Instruction/ maintenance manual of the product ML-132064 Hobart
Go to page of 12
701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 34846 (Mar. 2003) HR T O RE-THERMALIZA TION O VEN MODEL HRTO M L-132064 MODEL HRTO.
– 2 – TABLE OF CONTENTS GENERAL ............................................................................................................................................. 3 INSTALLATION ..........................................................
– 3 – Installation, Operation and Care of HR T O Re-Thermalization Oven SA VE THESE INSTRUCTIONS GENERAL Hobart HRTO Re-Thermalization Ovens feature full view, tempered glass doors and stainless steel interior and exterior for ease of cleaning.
– 4 – Fig. 1 INSTALLATION CODES AND STANDARDS The HRTO Re-Thermalization Oven must be installed in accordance with: In the United States of America: 1 . State and local codes. 2 . National Electrical Code, ANSI/NFPA-70 (latest edition). Copies may be obtained from The National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
– 5 – ELECTRICAL CONNECTION WARNING : ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. Stacked Ovens The HRTO can be stacked with model HR7 Rotisserie Oven using the stacking kit (purchased separately).
– 6 – OPERA TION WARNING: HOT GLASS AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE OVEN. CONTROLS (Fig. 2) Fig. 2.
– 7 – Thermometer - Displays temperature inside of the oven in °F. Timer dial - Sets the preheat/ re-thermalization time. (The timer must be set to heat oven.
– 8 – PREHEAT OVEN 1 . Turn temperature dial to the desired setting (Fig. 4) 2 . Turn the timer dial to 120 minutes (Fig. 5). (The timer must be set to heat oven.
– 9 – UNLOADING (Fig. 8) 1 . When timer dings, open the oven door. 2 . Use a thermometer to check if product has reached the desired temperature. Set additional time if needed. 3 . Use insulated gloves to remove the product. 4 . Place product into warming cabinet immediately.
– 10 – END OF DAY WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW LOCKOUT / TAGOUT PROCEDURES. CAUTION: Do not spray cleaners on heating coil or lamp bulbs. CAUTION: Do not use oven cleaners or high-pressure hoses to clean oven.
– 11 – 7 . Wipe the interior of the oven with warm, soapy water using a sponge or soft cloth. Rinse thoroughly and wipe dry with a soft, clean cloth. CAUTION: D o not soak drip pan. Do not clean in a commercial dishwasher. Drip pan contains insulation.
– 12 – MAINTENANCE WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW LOCKOUT / TAGOUT PROCEDURES. WARNING: HOT GLASS AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE OVEN. Do not touch lamps with your bare hands.
An important point after buying a device Hobart ML-132064 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart ML-132064 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart ML-132064 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart ML-132064 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart ML-132064 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart ML-132064, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart ML-132064.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart ML-132064. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart ML-132064 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
