 8 UW50 UTENSIL/P AN W ASHER DET AILS & DIMENSIONS – GAS UW50 Untensil Washer.
701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com Page 6 of 8 F-7551 – UW50 Utensil/Pan W asher UW50 UTENSIL/P AN W ASHER DET AILS & DIMENSIONS – STEAM INJECTOR/STEAM COI.
701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com F-7551 – UW50 Utensil/Pan W asher Page 7 of 8 UW50 UTENSIL/P AN W ASHER DET AILS & DIMENSIONS – STEAM INJECTOR/STEAM COI.
701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com Page 8 of 8 F-7551 – UW50 Utensil/Pan W asher As continued product improvement is a policy of Hobart, specications are subject to change without notice. UW50 UTENSIL/P AN W ASHER F-7551 (REV .
UW50 W AREW ASHING F-40057 (1 0/03) 1 Place strainer pan and scrap basket into position in the dishwasher tank. 2 Close the access door (automatically closes drains). 3 Tu rn selector switch to FILL and pr ess start. 4 Open door to r eset and load utensils on rack as necessary , slide rack into machine and close the door .
701 S. RIDGE A VENUE TROY , OHIO 45374-0001 937 332-3000 www .hobartcorp.com FORM 18241 Rev . G (Aug. 2007) UW50 UTENSIL W ASHER MODEL UW50 ML-27838 UW50 Untensil Washer 208-240/60/3 Page 12 of 112.
– 2 – ©HOBART , 2007 T ABLE OF CONTENTS GENERAL ....................................................................................................................... ....................................... 3 INST ALLA TION .....................
– 3 – INST ALLA TION, OPERA TION AND CARE OF MODEL UW50 UTENSIL W ASHER SA VE THESE INSTRUCTIONS GENERAL The UW50 Utensil W asher is the answer to volume utensil washing problems in your kitchen, bakery or supermarket operation.
– 4 – UW50 with 10KW Electric T ank Heat with or without 14KW Electric Booster – Installation Diagram: D-812969 sheet 1 UW50 Untensil Washer 208-240/60/3 Page 15 of 112.
– 5 – UW50 with Steam T ank Heat (Injector or Coil) with or without 14KW Electric Booster – Installation Diagram: D-812969 sheet 2 UW50 Untensil Washer 208-240/60/3 Page 16 of 112.
– 6 – UW50 with Gas T ank Heat with or without 14KW Electric Booster – Installation Diagram: D-812969 sheet 3 UW50 Untensil Washer 208-240/60/3 Page 17 of 112.
– 7 – PLUMBING CONNECTIONS Plumbing connections must comply with applicable sanitary , safety and plumbing codes. W ater Supply Connection W ater must be proper hardness. Recommended water hardness is 1 grain or less. Higher hardness may cause excessive formation of lime scale.
– 8 – VENTING REQUIRED WITH GAS HEA T (OPTIONAL WITH STEAM OR ELECTRIC HEA T) The Hobart UW50 Utensil W asher , equipped for gas tank heat, is not provided with a fl ue collar and is not intended to have the fl ue directly connected to a ventilation system.
– 9 – RA TE OF EXHAUST FLOW CALCULA TIONS (FIG. 2) Based on the International Mechanical Code (latest edition). Fig. 2 Canopy size and location The inside lower edge of canopy-type T ype I and II .
– 10 – DETERGENT FEEDER (OPTIONAL BY OTHERS) If installing a detergent feeder (by others), remove cap to expose 7 / 8 " diameter hole at rear of machine.
– 1 1 – Fig. 3 OPERA TION CONTROLS (FIG. 3) PL-56351 OFF START POWER CYCLE 2 4 6 SELECTOR SWITCH FILL NOTE: Opening the door during cycles will cause cycle to start over at the beginning. DRAIN LEVER (Fig. 4) Drain lever is located inside the wash chamber (middle front with door open).
– 12 – GENERAL OPERA TING INSTRUCTIONS Keep the utensil washer clean to provide best results. Do not allow foreign objects to enter the unit, especially metallic contaminants. Do not wash aluminum utensils in the utensil washer . The caustic detergent and high water temperature will cause aluminum oxide formation (black).
– 13 – DOS AND DON'TS FOR YOUR NEW HOBART UTENSIL W ASHER DO ensure proper water hardness (1 grain or less). T otal Dissolved Solids (TDS) must be 50 ppm or greater . Chlorides must not exceed 50 ppm. DO pre-scrap dishes thoroughly . DO use only detergents recommended by your chemical professional.
– 14 – MAINTENANCE Disconnect electrical power supply and follow lockout / tagout procedures. MOTOR The motor has permanently sealed bearings and requires no lubrication. W ASH AND RINSE ARMS All wash arms and rinse arms should turn freely and continue turning for a few seconds after being whirled by hand.
– 15 – TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE Utensils spotted or not clean Overloaded rack. Low water level. W ater conditions: — Incorrect rinse water temperature. Refer to W A TER SUPPL Y CONNECTION, page 7. — Excessive water hardness may indicate that a water softener is needed.
– 16 – FORM 18241 Rev G (Aug. 2007) PRINTED IN U.S.A. SERVICE In the event a gas ori fi ce fi tting shall be adjusted or replaced, have it serviced by quali fi ed personnel. Contact your Hobart service of fi ce for any repairs or adjustments needed on this equipment.
W ARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPL Y WITH THE APPLICABLE PORTIONS OF THE NA TIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.
DERIVED FROM F-33187 ELECTRICAL WIRING DIAGRAM CONTINUED UW50 UTENSIL W ASHER BUIL T AFTER NOV 2008 ELECTRICAL HEA T 208-240/60/3 AI 3138 LID-FRONT VIEW 1SS 1PB 1L T 2L T DPS1 DPS2 RPS1 RPS2 CONTROL BOX 2CON SST 1TB GND 3CR 1CON 1OL 1T 2TB 1FU VOL TS PHASE HEA TER NO.
2TB-2 VENT F AN CONTROL BOX UW50 CONTROL BOX WHT 10CON 0 1 POWER OR HOOD VENT VFC (1CON-L1) VFC (1CON-L2) VM 24 10CON 3FU 1.5AMP VENT F AN CONTROL CIRCUIT CONNECTION POWER VENT ONL Y TRANSFORMER CONNE.
ELECTRICAL WIRING DIAGRAM UW50 UTENSIL W ASHER BUIL T PRIOR TO DEC 2008 ELECTRICAL HEA T 208-240/60/3 DERIVED FROM F-28314 REV G AI 3135 W ARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPL Y WITH THE APPLICABLE PORTIONS OF THE NA TIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.
ELECTRICAL WIRING DIAGRAM CONTINUED UW50 UTENSIL W ASHER BUIL T PRIOR TO DEC 2008 ELECTRICAL HEA T 208-240/60/3 DERIVED FROM F-28314 REV G AI 3136 LID-FRONT VIEW 1SS 1PB 1L T 2L T DPS1 DPS2 RPS1 RPS2 .
W ARNING ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPL Y WITH THE APPLICABLE PORTIONS OF THE NA TIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. 1CON-NC 2TB-1 2TB-2 2TB-1 DERIVED FROM F-33023 WIRING DIAGRAM UW50 UNTENSIL W ASHER BUL T BEFORE SEPT .
UW50 UTENSIL W ASHER ML-27838 CA T ALOG OF REPLACEMENT P ARTS A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 18243 Rev . E (May 2009) UW50 Untensil Washer 208-240/60/3 Page 34 of 1.
- 2 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) © HOBART 2009 UW50 Untensil Washer 208-240/60/3 Page 35 of 112.
- 3 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) T able of Contents 5 VENT F AN CONTROL (PREVIOUS CONSTRUCTION) 7 VENT F AN CONTROL (PREVIOUS CONSTRUCTION) 9 VENT F AN CONTROL .
- 4 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) VENT F AN CONTROL (PREVIOUS CONSTRUCTION) 24 1-2 10 3 20 THRU 23 18-19 4-5 6-7 8-9 11-12-13 15-16-17 14 PL-57139 UW50 Untensil .
- 5 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) VENT F AN CONTROL (PREVIOUS CONSTRUCTION) ILLUS. P ART NO. NAME OF P ART AMT . PL-57139 *1 00-473429 Box – Electrical (Incls. Lid) .............................................
- 6 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) VENT F AN CONTROL (PREVIOUS CONSTRUCTION) PL-57137 1 2 3 4 5 6 17 18 19 9 16 14 12 13 15 8 10 11 7 UW50 Untensil Washer 208-240.
- 7 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) VENT F AN CONTROL (PREVIOUS CONSTRUCTION) ILLUS. P ART NO. NAME OF P ART AMT . PL-57137 1 00-328697 Bracket – T erminal Box Mounting ...........................................
- 8 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) VENT F AN CONTROL (CURRENT CONSTRUCTION) PL-58522 3 4 5 6 7 8 2 1 15 14 12 11 10 13 9 UW50 Untensil Washer 208-240/60/3 Page 41.
- 9 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) VENT F AN CONTROL (CURRENT CONSTRUCTION) ILLUS. P ART NO. NAME OF P ART AMT . PL-58522 1 00-918280 Plate – Base ................................................................
- 10 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) POWERED VENT F AN CONTROL PL-58354 19 20 21 22 23 24 18 16 17 1 4 3 5 6 2 8 9 10 11 12 13 14 7 15 UW50 Untensil Washer 208-240.
- 1 1 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) POWERED VENT F AN CONTROL ILLUS. P ART NO. NAME OF P ART AMT . PL-58354 1 SD-019-29 Self-T apping Screw 6-20 x 1 / 2 Phil. Pan Hd., T ype B ....................................
- 12 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) VENT EXHAUST ASSEMBL Y PL-58355 9 11 10 2-3 1 4 5 THRU 8 UW50 Untensil Washer 208-240/60/3 Page 45 of 112.
- 13 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) VENT EXHAUST ASSEMBL Y ILLUS. P ART NO. NAME OF P ART AMT . PL-58355 1 00-892250 Blade – Fan (10 1 / 2 -In. Wing) .............................................................
- 14 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) LOWER W ASH ARM (2 UNITS REQUIRED) (PREVIOUS CONSTRUCTION) 1 2 3 4 5 7 8 9 10 15 16 17 18 25 26 24 23 22 21 20 19 14 13 12 11 .
- 15 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) LOWER W ASH ARM (2 UNITS REQUIRED) (PREVIOUS CONSTRUCTION) ILLUS. P ART NO. NAME OF P ART AMT . PL-57140 1 SC-021-98 Mach. Screw 8-32 x 3 / 8 Phil. Rd. Hd. .....................
- 16 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) LOWER W ASH ARM (2 UNITS REQUIRED) (CURRENT CONSTRUCTION) 1 3 4 18 13 12 11 10 5 6 7 8 9 14 15 16 17 2 PL-59006 UW50 Untensil .
- 17 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) LOWER W ASH ARM (2 UNITS REQUIRED) (CURRENT CONSTRUCTION) ILLUS. P ART NO. NAME OF P ART AMT . PL-59006 1 00-893093-00001 Arm Assy . – Rinse (2 Per Machine) ..................
- 18 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) 4 6 8 9 5 15 12 10 11 20 21 2 1 3 7 19 14 13 16 17 18 PL-52120 UPPER W ASH ARM (2 UNITS REQUIRED) (PREVIOUS CONSTRUCTION) UW50.
- 19 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) UPPER W ASH ARM (2 UNITS REQUIRED) (PREVIOUS CONSTRUCTION) ILLUS. P ART NO. NAME OF P ART AMT . PL-52120 1 SC-041-09 Cap Screw 5 / 16 -18 x 1 / 2 Hex Hd. .......................
- 20 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) UPPER W ASH ARM (2 UNITS REQUIRED) (CURRENT CONSTRUCTION) 4 6 8 9 12 13 5 10 11 1 2-3 7 PL-59007 UW50 Untensil Washer 208-240/.
- 21 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) UPPER W ASH ARM (2 UNITS REQUIRED) (CURRENT CONSTRUCTION) ILLUS. P ART NO. NAME OF P ART AMT . PL-59007 1 SC-041-09 Cap Screw 5 / 16 -18 x 1 / 2 Hex Hd. ........................
- 22 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) OUTSIDE RINSE PIPING (WITHOUT BOOSTER) (PREVIOUS CONSTRUCTION) 9-10-11 12-13 14 15 16 17 18 19 20 21 THRU 24 25 1 THRU 4 5 6 2.
- 23 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) OUTSIDE RINSE PIPING (WITHOUT BOOSTER) (PREVIOUS CONSTRUCTION) ILLUS. P ART NO. NAME OF P ART AMT . PL-57142 1 00-186922 Strainer – Line 3 / 4 (Brass) ........................
- 24 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) OUTSIDE RINSE PIPING (WITHOUT BOOSTER) (CURRENT CONSTRUCTION) PL-59008 1 THRU 4 5 6-7-8 9 10 11 12 13 14 17 18 19 20 21 22 26 .
- 25 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) OUTSIDE RINSE PIPING (WITHOUT BOOSTER) (CURRENT CONSTRUCTION) ILLUS. P ART NO. NAME OF P ART AMT . PL-59008 1 00-186922 Strainer – Line 3 / 4 (Brass) .........................
- 26 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) OUTSIDE RINSE PIPING (WITH BOOSTER) (PREVIOUS CONSTRUCTION) 27-28-29 30-31 6 7 8 9 5 36 34 35 1 2 3 4 33 32 23 THRU 26 22 21 2.
- 27 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) OUTSIDE RINSE PIPING (WITH BOOSTER) (PREVIOUS CONSTRUCTION) ILLUS. P ART NO. NAME OF P ART AMT . PL-57143 1 FP-041-50 Pipe 3 / 4 x 1 3 / 8 Lg. TBE (Brass) ......................
- 28 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) OUTSIDE RINSE PIPING (WITH BOOSTER) (CURRENT CONSTRUCTION) PL-59009 1 2 3 4 5 6 7 8 9 15 14 10 THRU 13 16 35 37 36 34 33 20 21.
- 29 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) OUTSIDE RINSE PIPING (WITH BOOSTER) (CURRENT CONSTRUCTION) ILLUS. P ART NO. NAME OF P ART AMT . PL-59009 1 FP-087-32 Fitting – Hose ...........................................
- 30 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) UPPER INSIDE RINSE PIPING ILLUS. P ART NO. NAME OF P ART AMT . PL-50502 1 00-122402-00002 Flange ................................................................................
- 31 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) LOWER INSIDE RINSE PIPING ILLUS. P ART NO. NAME OF P ART AMT . PL-50503 1 SC-041-10 Cap Screw 5 / 16 -18 x 5 / 8 Hex Hd. ........................................................
- 32 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) MANIFOLD FLANGE PIPING (USE WITH BOOSTER) ILLUS. P ART NO. NAME OF P ART AMT . PL-51397 1 00-067500-00012 O-Ring ................................................................
- 33 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) ELECTRIC BOOSTER ILLUS. P ART NO. NAME OF P ART AMT . PL-57144 1 00-812347 Booster ..............................................................................................
- 34 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) W ASH PUMP (PREVIOUS CONSTRUCTION) 1 2 3-4 5 6 7 9 10 11 12 13-14-15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 THR.
- 35 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) W ASH PUMP (PREVIOUS CONSTRUCTION) ILLUS. P ART NO. NAME OF P ART AMT . PL-57145 1 NS-015-1 1 Nut 5 / 16 -18 Hex ................................................................
- 36 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) W ASH PUMP (CURRENT CONSTRUCTION) PL-58356 1 2 3 4 5 6 7 9 8 11 21 18 17 24 20 19 12 14 15 16 25 26 10 13 23 22 UW50 Untensil .
- 37 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) W ASH PUMP (CURRENT CONSTRUCTION) ILLUS. P ART NO. NAME OF P ART AMT . PL-58356 1 NS-015-1 1 Nut 5 / 16 -18 Hex (SST) ...........................................................
- 38 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) W ASH DUCT ILLUS. P ART NO. NAME OF P ART AMT . PL-57146 1 00-163384-00002 W ash Pipe ...........................................................................................
- 39 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) DOOR INTERLOCK ILLUS. P ART NO. NAME OF P ART AMT . PL-57147 1 00-436072 Cover – Housing ......................................................................................
- 40 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) 5 6-7 8 9 10 11 60 12 13 14 15 16 17 18 19 22 23 24 25 26 20 Current Construction 28 27 29 30 31 34 35 38 39 36 37 40 41 42 43.
- 41 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) CHAMBERS, DOORS, AND TRACKS (CONT .) ILLUS. P ART NO. NAME OF P ART AMT . PL-57148 6 00-163193 Support – Upper Door (Previous Construction) (Not Shown) .......................
- 42 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) 1 CON 2 CON L1 L2 L3 1 TB GROUND X1 X2 C1 C3 C1 C3 81 THRU 85 74 THRU 78 33-34 35-36-37 38-39 40 41 42 44-45 46 47-48 56 57 58.
- 43 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) CONTROL BOX (PREVIOUS CONSTRUCTION) (CONT .) ILLUS. P ART NO. NAME OF P ART AMT . PL-57149 23 00-47581 1 Board – T emperature Control..........................................
- 44 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) 76 THRU 80 72 THRU 75 35-36 37-38-39 40-41 42 44 45 47-48 46 49 50-51 54 55 56 57 58 52 53 60 61-62-63 69 70-71 64 65 66 67 68 43 1-2 3 THRU 8 10-1 1 12-13-14 15 THRU 18 19 THRU 24 25 THRU 28 29 THRU 32 33-34 9 59 PL-58357 CONTROL BOX (CURRENT CONSTRUCTION) ILLUS.
- 45 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) CONTROL BOX (CURRENT CONSTRUCTION) (CONT .) ILLUS. P ART NO. NAME OF P ART AMT . PL-58357 24 SD-008-25 Self-T apping Screw 10-16 x 1 / 2 Phil. Pan Hd., T ype B .................
- 46 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) ELECTRIC HEA T 1 THRU 4 6 TANK WALL 23 22 21 13 15 26 27 28 29 30 31 32 5 16 12 17 18 19 20 14 11 7 8 9 10 24 - 25 PL-57150 UW.
- 47 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) ELECTRIC HEA T ILLUS. P ART NO. NAME OF P ART AMT . PL-57150 1 00-086444 Insulator – T erminal (Above 250 V .) ................................................................
- 48 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) STEAM INJECTOR HEA T PL-57151 T ANK ASSY . 18 1 5 12 14 19 20 32 33 34 21 22 23 24 26 27 4 17 28 THRU 31 7 6 2 3 16 8 THRU 1 1.
- 49 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) STEAM INJECTOR HEA T ILLUS. P ART NO. NAME OF P ART AMT . PL-57151 1 FP-085-05 Pipe 1 x 10 1 / 2 STOE (SST) .....................................................................
- 50 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) STEAM COIL HEA T PL-57169 35 34 33 32 31 30 29 39-40-41 42 48 47 1 49 43 THRU 46 16 23 24 21 17 14 13 15 38 11 10 18 20 19 22 .
- 51 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) STEAM COIL HEA T ILLUS. P ART NO. NAME OF P ART AMT . PL-57169 1 FE-024-65 Connector 90 Deg. (Nometallic) (Sealtite) ( 1 / 2 Male)...............................................
- 52 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) GAS HEA T IMMERSION TUBE, SHROUD, AND FLUE 12 10 14 THRU 19 4 1-2-3 PL-57152 6 THRU 9 11 5 13 UW50 Untensil Washer 208-240/60/.
- 53 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) GAS HEA T IMMERSION TUBE, SHROUD, AND FLUE ILLUS. P ART NO. NAME OF P ART AMT . PL-57152 1 WS-003-49 Washer .....................................................................
- 54 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) CONTROL BOX (GAS HEA T) PL-58358 1 2-3-4 5-6 9-10-11 12 15 16-17 13-14 18-19-20 21-22-23 7 8 UW50 Untensil Washer 208-240/60/3.
- 55 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) CONTROL BOX (GAS HEA T) ILLUS. P ART NO. NAME OF P ART AMT . PL-58358 1 00-812480 Box – Control ...............................................................................
- 56 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) GAS HEA T COMPONENTS 4 2 1 10-11 12-13 5 24-25 26 27 28-29 30 35 50 51 54 55 56 58 59 60 61-62 63 14 THRU 17 52-53 46 THRU 49 .
- 57 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) GAS HEA T COMPONENTS ILLUS. P ART NO. NAME OF P ART AMT . PL-521 18 1 RR-010-13 Retaining Ring ..................................................................................
- 58 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) STRAINERS AND DRAIN 2 1 3 4 5 6 7 8 9 10 11 12 13 15 17 18 19 20 21 22 23 16 14 PL-50498 UW50 Untensil Washer 208-240/60/3 Pag.
- 59 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) STRAINERS AND DRAIN ILLUS. P ART NO. NAME OF P ART AMT . PL-50498 1 SC-1 14-15 Mach. Screw 10-24 x 3 / 8 Phil. Rd. Hd. (SST) ....................................................
- 60 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) LOW W A TER PROTECTION (STEAM HEA T/W ASH T ANK) ILLUS. P ART NO. NAME OF P ART AMT . PL-57154 1 RR-010-13 Retaining Ring .......................................................
- 61 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) BOOSTER CONTROL BOX ILLUS. P ART NO. NAME OF P ART AMT . PL-57155 1 00-47581 1 Board – T emperature Control....................................................................
- 62 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) THERMOMETER UNIT (WITHOUT BOOSTER) ILLUS. P ART NO. NAME OF P ART AMT . PL-57156 1 00-107218 Coupling – Thermometer Bulb ......................................................
- 63 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) THERMOMETER UNIT (WITH BOOSTER) ILLUS. P ART NO. NAME OF P ART AMT . PL-57157 1 00-107218 Coupling – Thermometer Bulb .........................................................
- 64 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) FRAMES AND P ANELS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 PL-51403 UW50 Untens.
- 65 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) FRAMES AND P ANELS ILLUS. P ART NO. NAME OF P ART AMT . PL-51403 1 00-163217 Trim – Panel .....................................................................................
- 66 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) SPRA Y HOSE PL-57170 18 13 12 10-11 19 20 21 24 23 25 26 1 2 3 4 5 7 9 8 22 17 16 15 14 6 UW50 Untensil Washer 208-240/60/3 Pa.
- 67 - UW50 UTENSIL W ASHER REPLACEMENT P ARTS F-18243 Rev . E (May 2009) SPRA Y HOSE ILLUS. P ART NO. NAME OF P ART AMT . PL-57170 1 FP-015-23 Elbow 3 / 4 x 90 Deg. .....................................................................................
FORM 18243 Rev . E MA Y 2009 PRINTED IN U.S.A. UW50 UTENSIL W ASHER REPLACEMENT P ARTS RACKS ILLUS. P ART NO. NAME OF P ART AMT . PL-57158 1 00-172829 Insert – Tray ....................................................................................
User Guide Online Parts Catalog Section 1 – If Equipment ML Number is known Section 2 – If Equipment ML Number is not known Note: It is helpful, but not essential to know the ML (Material List) Nu.
User Guide Next select SMARTPARTS From hobartservice.com select PARTS Web Browser Pop -up blocker mus t be turned off for this s ite in order for SmartParts to operate UW50 Untensil Washer 208-240/60/.
This is SmartParts home page If the ML Number of the Equipment is known , select Use SmartParts Now (We’ll explain w hat to do if the ML number of the Equipment is not known in Section 2) Enter the .
• Click on the Radio button to select the Parts Catalog Then click on Continue The Water Pressure Gauge is on the Base Assembly Select Base Assembly Then click on Continue Section 1 – If Equipment.
• Select an appropriate figure size Locate the part ne eded (Water Pressure Gauge) on the drawing Placing the cursor on the number will display the Description of the Part Click on the number pointi.
• Selecting the part on the figure causes the part to be highlight e d on the parts list • Click on the Add butto n to add the part to the shoppin g cart • You can add more parts or change the q.
Section 2 – If Equipment ML Number is not known This (again ) is SmartParts home page For this example, the part needed is a Water Pressure Gauge used on the LX 30 Undercounter Dishwasher If the ML .
Click on the Radio button to select LX Series Dishwashers Then click on Continue Section 2 – If Equipment ML Number is not known The Water Pressure Gauge is on the Base Assembly Select Base Assembly.
Locate the part ne eded (Water Pressure Gauge) o n the drawing Placing the cursor on the number will displ ay the Description of the Part Click on the num ber pointing to the part Section 2 – If Equ.
• Selecting the part on the figure causes the part to be highlight e d on the parts list • Click on the Add butto n to add the part to the shoppin g cart • You can add more parts or change the q.
UW50 November 2010 PRODUCT SERVICE DEPARTMENT TROY, OH. 45374-0001 RECOMMENDED SPARE PARTS LIST UW50 DISHWASHER (208/240 V 3 Phase) Qty . Part Number Description 3 271002-1 Solenoid Valve 3/4 (110-120.
An important point after buying a device Hobart Welding Products UW50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart Welding Products UW50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart Welding Products UW50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart Welding Products UW50 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart Welding Products UW50 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart Welding Products UW50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart Welding Products UW50.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart Welding Products UW50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart Welding Products UW50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
