Instruction/ maintenance manual of the product ML-136134 Hobart
Go to page of 8
701 S. RIDGE A VENUE TROY , OHIO 45374-0001 937 332-3000 www .hobartcorp.com F-35216 (Dec. 2006) HOBAR T HOBHL2 Heat Lamp ML-136134 INCLUDES REPLACEMENT PA R T S.
– 2 – © HOBART , 2006 Installation, Operation and Care of the Hobart HOBHL2 Heat Lamp SA VE THESE INSTRUCTIONS GENERAL The HOBHL2 Heat Lamp is used in conjunction with a 2912B Slicer to maintain cooked roast beef to an internal temperature above 140°F for up to 30 minutes while slicing.
– 3 – Fig. 1 Fig. 2 Fig. 3 1. Place skid plate on table where slicer is to be located. 2. Make sure there is suf fi cient room on the table to support the front feet of the slicer (the feet on the index knob end of slicer) before drilling holes for the skid plate.
– 4 – Fig. 4 OPERA TION W ARNING : THE HEA T LAMP AND ITS P ARTS ARE HOT AND CAN CAUSE BURNS. USE CARE WHEN OPERA TING, CLEANING AND SER VICING. Set-Up 1. Place Optional Portable Platter on the slicer (Fig. 4). 2. The Main Heat Source is fi xed in position over the slicer Carriage T ray (Fig.
– 5 – CLEANING W ARNING : UNPLUG POWER CORD AND ALLOW HEA T LAMP T O COOL. CAUTION: Do not raise slicer until cool to prevent damage to plastic components on the slicer . Remove the optional portable platter and move the front heat lamp gooseneck away from the slicer before raising the slicer up on the lift lever .
– 6 – 9 8 11 12 10 7 6 5 48 47 46 43 44 1 39 34 33 26 14 13 29 31-32 45 42 40 38 41 30 27 28 17 15-16 19 35 20 22 23 21 24 25 36-37 18 3 2 4 PL-58198 HOBART HEA T LAMP MAINTENANCE SERVICE Contact your local Hobart authorized service of fi ce for any repairs, adjustments or replacement parts.
– 7 – HOBART HEA T LAMP ILLUS. P ART NO. NAME OF P ART AMT . PL-58198 1 00-914161 Emitter – Full T rough (FTE) (With Spring Clip) .......................................................................... 1 2 00-914137 De fl ector – Emitter .
– 8 – FORM 35216 (Dec. 2006) PRINTED IN U.S.A. NOTES.
An important point after buying a device Hobart ML-136134 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart ML-136134 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart ML-136134 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart ML-136134 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart ML-136134 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart ML-136134, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart ML-136134.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart ML-136134. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart ML-136134 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center