Instruction/ maintenance manual of the product HRO550P Hobart
Go to page of 16
– 1 – 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com I N S T R U C T I O N S FORM 33669 Rev. A (June 2000) HR O SERIES R O TISSERIE O VENS & HR W SERIES R O TISSERIE.
– 2 – Models HRO101 and HRO220 Oven Model HRO330 Oven Models HRW101 and HRW220 Oven/Warmer Model HRW330 Oven/Warmer Model HRO550 Double Oven © HOBART CORPORATION, 1992.
– 3 – Installation, Operation and Care of HRO & HR W SERIES ROTISSERIE OVENS SA VE THESE INSTRUCTIONS GENERAL The HRO and HRW Series Rotisserie Ovens and Warmers feature stainless steel interior and exterior for ease of cleaning.
– 4 – INST ALLA TION Immediately after unpacking the oven, check for possible shipping damage. If the oven is found to be damaged after unpacking, save the packaging material and contact the carrier within 15 days of delivery.
– 5 – ELECTRICAL CONNECTIONS WARNING : ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING : DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT.
– 6 – OPERA TION WARNING : HOT GLASS, GREASE, AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING AND SERVICING THE OVEN. OVEN CONTROLS (Fig. 3) Automatic Controls — S EE PAGES 7 AND 8. Display — S HOWS TEMPERATURE ( ° F) AND TIME (HH:MM). Automatic : Colon flashing, cooking time remaining is shown.
– 7 – AUTOMATIC CONTROLS (Fig. 4) Automatic Controls can regulate the roasting temperature, stop cooking at a preset time, or allow the buzzer to be timed. The last entered Temperature and Roasting Time is always retained in memory by the Automatic Controls.
– 8 – Interrupting an Automatic Cooking Operation If you want to temporarily interrupt an Automatic Cooking Operation, press ON. • The On lamp flashes. Colon stops flashing. • The Rotisserie stops. • Heat lamps and elements go off. • The Automatic Control retains the set temperature and the remaining roasting time.
– 9 – PROGRAMMABLE CONTROLS (Fig. 5) The programmable control (Models HRO220P, HRW220P, HRO330P, HRW330P and HRO550P) allows you to program three different functions for each of the 5 menu buttons. The three functions are Cook, Grill, and Warm/Hold.
– 10 – Programming Menu Buttons 1. Before entering the program mode, you must first press a Menu Button. Press Menu Button #1. Its LED will light. 2. To enter Program mode, press and hold both and simultaneously until the time display shows "PROG" (approximately 2 seconds).
– 11 – of the processing cycle. The temperature display will show the actual cavity temperature until the temperature reaches the setpoint, then it will display the programmed temperature.
– 12 – If after pressing the end time comes earlier than the current time + the program time, a beep will sound (for three minutes) and the program will not start. The programmed end time is now cancelled, and when is pressed again, the program starts in the normal way.
– 13 – PL-40819-1 Model HRO330 Oven With Baskets and Spits Leave One Empty Space Between Spit and Basket Holes for Spit Pins Spit Basket Tying Legs (Fig. 7) Tie the legs of chicken or cornish hen together if desired. Baskets Make sure product in baskets does not stick out of the basket.
– 14 – Unloading the Oven Opening the door does not stop the rotisserie or cooking process. Turn rotisserie Off. Remove spits or baskets. Advance rotation by turning rotisserie to Manual. Remove the next utensil. Emptying the Grease Drawer (Fig. 9) Empty the grease drawer when necessary.
– 15 – Thermometer — Displays temperature in degrees Fahrenheit. Thermostat — 0 is OFF. Turn dial to desired temperature. USING THE WARMERS (Models W101, W220 and W330) Fill the warmer drawer with cold water about three-quarters full to minimize steaming.
– 16 – MAINTENANCE WARNING : UNPLUG ELECTRICAL POWER SUPPLY BEFORE PERFORMING ANY MAINTENANCE. WARNING : HOT GLASS, GREASE, AND PARTS CAN CAUSE BURNS.
An important point after buying a device Hobart HRO550P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart HRO550P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart HRO550P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart HRO550P you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart HRO550P will certainly help you make a decision on the purchase.
If you already are a holder of Hobart HRO550P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart HRO550P.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart HRO550P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart HRO550P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
